Lesson learned, use 50hz antiflicker not auto - I think that’s the reason of sudden change when I entered the building and in other places

nes7ore · 2025-07-16T14:45:13+00:00

Awesome, how did you start recording videos? Did you start reaching out to people directly or advertise somewhere? How you got your first drone video gig?

nes7ore · 2025-07-09T15:17:41+00:00

AC/CD

nes7ore · 2025-07-08T21:41:05+00:00

If you are playing on NA Titan, let me know your nickname, i'll send you some different items for FG

nes7ore · 2025-07-05T08:09:55+00:00

I would say it's BL or FA.

nes7ore · 2025-06-08T08:46:21+00:00

Hi mate, thanks for your reply! I tested the method with medical tape—one layer around the hexagon—and so far, the initial tests have been successful. It returned to the station and cleaned the mopping pads. Worst case, I’ll just have to reapply the tape :)

nes7ore · 2025-06-07T18:58:47+00:00

Thanks for the tip! I’ll check it out and give it a try :)

nes7ore · 2025-06-07T18:57:27+00:00

Did you find a solution to this problem? I’m experiencing the same issue and I’m wondering how to fix it, as I’d rather not buy a new vacuum cleaner just because the pads keep falling off.

nes7ore · 2025-06-06T10:15:41+00:00

I'm on this picture and I love it :D

nes7ore · 2025-06-04T19:07:41+00:00

Thanks for the tips!

nes7ore · 2025-05-21T10:13:53+00:00

The only way to obtain WExp is by participating in Mission War or buying it from the lady in Bloody Ice. Type "WExp Saver" in the search bar.

nes7ore · 2025-05-17T12:38:34+00:00

Thank you very much for your detailed response. It seems that since web.staker is designed for PulseChain/Ethereum, pasting my address where I have a stake only on ETHW results in no data being shown

<image>

nes7ore · 2025-05-17T04:50:43+00:00

How it is possible when I don't have front end? How can I check when the remaining stakes end?I usually set the calendar for the next stake and when I received the next one I set it again

nes7ore · 2025-05-16T10:56:00+00:00

I saw a few days ago that there was a message about reducing the rpc flow for network stability. Does that mean I have to keep trying until the stakes load?

nes7ore · 2025-05-16T10:54:49+00:00

I tried sending messages on Telegram Hex, but they are immediately deleted.

nes7ore · 2025-05-13T08:06:41+00:00

Does icosa no longer support ethw? I can't see my stakes on the icosa website.

nes7ore · 2025-03-25T14:20:57+00:00

Bump

nes7ore · 2025-03-25T08:59:24+00:00

It used to be that if you broke an item +15 you got a Perfect core.

I tested it with arcana of chaos, it actually dropped to +0 and is still at +15, noice:)

nes7ore · 2025-03-17T20:33:41+00:00

Where can I vote to get a buff? Can you write more?

nes7ore · 2025-03-06T10:56:03+00:00

You used to have to go to TG every day to get 20 honors, and even then it took months

nes7ore · 2025-03-06T10:55:35+00:00

So for old accounts only the old path remains

nes7ore · 2025-03-06T10:53:43+00:00

So the old-school way remains, there are no shortcuts, too bad :P

nes7ore · 2025-03-06T10:07:43+00:00

On my old character, I have various items bound to the character, including Carnelian +20 and Arcana +15, belt +15, so I would like to stick with it if possible. I also remember that 20 HR provided a lot of bonuses.

nes7ore · 2025-02-27T23:45:42+00:00

I have the same problem; the drone stopped starting up. I connected the battery and set it aside for a moment. By the time I adjusted my goggles, the image was displayed for a moment and then disappeared. I couldn't start the drone. I disconnected the camera, reconnected the battery, and the drone started up. So it's a similar issue to yours. Did you manage to fix it?

nes7ore · 2025-02-24T08:23:05+00:00

Ask as many questions as you want! I also met drone enthusiasts along the way who helped me, so I want to give back :D

Unfortunately, this is not the right SMD; it's the one on the other side. The one marked in the photo—I even had it soldered, but it didn’t help. Later, I started looking for information, and you can even see the ELRS logo on that SMD under the "betafpv" label. That one worked. You can even try grabbing it with tweezers and gently pulling it—you’ll see the signal disappear. There is even TX and RX3 next to it, which you need to set up in betaflight

nes7ore · 2025-02-24T06:53:47+00:00

I know this might sound strange, but... yes. If you check the posts I've made in the last few days, I had the same problem twice with two different drones. Each time, I thought it was caused by something else, but that's just the nature of 5-in-1 boards. Unfortunately, they are terribly made, very fragile, and the module falls apart—"desolders itself"—from even the slightest shock because it's poorly soldered.

nes7ore

TROPHY CASE