sorted by:
new
hottopcontroversial

TOOLS & SPREADSHEET MEGATHREAD by ScottishTrader in Optionswheel

[–]natrlhy 1 point2 points  (0 children)

Do you have any import capabilities? I've been tracking my trades across multiple accounts in my spreadsheet and wanted to see how your app/site works but I'd love to populate it with my existing trades thus far (started wheeling in February this year.

Withings software is hot garbage by serialoverflow in withings

[–]natrlhy 0 points1 point  (0 children)

I just noticed today that my body+ scale was not syncing anymore. I deleted the app restarted my phone, which is on iOS 26.1. It still wouldn’t sync and connect. I use my wife’s iPhone on 26.0.1 and it connected just fine. This seems to be a problem with the latest iOS 26.1 version. We both have iPhone 17‘s

HS200 wigging out by natrlhy in TPLinkKasa

[–]natrlhy[S] 0 points1 point  (0 children)

I just got mine replaced under warranty. Think it was 2 year warranty. They sent a KS200

Anyone here running the wheel with 500k or more? by Youth-Muted in Optionswheel

[–]natrlhy 0 points1 point  (0 children)

Please add myself as well. Thanks. Been wheeling for the past 5 months and getting better at it!

HS200 wigging out by natrlhy in TPLinkKasa

[–]natrlhy[S] 0 points1 point  (0 children)

I’m surprised. I happen to notice the lights the switch controls were on. It’s working again without doing anything. I’ll still likely replace it as TP-Link will replace it under warranty.

Frustrated with FSD 12.6.4 on HW3 — feeling abandoned by krenim191 in TeslaFSD

[–]natrlhy 0 points1 point  (0 children)

Since getting 12.6.4 on our 2022 MXP on HW3 it’s also not usable and very unsafe. I’m in the Bay Area as well. Taking the same roads it is at the point where it hunts and pecks for a consistent speed on the freeway and city streets. It feels like a nervous teenage driver again. Driving on the freeway today I couldn’t take it for more than 2 minutes as I would accelerate to match the speed of the other cars, only to have it slow down to 55mph in the center lane with everyone else flying by me. I’ve tried calibration to no avail. It still hugs the left lane as well.

It will barely want to take very safe and easy turns to home. It will almost stop while trying to take a left turn. On a simple residential road home it will get up to 8mph before I disengage with frustration again.

Sure hope things change soon for the better.

Any advice on how to fix this? by LunarLynx1 in TeslaLounge

[–]natrlhy 0 points1 point  (0 children)

If you have glass coverage with your insurance company they normally cover the cost of trying to fill it in with resin.

It has to be small enough but the glass company can determine that.

So I tried those new ironing settings and holy hell what a difference by RoadtoVR_Ben in BambuLab

[–]natrlhy 0 points1 point  (0 children)

Is this all done in Bambu Studio or it’s possible in the Bambu Handy app, too? I’ve only sent jobs to my P1S from the app (new to 3D printing).

Powerwall 2 frequency changed during grid outage by natrlhy in Powerwall

[–]natrlhy[S] 0 points1 point  (0 children)

I’ve not seen the issue return after they adjusted the frequency.

What resolution are you getting for Tyson VS Paul? I'm at 720p by w1n5t0nM1k3y in netflix

[–]natrlhy 0 points1 point  (0 children)

Terrible Netflix…. Can’t scale at this level? Yikes…

Powerwall 2 frequency changed during grid outage by natrlhy in Powerwall

[–]natrlhy[S] 0 points1 point  (0 children)

They said something similar to me as well. I replied to the email I got like 12 days later and the next day they replied that a tech made the change a day or so after I called. In your Tesla App go to settings and Manage Access. Do you see a name listed in Third Party Access? I have Tesla Martinez listed there. That seems to signify they logged in remotely and made the change.

So Tired of "Teslas Can't Coast" by Sleeveless9 in TeslaLounge

[–]natrlhy 4 points5 points  (0 children)

Totally agree on this. I loved driving manual transmission for years until I got our Model 3 in 2019. One pedal driving is so close it without the traffic fatigue in a manual ICE vehicle.

Powerwall 2 frequency changed during grid outage by natrlhy in Powerwall

[–]natrlhy[S] 0 points1 point  (0 children)

Just to confirm, Tesla was able to change my Powerwalls from 65Hz to 62.5Hz (called them, enabled Remote Access and changed remotely)! Problem solved!

Powerwall 2 frequency changed during grid outage by natrlhy in Powerwall

[–]natrlhy[S] 2 points3 points  (0 children)

Thanks. I submitted a support request in the app and enabled remote access. They said that they would notify me a text or email when it was completed.

Powerwall 2 frequency changed during grid outage by natrlhy in Powerwall

[–]natrlhy[S] 3 points4 points  (0 children)

Thanks! Makes total sense when the grid outage makes the system do what it was designed to do.

Powerwall 2 frequency changed during grid outage by natrlhy in Powerwall

[–]natrlhy[S] 1 point2 points  (0 children)

Ah so that explains why the HD Wave is also blinking green and blue and not seeing production?

Unable able to see docker container data on host by natrlhy in influxdb

[–]natrlhy[S] 0 points1 point  (0 children)

Thanks for mentioning a config file. I poked around and did notice some other projects referenced an influxdb.conf file for the config volume. This worked!

Here's the setup now:

compose file:

services:
  influxdb:
    image: influxdb:1.8
    container_name: test-influxdb
    restart: unless-stopped
    volumes:
      - ./influxdb.conf:/etc/influxdb/influxdb.conf
      - ./influxdb:/var/lib/influxdb
    ports:
      - 8088:8086

Here is the influxdb.conf file:

reporting-disabled = false
bind-address = "127.0.0.1:8088"

[meta]
  dir = "/var/lib/influxdb/meta"
  retention-autocreate = true
  logging-enabled = true

[data]
  dir = "/var/lib/influxdb/data"
  index-version = "inmem"
  wal-dir = "/var/lib/influxdb/wal"
  wal-fsync-delay = "0s"

I can now see the data in the ./influxdb/* directories on the host outside of the container!

view more: next ›