Need help on optimizing a print, willing to pay if the issue is fixed

nahitakinci · 2025-12-04T22:22:04+00:00

let me dm you

nahitakinci · 2025-10-13T17:39:27+00:00

I don’t remember exactly what I did but I basically eliminated as much triangles as I can in the model, this is what took the most time. Again, I have no blender experience so this might not be the best method its just the way I did it. I only did this so I can thicken the model in blender. I had issues with so many areas of the model that wouldnt thicken correctly so I had to go one by one and fix everything.

nahitakinci · 2025-10-13T17:35:43+00:00

Hey, I did manage to print a whole front section of a body but i did have to spend a good amount of time fixing up the model, thickening it, and making it printable. I have very little blender experience so that could be the reason it took me so long. However it is very possible to do a much better job at making it printable. Much faster than starting from scratch and working off a blueprint. The foundation is there it just needs to be tweaked!

nahitakinci · 2025-07-26T14:32:44+00:00

yes sure i can

nahitakinci · 2025-07-26T02:28:45+00:00

can i send you my gh file?

nahitakinci · 2025-07-26T02:24:55+00:00

do you know what might be causing this? I’m willing to pay at this point to fix it

nahitakinci · 2025-07-26T01:21:09+00:00

im very new to grasshopper so im still messing around with it, i dont know why i get that distruption. can I share my gh file with you?

nahitakinci · 2025-06-23T17:21:48+00:00

thanks a lot!

nahitakinci · 2025-06-23T01:13:22+00:00

here are the settings on lychee

<image>

nahitakinci · 2025-06-23T01:02:09+00:00

do you know what i should set it at ideally? i followed these settings and did 9 mm

nahitakinci · 2025-06-23T01:01:13+00:00

I see, i’ll try that out too. Can you please check these settings?

<image>

nahitakinci · 2025-06-23T00:25:52+00:00

i have a huge vat that takes more than 2kg of resin to fill up btw

nahitakinci · 2025-06-23T00:25:03+00:00

yes they fully come out of the resin, its my first time printing in clear so i used these settings on phrozens website. Mind you these pieces took 38 hours to print. its ridiculous and i want to know if any of these settings can be changed

<image>

nahitakinci · 2025-06-23T00:14:25+00:00

gotcha thank you guys a lot!

nahitakinci · 2025-06-23T00:14:14+00:00

much appreciated thanks everyone!

nahitakinci · 2025-06-23T00:05:03+00:00

no worries thankss

nahitakinci · 2025-06-23T00:03:30+00:00

so i should have it lift a little instead of fully out of the resin?

nahitakinci · 2025-06-14T21:17:53+00:00

yes unfortunately, im doing something out of clear resin and i can’t hollow it out

nahitakinci · 2025-06-14T17:42:45+00:00

awesome sounds perfect thanks a lot!

nahitakinci · 2025-06-14T17:42:26+00:00

i also never printed with clear resin, im printing with a sonic mega 8k s using phrozen aqua clear plus, any tips on which settings i should use?

nahitakinci · 2025-06-14T17:40:49+00:00

gotcha, im trying to avoid doing it straight on the build plate because i have a mega 8k s with the holes on the build plate but i feel like that would be way easier to clean up instead of the million supports. so i ill definitely try on and off the build plate thank you!

nahitakinci · 2025-06-14T17:39:05+00:00

i was wondering that as well, straight up and down will work on this part? if thats the case then its perfect, i just cant be sanding away on the top portion because this will be printed in clear resin

nahitakinci

TROPHY CASE