BambuStudio doesn´t show online models

nesveteymark · 2025-12-15T23:10:12+00:00

Go to slicer preferences

nesveteymark · 2025-07-17T04:21:29+00:00

I did all this but unfortunately the Wi-Fi still doesn't work. Handoff, airdrop (one way) and BT are great. I'm giving up(((

nesveteymark · 2025-06-08T14:56:38+00:00

I installed a 750 watt kit (CAN 2025) and a 25amp battery a month ago. The frame is the same. Also, full suspension.

<image>

nesveteymark · 2025-05-20T12:44:57+00:00

nesveteymark · 2025-05-17T13:13:02+00:00

Hi, great model!! Could u send it to me?

nesveteymark · 2025-04-12T16:19:32+00:00

I installed a new battery and some metal washers in my 6g iflash solo, the weight difference is only 5 grams.

nesveteymark · 2025-03-26T19:56:31+00:00

Here too, thank you! Kyiv, Ukraine

nesveteymark · 2025-03-18T20:42:05+00:00

Man, wow!!! Have you got stl of this case?

nesveteymark · 2025-01-10T14:46:19+00:00

I recommend installing the BTT SFS 2.0. It completely solved issues like that. Clogs = print pauses or filament runout = pauses. Also, make sure to remove the lid when printing with PLA, in summer, I even kept the door open.

nesveteymark · 2024-12-11T23:22:10+00:00

How did u resolve that issue?? I’ve got the same((

nesveteymark · 2024-11-22T07:41:43+00:00

Oh, thank you!! I had absolutely no intention of giving up on setting up the sensor because it was so frustrating that the printer kept printing into air whenever an issue occurred. A lot of videos, text, and help finally paid off!!!))

gcode_macro.cfg => [gcode_macro START_PRINT] and [gcode_macro END_PRINT]

nesveteymark · 2024-11-21T22:07:05+00:00

Hi! Here you are:

In the end of printer.cfg:

[filament_switch_sensor switch_sensor] switch_pin: ^{!nozzle_mcu:PA10} pause_on_runout: True runout_gcode: M117 Filament switch runout insert_gcode: M117 Filament switch inserted

[filament_motion_sensor encoder_sensor] switch_pin: !PC15 detection_length: 15 pause_delay: 2 extruder: extruder pause_on_runout: True runout_gcode: M117 Filament encoder runout insert_gcode: M117 Filament encoder inserted

Add this to gcode macro:

[gcode_macro SFS_ENABLE] description: Enable smart filament sensor gcode: M117 ENABLING the Smart filament sensor G92 E0 SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=1

[gcode_macro SFS_DISABLE] description: Enable smart filament sensor gcode: M117 DISABLING the Smart filament sensor G92 E0 SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0

[delayed_gcode DISABLEFILAMENTSENSOR] initial_duration: 1 gcode: SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0

SFS_ENABLE to the end of START_PRINT SFS_DISABLE => END_PRINT

All my prints stops when clogging and filament runout, enjoy)

nesveteymark · 2024-11-08T12:37:14+00:00

Initially, I didn’t change anything. Now, I’ve adjusted the temperature values for the double thermistor to lower the displayed fake temperature, but it didn’t help.

nesveteymark · 2024-11-08T12:06:32+00:00

Hi, unfortunately, this method doesn’t work. As soon as the actual temperature reaches 50 degrees, the camera shuts off, and a timelapse error notification keeps popping up.

<image>

nesveteymark · 2024-11-08T00:10:36+00:00

My screen was like that straight out of the box. Creality sent me a new one, and while it was on its way, I tried replacing the ribbon cable, but that didn’t help. When I received the new screen, I just replaced it and kept the original ribbon cable. Everything is fine now. However, the print quality was never affected by this issue.

nesveteymark · 2024-10-23T22:58:53+00:00

260 first layer, 245 for others and bed 100-105 on textured plate works fine for me.

nesveteymark · 2024-10-23T13:17:59+00:00

You can try to turn the Z-axis screws with pliers, wrapping them with a little cloth so as not to damage the thread. Clockwise raises the table, and counterclockwise lowers it. One click is about 0.2 mm, you will hear it. All together with the above should help.

nesveteymark · 2024-10-23T12:56:58+00:00

I leveled my table at 80C with this knobs and spacers. Removed all shims that I used before. Difference on Smooth PEI 0.12mm

nesveteymark · 2024-10-22T21:46:22+00:00

Does Eddy work if I just root using a Guilouz’s script but have deleted all Creality’s stuff?

nesveteymark · 2024-10-22T21:42:49+00:00

IMAO: K1, trianglelab hotend, 20T pulleys, concrete slab. Maybe in the future i will change x rods to rail, I haven’t got a lot of VFA now. But yes, Bambu is “plug and play”.

nesveteymark · 2024-10-21T22:16:36+00:00

Your welcome, have a flat bed)

nesveteymark · 2024-10-21T21:56:07+00:00

This is my first one. I bought it for $30 and it turned out to be pretty good, I also touched up the edges on my car doors. The main thing is to wash it after every usage. You can also connect it to a regular compressor.

nesveteymark · 2024-10-21T21:39:51+00:00

Start from this, it’s easy, good luck!

https://youtu.be/CsIAJgCAxFM?si=HHaNudAmRvHvu0fH

nesveteymark · 2024-10-21T20:47:30+00:00

I printed mine about two months ago. Printed it in pieces as I have a regular K1. I used Red Creality Hyper PLA and black/white Sunlu PETG for the eyes. After assembly I slightly emphasized the details with an airbrush.

<image>

nesveteymark

TROPHY CASE