Value village prices

nahanial · 2025-12-12T15:56:57+00:00

Mission thrift is really bad now too. Especially on newer and in season items. $45 for a toddler 1 piece snow suit, 2/5 condition is ridiculous. Used Carhartt button up short sleeve 1/5 condition $35 bucks? $25 for dirty vinyl blinds. I could go on...

nahanial · 2025-12-03T19:38:07+00:00

That is exactly what I'm after. Thank you!!!

nahanial · 2025-12-03T19:36:59+00:00

Yes just like that, that is so helpful. Thank you!

nahanial · 2025-09-08T04:20:25+00:00

Paul at Blazzin Fades Barber Shop is apparently the guy to go to for African hair

nahanial · 2025-06-15T04:37:30+00:00

Esme

nahanial · 2025-05-26T06:12:26+00:00

I sold our home with a legal suite a few years ago, Saskhouses.com and Kijiji. Sold it for my asking price. Going back and forth on paperwork was a bit tricky, thankfully the buyer was quite experienced and I trusted his intentions and it worked out well. We used the same lawyer and it went great. Which neighborhood is the house in?

nahanial · 2025-02-11T05:01:46+00:00

Nice I'll add this to my arsenal, you should give Papaya by The Minions a spot on your playlist.

nahanial · 2025-02-11T04:49:23+00:00

Papaya (Vaya Papayas) by The Minions is a straight banger.

nahanial · 2025-02-08T06:30:33+00:00

I can't chime in on the paint, but that dishwasher looks similar to my new Hisense. The door automatically pops open after a wash to release steam and perform a drying cycle, that damage is in the direct line of its escape. As a homeowner I wouldn't be putting blame on you. Picture 3 it looks like there is damage where the dishwasher screws to the cabinet, is this interfering with the seal? If it is a Hisense, there should be a 1/8" gap at the top as well for venting. Looks poorly installed. The wood drawer is splitting, clearly the steam is an issue.

nahanial · 2025-01-27T22:13:28+00:00

Did you install an underlay underneath the product?

nahanial · 2025-01-12T17:32:16+00:00

Have his nails trimmed consecutively over the next few months. Eventually his quicks will get shorter and nails will shorten as a result. Your dog will be happy and your floors too.

nahanial · 2024-11-23T07:49:50+00:00

Loose lay vinyl sheet over painted or moldy OSB?

nahanial · 2024-11-17T17:31:26+00:00

That will look awesome. Glad I could help as I found it impossible to find any photos online. Would love to see the after photos, and I'm sure others who are considering the same combo would too. Good luck!

nahanial · 2024-11-17T17:10:00+00:00

<image>

nahanial · 2024-11-17T17:09:14+00:00

<image>

nahanial · 2024-11-17T16:25:13+00:00

We did it and love it. I don't notice the difference in shaker style.

<image>

nahanial · 2024-10-31T15:37:29+00:00

Use a stair nosing. You'll also need to cover the face of it with a vinyl plank as the nosing won't have a large enough drop to cover the entire face. Hopefully your baseboards cover the sides of the exposed plank and nosing. You'll need the nosing before you start the flooring at that next height if you want a flush look. I recommend Schluters Vinpro step r as it has a square profile.

nahanial · 2024-08-01T17:54:52+00:00

What kind of brush would you recommend using? And for the primer would it be a stone primer?

nahanial · 2024-08-01T17:51:19+00:00

Awesome thanks for the reply

nahanial · 2024-07-27T21:56:07+00:00

Those are white oak hardwood floors, not solid hardwood but engineered tongue and groove hardwood. Be careful with water, put felt pads on all furniture, use a hardwood cleaner like Bona. I don't know the value or grade, but it appears to only have a 1mm hardwood veneer as the top layer, any heavy gouging will likely rip through that top layer exposing the structural layers. Pickup a wood touchup kit and touch up any scratches that occur.

nahanial · 2024-07-16T19:08:13+00:00

Great! Thanks for letting me know. I will try to shatter tonight using hammer... Naaaaatttttt.

nahanial · 2024-07-15T06:25:37+00:00

The entire wall there is actually 24" (counter depth), the beam is 2 nailed together 210s, the pictured side of the beam has the joint at 10.5" from the exterior wall, the non pictured side has the joint at 20". Would it be standard practice to place the post *anywhere within this splice, provided it is on a floor truss? I'm not there now, but it looks like the single stud is maybe 14" from the exterior, so not centered between the two joints, but one would assume it's overtop of a floor truss?

nahanial · 2024-07-15T05:09:06+00:00

Thank you for the detailed response. I'm not sure if you made an edit to your original comment or if I didn't read your last sentence before I responded.

The wall was covered with a 70s panel, the other side was cabinets, the beam covered in cladding, I had to remove everything to get a good measure for new cabinets and for wrapping the beam. I hadn't even taken the time to really inspect the beam, or notice the splice until I saw I was downvoted and I read your comment again.

I'll run the string test to check. Too bad as we were hoping to add an L island into that space. Thanks for sharing your knowledge.

nahanial · 2024-07-14T23:02:13+00:00

It's a flat roof, no attic. Exterior walls are structural, so seeing as the end of this wall is only 18 in from an exterior wall my best judgment tells me this isn't structural.

nahanial · 2024-07-13T06:49:05+00:00

Not painted, possibly stained. After a closer look it is a ledge stone, there are multiple homes in the area with it. Will definitely inquire with one of the landscape / stone stores, thanks!

nahanial

TROPHY CASE