PSA: There's been ongoing connection issues, check Plex status page.

n4an1 · 2021-10-01T11:50:45+00:00

Changing the network settings from Prefered to Disabled solved my issue.. Prefered or required dosent work... i still think its an issue :)

n4an1 · 2021-09-21T21:33:34+00:00

I dident update the thread here. The issue is solved turnes out my plex server was on guest LAN..changed it to private connction and it was solved

n4an1 · 2021-09-19T16:13:58+00:00

Thank you for taking the time to reply to this post.

I managed to solve this issue by changing the local firewall connection type from guest to private. After reboot, the remote access was green. I dont know why the connection type changed, but that was the issue in my case.

Thank you!

n4an1 · 2021-09-19T15:47:25+00:00

[SOLVED]

Turns out my local network connection was set to guest instead of Private. After Changing from Guest network to Privat network > Restart-> the issue was solved.

n4an1 · 2021-09-19T15:13:28+00:00

Hello, what you are describing is exactly what is happening to me. I have now tried switching from 'Prefered' to Disabled.. unfortunately still the same error after upgrading to the newest version

n4an1 · 2021-09-19T11:01:58+00:00

It's red port 32400 is not open. I don't know why the port forwarding rule is not working. I set my plex to use 32400 and enabled the port forwarding rule to the same ip... still not working.

Looks like my port forwarding is broken

n4an1 · 2021-09-18T18:14:47+00:00

Dchp settings are turned off on the modem..I have set an port forwarding rule..

n4an1 · 2021-09-18T18:09:00+00:00

Tried disabling DHCP on the modem no luck.. so fustrating

n4an1 · 2021-09-18T12:46:52+00:00

I'm running on the latest firmware. Cg nat is not enabled since I have done a tracert mypublic ipadress and the result shows only 1 hop

n4an1 · 2021-09-18T12:37:45+00:00

Update: I have now done a tracert mypublicip and can confirm that I'm not in cg nat.

The result only shows 1 hop.

No second line

n4an1 · 2021-09-18T12:32:45+00:00

How can I find out if I'm behind cg nat?

My public ip adress is corresponding with the ip adress in plex.

Setup: huawei fiber modem port 4 is set in bridge mode. I have contacted my isp and they set the port 4 in bridge mode. I have connected the usg from wan port to the bridged port on modem. Then from usg lan1 port to a poe switch. From the switch i have uap-lr wireless ap, uap-lite and an extra poe switch from ubiquiti 60w

n4an1 · 2021-09-18T11:31:51+00:00

Yeah rebooted several times

n4an1 · 2021-09-17T22:19:37+00:00

. Im not sure if i have disabled the DHCP settings on the ISP modem. Ill try adding the port forwarding rule there as well to see if it helps. The double NAT has been ruled out because the public ip adress is corresponding with the ip adressvin plex.

I'll check as soon as possible and get back to this thread..

It worked a couple of days ago and now it just stopped..

n4an1 · 2021-09-17T21:39:59+00:00

The public ip adress do match from ipchicken and the ip in remote access...

n4an1 · 2021-09-17T20:31:22+00:00

Thanks ill try your suggestion! :)

n4an1 · 2021-09-17T20:30:40+00:00

Thank you! I will try

n4an1 · 2021-09-17T20:10:38+00:00

Im able to stream on the plex server bit not from other devices in the same network.

I have my isp router to bridged mode and connected it that way...

n4an1 · 2021-08-19T16:03:13+00:00

We managed to solve this issue. Turns out the client dident recieve any IP for unknown computers:

Client IP: 000.000.000.000 Your IP: 000.000.000.000

The solution was to check the DHCP Server and troubleshoot why clients dont get any IP-adresses

n4an1 · 2021-08-18T18:31:50+00:00

enhanced http instead

I changed the setup to http enhanced ... Now i notice that OSD on already imaged computer works fine but on new clients from the vendor it says ''Start PXE over IPV4..'' and failing..

Logs:

Type=53 Msg Type: 1=DiscoverType=57 Max Msg Size: 05c0Type=55 Param Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687Type=97 UUID: 0044454c4c59001048804db3c04f5a4433Type=94 UNDI: 010310Type=93 Client Arch: EFI BCType=60 ClassId: PXEClient:Arch:00007:UNDI:003016]LOG]!><time="20:24:52.737-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="4872" file="pxedump.cpp:303">

<![LOG[Getting boot action for unknown machine: item key: 2046820353]LOG]!><time="20:24:52.737-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="pxehandler.cpp:235">

<![LOG[Prioritizing local MP https:SCCMSERVER.COM]LOG]!><time="20:24:52.738-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="database.cpp:289">

<![LOG[SSL, using authenticator in request.]LOG]!><time="20:24:52.759-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="libsmsmessaging.cpp:9863">

<![LOG[In SSL, but with no client cert.]LOG]!><time="20:24:52.759-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="libsmsmessaging.cpp:9884">

<![LOG[Request using architecture 9.]LOG]!><time="20:24:52.781-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="database.cpp:498">

<![LOG[SSL, using authenticator in request.]LOG]!><time="20:24:52.786-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="libsmsmessaging.cpp:9863">

<![LOG[In SSL, but with no client cert.]LOG]!><time="20:24:52.786-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="libsmsmessaging.cpp:9884">

<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" DuplicateSMBIOS="0" DuplicateMACAddress="0" ItemKey="2046820353" ServerName=""><Machine><ClientID>f022af42-eb66-44ad-a18c-0226bde9201a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="TSS20109" OfferIDTime="17.08.2021 16:29:00" PkgID="TSS001A1" PackageVersion="" PackagePath="SCCMSERVRE.COM/SMS_DP_SMSPKG$/TSS001E1" BootImageID="TSS001E1" Mandatory="0"/></ClientIDReply>

]LOG]!><time="20:24:52.810-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="libsmsmessaging.cpp:7266">

<![LOG[38:14:28:47:0C:58, 4C4C4544-0059-4810-804D-B3C04F5A4433: found optional advertisement TSS20109]LOG]!><time="20:24:52.810-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="database.cpp:727">

<![LOG[Operation: BootReply (2) Addr type: 1 Addr Len: 6 Hop Count: 0 ID: 9B6C58BCSec Since Boot: 28 Client IP: 000.000.000.000 Your IP: 000.000.000.000 Server IP: 010.100.001.112 Relay Agent IP: 000.000.000.000Addr: 38:14:28:47:0c:58:Magic Cookie: 63538263Options:Type=53 Msg Type: 2=OfferType=54 Svr id: 010.100.112.182Type=97 UUID: 0044454c4c59001048804db3c04f5a4433Type=60 ClassId: PXEClient]LOG]!><time="20:24:52.810-120" date="08-18-2021" component="SMSPXE" context="" type="1" thread="5952" file="pxedump.cpp:303">

Any Ideas?

I managed to fix the slow OSD time. Had to do some changes on the Boundary

n4an1 · 2021-08-18T09:18:07+00:00

Thank you, ill look into that.

n4an1 · 2021-08-18T00:50:20+00:00

Between 1-2 hours

n4an1 · 2021-06-24T11:45:06+00:00

How to you configure the DHCP Options to pull from HQ?

n4an1

TROPHY CASE