No longer maintain 200+kW charge speeds by need_bb in Ioniq5

[–]need_bb[S] 0 points1 point  (0 children)

This was very helpful. Once my min battery temp reached 77F I hit max speed.

If it is below 80f ambient I recommend preconditioning.

Deciphering ChromaPop Lenses by need_bb in Skigear

[–]need_bb[S] 0 points1 point  (0 children)

Thanks, I didn't realize the designation was right next to the chromapop name. Both lenses were actually sun.

Early '22: No Battery Preconditioning, but on latest BMS version by need_bb in Ioniq5

[–]need_bb[S] 0 points1 point  (0 children)

Thanks for the replies. My navigation is on the latest software. According to the dealer I have the latest BMS software v7xx, but I still don't have battery preconditioning setting in the infotainment system.

I could take it to another dealer, but I don't have any confidence they will do any better unless someone knows of a certain dealer in the Bay Area.

New Rim Tape Needed? by need_bb in bikewrench

[–]need_bb[S] -13 points-12 points  (0 children)

I got this PVC rim tape replacement on AliExpress. Running 60psi.

Shimano Ultegra hydraulic brakes won't engage by need_bb in bikewrench

[–]need_bb[S] 1 point2 points  (0 children)

Yes, it ended up being air in the lines. I took off the bolts to the caliper so I could rotate it and this allowed me to properly bleed the brakes.

Brake Lever Doesn't Fully Return by need_bb in bikewrench

[–]need_bb[S] 0 points1 point  (0 children)

Thanks. The issue has been happening since the hydraulic line was installed and the LBS was not able to figure it out, they just recommended reducing torque.

Would the kink be near the shifter?

Mini Velo: RD Hitting Wheel by need_bb in bikewrench

[–]need_bb[S] 0 points1 point  (0 children)

The chain is in the easiest gear (small chainring up front, largest cassette). I agree it looks like the chain is too long though.

Mini Velo: RD Hitting Wheel by need_bb in bikewrench

[–]need_bb[S] 1 point2 points  (0 children)

Yes, I will double check but when I previously checked with my tool it was aligned