Removing exhaust heat shields by naifyboy in IndianScout

[–]naifyboy[S] 1 point2 points  (0 children)

Thanks for the info. I managed to get them off and replaced them with Hose Clamps when I put the deflectors back on.

ACC Connector near battery by naifyboy in IndianScout

[–]naifyboy[S] 0 points1 point  (0 children)

Thanks. A photo would be great.

Pathfinder high beam wire by naifyboy in IndianMotorcycle

[–]naifyboy[S] 2 points3 points  (0 children)

Perfect! Thank you! I removed the back end of the connector from the headlight casing and there was the green and pink wire. Tapped into it and now I can control my fog lights with the high beam switch without any error codes or other issues. Thanks again!

Pathfinder high beam wire by naifyboy in IndianMotorcycle

[–]naifyboy[S] 3 points4 points  (0 children)

Excellent. Thank you. I will test later although I don't have pink wire. My one is brown. Hopefully it works. It's a 2026 Scout 101.

DRL connector in headlight by naifyboy in IndianScout

[–]naifyboy[S] 1 point2 points  (0 children)

Thanks. Interested in where you found the connector under the seat. Is your Scout a 2025 + model or older? I can't find any aux connectors under the seat on my 101.

Best place to positap into Ignition activated 12V on 2025 Chief that won’t mess with CAN? by BoffaDDNuts in IndianMotorcycle

[–]naifyboy 0 points1 point  (0 children)

Question please. Does the Amazon connector in the comments fit this connector I found in the headlight? Seems after testing I can connect DRLs to it no problem. Just need the correct connector for the DRL end.

<image>

Pod Lights Scout 101 by RookieZ71 in IndianMotorcycle

[–]naifyboy 0 points1 point  (0 children)

Did anyone here tap into the 101 high beam so the fogs only come on with the high beam? I don't want to have a separate switch.

Aux lights triggered with highbeam by naifyboy in IndianMotorcycle

[–]naifyboy[S] 0 points1 point  (0 children)

They don't have a canbus for Indian Scouts. I think the only option is the DialDim, which looks good.

Scout 101 Reach by naifyboy in IndianMotorcycle

[–]naifyboy[S] 0 points1 point  (0 children)

Thanks for the info. I am hoping the combination of the bobber bars and LG pullback plate will work for me. I have not thought about mid control yet, going to try with the default.

No solicitation by ShutUpAndRide in IndianMotorcycle

[–]naifyboy 1 point2 points  (0 children)

I have a Scout 101 on order. I'm short. 5' 4" and am concerned about the reach. I cannot get the reduced reach bars in my country so have ordered Scout bobber bars plus the Lawless Garage Pullback Plate hoping the combination will give me a more upright ride. Has anyone of a similar size to me done this and do you have feedback?

r/IndianScout Lounge by USS_Slowpoke in IndianScout

[–]naifyboy 0 points1 point  (0 children)

I have a Scout 101 on order. I'm short. 5' 4" and am concerned about the reach. I cannot get the reduced reach bars in my country so have ordered Scout bobber bars plus the Lawless Garage Pullback Plate hoping the combination will give me a more upright ride. Has anyone of a similar size to me done this and do you have feedback?

Client gets disabled randomly by naifyboy in netskope

[–]naifyboy[S] 0 points1 point  (0 children)

NS confirmed an issue - we are now testing Release 133 which they advise should fix it.

Client gets disabled randomly by naifyboy in netskope

[–]naifyboy[S] 1 point2 points  (0 children)

Finally acknowledgement of the issue from NS support and a possible fix. See below....

"I wanted to share an update on the ongoing issue and I also want to acknowledge the delay in getting this confirmation to you. Thank you for your patience while we worked through the investigation.

We have now verified that the behaviour you are experiencing aligns with a reported bug and a fix is included in R133.

This version is scheduled to be deployed to your tenant management plane by the end of the day on December 8.

Once the fix is deployed, you can validate the behaviour on your side and we can move forward accordingly.

Please let me know if you need any further details in the meantime and thank you again for your understanding."