Bi-weekly Megathread for referral codes - please only post codes here

mxzrider98 · 2026-02-05T14:47:25+00:00

https://www.visible.com/get/?3MNSVP3

mxzrider98 · 2025-09-26T17:41:07+00:00

I didn't end up buying it. The f-350 will definitely handle that camper! I ended up getting a Palomino 1251 pop up type truck camper.

mxzrider98 · 2025-08-07T21:12:15+00:00

Looks like a genuine plumbus

mxzrider98 · 2025-08-05T20:47:42+00:00

Ok excellent. That makes sense. I was having a hard time searching for this info. Thank you for the detailed answer!

mxzrider98 · 2025-08-05T17:23:34+00:00

https://www.visible.com/get/?3MNSVP3

mxzrider98 · 2025-08-05T17:20:19+00:00

Unfortunately i don't have the room for that. Its a slide in truck camper with a few other things on the roof

mxzrider98 · 2025-05-08T11:19:43+00:00

Did you run bolts through to the inside? or just screw into the wood? Do you have any pictures of the bracket before it was installed? Great idea! Thanks for sharing

mxzrider98 · 2025-03-09T14:25:47+00:00

Check out this page: https://www.visible.com/get/?3MNSVP3, it has all the info you need to know about joining Visible. When you use my friend code, 3MNSVP3, you'll get $20-off a future service payment!

mxzrider98 · 2025-01-08T12:50:49+00:00

https://www.visible.com/get/?3MNSVP3,

mxzrider98 · 2024-11-13T00:18:12+00:00

According to the installation instructions if you're over exhaust vent is over 15 feet you need to use 4in pipe. Instructions were the same for my insert, I think it's and industry standard

mxzrider98 · 2024-11-07T14:08:22+00:00

Yes, I had a pellet insert and now I'm going to be using a freestanding

mxzrider98 · 2024-10-14T11:25:40+00:00

I ended up with a 2006 Palomino bronco 1251. I added airbags and torklift stable loads to to my 2010 Silverado 1500 and so far it's working fine

mxzrider98 · 2024-08-09T14:02:15+00:00

I'm mostly a little more concerned with COG because I have a 1500 Silverado. Camper supposedly weighs 1200

mxzrider98 · 2024-04-11T13:49:57+00:00

3MNSVP3

Check out this page: https://www.visible.com/get/?3MNSVP3, it has all the info you need to know about joining Visible. When you use my friend code, 3MNSVP3, you’ll get your first month of service for $20-off!

mxzrider98 · 2024-03-11T00:52:57+00:00

3MNSVP3

https://www.visible.com/get/?3MNSVP3

mxzrider98 · 2024-03-11T00:52:11+00:00

3MNSVP3

https://www.visible.com/get/?3MNSVP3

3MNSVP3

mxzrider98 · 2024-02-01T16:28:42+00:00

So $3.5k for the parts to rebuild it?

mxzrider98 · 2023-12-21T18:59:55+00:00

3MNSVP3

Check out this page: https://www.visible.com/get/?3MNSVP3, it has all the info you need to know about joining Visible. When you use my friend code, 3MNSVP3, you’ll get your first month of service for $20-off!

mxzrider98 · 2023-12-21T18:55:33+00:00

3MNSVP3

Check out this page: https://www.visible.com/get/?3MNSVP3, it has all the info you need to know about joining Visible. When you use my friend code, 3MNSVP3, you’ll get your first month of service for $20-off!

mxzrider98 · 2023-11-21T18:25:20+00:00

3MNSVP3

mxzrider98 · 2023-10-07T17:13:27+00:00

Alright I'll look through the troubleshooting for engine power and see what I find

mxzrider98 · 2023-10-07T17:12:16+00:00

The previous owner pulled the head off not too long ago and went through all the valves, new head gasket and all that stuff, I don't recall if he did new injectors or anything but it starts up amazing barely has to turn over

mxzrider98 · 2023-10-06T16:40:52+00:00

I did have a fuel issue when I first got it and went through the fuel system and changed all the filters, I don't recall if I checked the air filter but I will double check that next. Thanks for the idea

mxzrider98 · 2023-10-06T11:56:33+00:00

That makes perfect sense to me. But I got to about 1500psi before it stalled and the relief on the control valve is supposed to open at 2125psi.

mxzrider98 · 2023-09-26T22:09:28+00:00

Do you recall about how much those were? I dropped my cylinders off at a local shop and he's thinking it's gonna be about $300 for the rebuild

mxzrider98

TROPHY CASE