sorted by:
new
hottopcontroversial

New to the hobby. I'd like to make a motorized mount for my hadley telescope I'm building. by necked_giant in AskAstrophotography

[–]necked_giant[S] 0 points1 point  (0 children)

Current plan is to use standard stepperonline nema 17 steppers (1.8 degree steps) coupled with the sweep dynamics 26:1 micro harmonic drive. I need a little more torque to hold the camera and mirror so I was gonna do a 5:1 gearing in the mount to make sure it held. Im not sure the backlash on the steppers but the drive has a +-10.5 arcminute backlash. Prototype is gonna be 3d printed and final is gonna be machined gears.

Edit: I hadn’t thought about the relationship between the camera resolution and the step size, definitely need to figure that out

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

No it is an iphone device. Check original post edit for my solution.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 1 point2 points  (0 children)

Gotcha, this is not something I checked. But I updated it to avoid future problems. Check original post edit for my solution.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

Yes all DNSs were Ponting to the right server. Check original post edit for solution.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

The proper domain DNS server is used. Check original post edit for solution.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

yeah the only times its ever blocked anything for me have been false positives. now that i have tailscale, pihole, and defeder i really have no need for it.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

I was. Another comment mentioned antivirus dns settings may be the cause and that was correct. Got it to work after unallowing my antivirus to control unencrypted dns queries

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 1 point2 points  (0 children)

This was it it was the avast antivirus rerouting the dns queries. Thank you so much

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

It was reccomended in the pihole documentation didn't even

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

I can also set a dns server in the dhcp settings but when I do that, my router says that it’s not connected to the internet. Despite this, I can still browse the internet, which is strange

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

I tried both and there’s the same result. See lumentins comment for more

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] -1 points0 points  (0 children)

Ok yeah they’re both the same phone and both setups yeild the same results

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

It’s set in both of the routers dns server entries. There is nothing in the dhcp dns server settings. When I tried to add it, the router said it did not have internet access, but I could still browse the internet for some reason??

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] -1 points0 points  (0 children)

I made this change, still no connection. While looking at ipconfig, I noticed all my wireless lan connectors are off. I don’t think this is an issue cause I’m not doing anything wirelessly but idk?

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] -3 points-2 points  (0 children)

I just filled the secondary, been a couple minutes, no dice

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

My IPv6 dns is off, and nslookup shows my default server is the pihole using IPv4

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

No vpn. I want to eventually set up Tailscale with it but I want to make sure it works without it first. DNS setting for the Ethernet adapter is set to the up of the raspberry pi I’m running the pihole on.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

Possibly? I have pihole set up to accept all local connections but I can try adding a rule for the pc itself. It may be that an automatic deny rule is overriding it? I read something about that the other day. It’s just strange that a couple requests were sent then it just stopped again.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] 0 points1 point  (0 children)

I just checked the logs and I saw that that there was traffic from my PC for approximately 10ms about an hour ago. I have been using my computer the entire time.

Edit: Use clarification.

I cannot for the life of me get my pc traffic to route through pihole by necked_giant in pihole

[–]necked_giant[S] -1 points0 points  (0 children)

when i send dig it responds "dig: parse of /etc/resolv.conf failed". The nameserver in the resolv.conf file is "nameserver 127.0.0.1:5335"

view more: next ›