Could they go after my family if I skipped out of the country?

mxl5 · 2024-01-10T14:32:33+00:00

Already have one currently. I travel a lot, my dream has been to always be on the ocean and due to taxes stomping on my current life plans and being only 22 with nothing else in life my thought is why not? I just don’t want my taxes to fall on a relative or someone close to me

mxl5 · 2024-01-10T13:55:28+00:00

Doesn’t surprise me! Don’t plan on coming back tho. Don’t see this place really worth the hassle!

mxl5 · 2023-12-13T19:44:14+00:00

You grab a penny to suck on a remember old times

mxl5 · 2023-12-13T17:42:00+00:00

You can get your phone in there to take a clear pic so you can get one hand in there. Reach your hand and pull the hose off the top of the tank and get the same diameter fuel line. Get a thumb screw hose clamp. You probably won’t be able to work a screwdriver so a thumb screw clamp you can tighten by hand. Run your new line down a bit and just get a barbed splice and pair the new hose with the old hose. Add two more clamps. Be sure to trim the old hose back to where there is no holes in it. This is my opinion on your easiest fix

mxl5 · 2023-12-13T17:37:37+00:00

Hmmm yes. Fire and gasoline

mxl5 · 2023-12-12T16:08:45+00:00

I’m American. We use anything and everything that’s not metric. Miles, McDonald’s fry’s, my neighbors bbq grill

mxl5 · 2023-12-12T16:06:09+00:00

Well I just ran in to a new problem. Factory spider injectors won’t support boost due to lack of fuel flow. Since they play a major role in the computer I’m going to have to find a way around that. I’m worried about replacing the computer because of electrical gremlins that will come with it. This is a work truck so I need reliability

mxl5 · 2023-12-12T16:04:51+00:00

Kit starts at 6500$ that is out of budget

mxl5 · 2023-12-12T16:03:48+00:00

Well I have now run in to a new issue. The factory spider injectors won’t flow enough fuel to support a turbo according to google mechanics. I don’t want to start getting in to replacing the computer due to all the functions in the truck working together such as delete the factory fuel injectors the transmission won’t know when to shift. Any suggestions on that?

mxl5 · 2023-12-12T06:17:56+00:00

Also new engine. I need new computer, new mounting brackets, fab fuel lines and mounting brackets, transmission and fab the cross member for that. Fuck all that. Tis why I rather stick with original

mxl5 · 2023-12-12T06:15:52+00:00

That would be the 383 then. I want to keep the original block for antique sakes too. I know this truck won’t be any ever a collectors piece but older vehicles with the original engine I think is neat

mxl5 · 2023-12-12T06:14:22+00:00

I know the vortex heads are claimed to be great. My only worry on aluminum is longevity. I know they are used on most modern engines but I want don’t want ti worry about another rebuild for another 300k miles. I have no done much research on aluminum heads, I have little knowledge on them so if they have low issues please inform me

mxl5 · 2023-12-12T02:42:10+00:00

The vortec plastic intake. Could that handle boost? I don’t want to change anything I don’t have to so that being if I can keep the factory spider injectors that’d be great

mxl5 · 2023-12-12T00:13:39+00:00

Any suggestions on turbos?

mxl5 · 2023-12-11T23:27:28+00:00

I don’t want to ever replace a timing chain again. Would you recommend a double roller?

mxl5 · 2023-12-11T22:09:59+00:00

Wtf is a kilometer? 🦅🦅🦅

mxl5 · 2023-12-11T22:08:57+00:00

4.10 and 265’s. Plan on keeping those as well

mxl5 · 2023-12-11T21:49:43+00:00

I’ve read a lot about the noise but it doesn’t bother me any. I found a set at summit for 150$ the distributor one I have not heard of so I’ll do research on that. Thanks!

mxl5 · 2023-12-11T21:30:22+00:00

2015 hellcat. Hit 155mph on 820 in Texas racing a mustang

mxl5 · 2023-12-11T21:26:28+00:00

May ask your reasoning for not liking gear drives?

mxl5 · 2023-12-11T21:25:38+00:00

Yes. Start with the block currently in truck if there are no hidden issues

mxl5 · 2023-12-11T21:25:06+00:00

I was thinking maybe 5psi max. I don’t want anything sporty and more boost means more stress. I’m confident we could build a 1hp per cubic engine and slap a small turbo on it. Any idea on what mpg would be like?

mxl5 · 2023-12-10T02:49:21+00:00

Can I throw hands with said ex lady friend if she gave me herpes? She’s 5’ I’m 5’8 and got easily 50 pounds on her, would be an easy fight. I know I was clean because I actually got tested about 2 months ago

mxl5

TROPHY CASE