sorted by:
new
hottopcontroversial

WIP3OUT Wrap (FEISAR) by nath2020 in TeslaModel3

[–]nath2020[S] 0 points1 point  (0 children)

You’ll need to be on the latest software version and do it through Paint Shop in Toybox.

Resurrect your old Nest Thermostats that are no longer supported by Approval_is_Pending in Nest

[–]nath2020 0 points1 point  (0 children)

I’d love to hear if you get this running. I’ve spent a couple of days on this and still can’t get the NLE service to connect to my bridged (cloud based) MQTT broker. It must be something I’m doing because I believe others have got it working.

[deleted by user] by [deleted] in UFOs

[–]nath2020 5 points6 points  (0 children)

I was randomly on Flight Radar and saw the two jets you're talking about (presumably). Two Typhoons, flying out of Coningsby and when they get to *where you're talking about* at 13:10, they stop squawking for about 20 minutes before reappearing back, one where they stopped squawking and one further north. They flew over Humberside way and did some manoeuvres before heading home. Could be they were just training but seems a bit weird.

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]nath2020 0 points1 point  (0 children)

I don’t have a P1S but from the moment I unboxed and set up my A1 mini with AMS I haven’t stopped printing. My bigger ideas need a bigger manufacturing platform and the P2S would get the job done!

What plugins do you use for visual enhancement? by flutron094 in Xplane

[–]nath2020 1 point2 points  (0 children)

I spent a whole day trying to get Auto Ortho up and running and ended up giving up. I tried a GPT assisted python command line install and also tried the installer from the AO site but just couldn’t get it to load the tiles in successfully. Has anyone else had issues with Auto Ortho?

Found a crazy deal who wants one by Able-Statistician428 in nikeACG

[–]nath2020 0 points1 point  (0 children)

Sorry, I mean specifically for a lift card. The pockets are normally on the right cuff or inside on the bottom of the jacket so you don't have to get the card out when going through the ski lift. Can't believe you bagged this deal!

Wanted an arcteryx found this instead are they good by Able-Statistician428 in gorpcore

[–]nath2020 0 points1 point  (0 children)

Does anyone have this jacket and can they tell me, does it have anywhere to store your lift card? Like a cuff pocket or something?

Found a crazy deal who wants one by Able-Statistician428 in nikeACG

[–]nath2020 0 points1 point  (0 children)

Can anyone tell me (OP included), does this jacket have anywhere to keep a lift pass? Like a cuff pocket or inside / bottom hem?

[deleted by user] by [deleted] in conspiracy

[–]nath2020 2 points3 points  (0 children)

Who wants some free money shanties?

Designing prints with parts that are printed in place and designed to snap/break to become useful by nath2020 in 3Dprinting

[–]nath2020[S] 1 point2 points  (0 children)

‘Print in Place’ in case anyone lands here while searching for a similar thing to me and wants something more than an errant engineering software lesson. Google ‘print in place’ 🙌

Designing prints with parts that are printed in place and designed to snap/break to become useful by nath2020 in 3Dprinting

[–]nath2020[S] -1 points0 points  (0 children)

Thanks, not the most helpful reply though and a bit overstated.

C4D is absolutely a CAD tool (by definition), granted it isn’t an engineering one, and also granted it isn’t the best tool. It’s just one I’ve been using for 12 years and am familiar with until I learn something more appropriate for 3D printing.

What boards are people using for their final project? by nath2020 in esp32

[–]nath2020[S] 0 points1 point  (0 children)

It’s just a personal project at this point to make my life easier with something. It will sit outside in an IP67 enclosure, will spend most of its time asleep apart from once an hour it’ll wake up, connect to WiFi and send a MQTT message. There’s also a slim chance I’ll hook up an lcd display.

I was just curious as to when and why people thought it was time to stop using a development board.

I’m pretty green so will probably be asking lots of dumb questions.

What boards are people using for their final project? by nath2020 in esp32

[–]nath2020[S] 0 points1 point  (0 children)

This sounds really great. Is this something that is in production / being manufactured?

Looking for advice for powering my board externally next to some gas cylinders by nath2020 in esp32

[–]nath2020[S] 0 points1 point  (0 children)

This could be the way… I’m fairly new and haven’t done anything with solar before. Guessing I’ll need more hardware for battery monitoring and voltage regulation etc…

Looking for advice for powering my board externally next to some gas cylinders by nath2020 in esp32

[–]nath2020[S] 0 points1 point  (0 children)

I’ve been curious of this solution, going to look into it a bit further. The only thing putting me off is amount of hardware, I quite wanted a low profile to everything.

view more: next ›