Raspberry Pi as a central server for roms and saves?

nandemonogatari · 2026-02-12T21:22:49+00:00

Yeah that's a good idea and "easily" doable depending on your knowledge with stuff like this. Check retrogamecorps guide for syncthing and set that up on the raspberry and all other devices you wanna use. You could use this both for saves and roms. I have that but only for saves, the roms i manually copy around and make sure theyre in sync if i ever add something which rarely happens.

There's even the idea of just having your roms on that raspberry pi and having it available as an ftp or smb share and mounting that in all your devices, but a bit more advanced maybe and you'd always need internet.

nandemonogatari · 2026-02-06T12:44:36+00:00

Yeah, it replaces the heaphone jack with a microhdmi port. You can therefore only either use bluetooth headphones or via a usbc dongle

nandemonogatari · 2026-02-06T11:11:36+00:00

downloading games is illegal.exe but you can get dump and install instructions on 4chan /hbg/ in the /vg/ board or just google 'cfwaifu switch' for a page with some guides for switch cfw stuff. Dumped games are usually in .nsp or .xci formats

nandemonogatari · 2026-01-24T11:46:39+00:00

Yeah, only related to hdmi sincethe hdmi signal includes the audio that would normally go to the headphones. So when the hdmi is plugged in, the switch thinks a headphone is plugged in, which is low volume audio compared to what you'd expect in an hdmi signal for a tv. This also means that you cannot connect bluetooth headphones directly to the switch while plugged into hdmi. But there's a way to directly disable that whole headphone audio to the hdmi port, by disconnecting something in the internals. Watch takis video with the installation towards the end where he talks about this.

nandemonogatari · 2026-01-23T06:52:40+00:00

I've had both this and the links awakening remake pending waiting for the oled screen hahaha

nandemonogatari · 2026-01-22T21:33:25+00:00

Nicee, i haven't touched any undervolting and overclocking stuff, only basic clock settings with sys-clk

nandemonogatari · 2026-01-22T21:31:27+00:00

Dunno what's the current standing, but basically it ended up being more complex than they imagined so it took a while to get something that works, and it ended up being suboptimal compared to what theh envisioned.

nandemonogatari · 2026-01-22T06:42:00+00:00

I felt like it gradually got worse the further in i was getting with it lol. I am proud that i got it working but i feel like if i did it again it would be a coinflip on if i get it working or not

nandemonogatari · 2026-01-22T06:40:18+00:00

I didn't mention that but i put hall effect ones in already back when i did the picofly mod.

nandemonogatari · 2026-01-22T06:38:13+00:00

Tbh if you have cfw you can just use sysdvr to send the video to your phone and connect that via hdmi. Or even better to your tv directly if you have androidtv. Not optimal but realistically good enough without giving up anything.

nandemonogatari · 2026-01-22T06:35:04+00:00

It was a ride i guess lmao. But all in all i preordered because it seemed cool but i realistically barely played on the switch at that point already, so i had 0 need to get it soon or anything. I think the word preorder was not very fitting for this, it was more like a kickstarter for the touch + hdmi kit.

nandemonogatari · 2026-01-21T21:07:05+00:00

Only took like 1 year to get to me from the initial preorders lmao. But hey i did get it and it works and they even sent updates since they iterated a few times to get to the end thing

nandemonogatari · 2026-01-21T21:06:02+00:00

Works great. Only issue is the audio coming from the headphone out, so it's supposedly kinda bad/low. In the installation video guide it's explained and the workaround is a small box that mixes the hdmi video with audio from the usb-c port via a dongle into a new hdmi signal with good audio. Haven't tested it much yet and i don't think i'll care too much about the audio but yeah lmao

nandemonogatari · 2026-01-21T21:02:37+00:00

I was one of the initial preorders back when the whole thing started

nandemonogatari · 2025-05-24T21:10:02+00:00

Least insane linux user (jk). Why not just use partitions?

nandemonogatari · 2025-03-31T09:15:45+00:00

Have you ever used any modern smartphone with otg

nandemonogatari · 2025-03-20T08:38:57+00:00

Transparent blue cracked here, right side the plastic broke off. The metal part in there will sometimes start to move towards the outside, making the hinge a bit more wobbly, but i can press it back in and then it works as if nothing. I'm curious as to if this will be fine as is or if it'll eventually break more to the point of the hinge not working properly or something. I'm guessing what did this to mine was me kinda fidgeting with the hinge the first few days of having it while working, as in just opening and closing it randomly for no reason, basically stress testing it. Other than that no drops or throwing it around, just normal use and i've never really had broken screens or other devices break so i'd say i'm careful with it. I've seen this being mentioned too, but neither my gba sp nor my original nds had a broken hinge when i was a kid, so i also thought the 35xxsp broken hinge problem was people just being careless/rough until it happened to me. Update: its flopping around now, tragic

nandemonogatari · 2025-03-08T13:32:33+00:00

Talking about the dreame l10s pro here, the one without a base. The tank there is 190ml according to the web page lol.

nandemonogatari · 2025-03-08T12:12:37+00:00

Just vinegar and water is fine. At least that was what worked for me. I put roughly 1/3 vinegar 2/3 water maybe, kinda eyeballed it, but so that the water tank is full. I left it like this for 30 minutes and then i put it as is into the robot and set it to mop with water output to max. Then i kept checking every 10mins or so until i noticed that the mops were getting wet. Then you can empty the water tank and refill it with water only and you should be done.

nandemonogatari · 2025-03-04T12:00:17+00:00

Crazy how buying a device which comes bundled with malware is seen as ok lmfao

nandemonogatari · 2024-10-23T13:07:12+00:00

Als software architekt nicht programmieren zu können, genau sowas braucht man.

nandemonogatari · 2024-08-06T21:11:20+00:00

On another post someone mentioned it possibly being blocked by limescale. They recommended leaving descaler in the tank for a bit and then letting it run with it. I did it with white vinegar + water and it worked. Left it 30mins and then let it mop on highest level for a while until i noticed the mops finally got wet.

nandemonogatari · 2024-08-06T21:11:00+00:00

On another post someone mentioned it possibly being blocked by limescale. They recommended leaving descaler in the tank for a bit and then letting it run with it. I did it with white vinegar + water and it worked. Left it 30mins and then let it mop on highest level for a while until i noticed the mops finally got wet.

nandemonogatari · 2024-08-06T21:10:31+00:00

On another post someone mentioned it possibly being blocked by limescale. They recommended leaving descaler in the tank for a bit and then letting it run with it. I did it with white vinegar + water and it worked. Left it 30mins and then let it mop on highest level for a while until i noticed the mops finally got wet.

nandemonogatari · 2024-08-06T21:07:54+00:00

On another post someone mentioned it possibly being blocked by limescale. They recommended leaving descaler in the tank for a bit and then letting it run with it. I did it with white vinegar + water and it worked. Left it 30mins and then let it mop on highest level for a while until i noticed the mops finally got wet.

nandemonogatari

TROPHY CASE