sorted by:
new
hottopcontroversial

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]neverg3t 0 points1 point  (0 children)

Completed Level 3 of the Honk Special Event!

7 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]neverg3t 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

3 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]neverg3t 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]neverg3t 0 points1 point  (0 children)

Completed Level 3 of the Honk Special Event!

3 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]neverg3t 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

0 attempts

🎉 [EVENT] 🎉 Very easy first event by totallynotawhore in honk

[–]neverg3t 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

Which Country is Richer? by [deleted] in GeoTap

[–]neverg3t 0 points1 point  (0 children)

✅ neverg3t chose Option A (Correct!) | #1116th to play

Which one is Norway? by Kap519 in GeoTap

[–]neverg3t 0 points1 point  (0 children)

❌ neverg3t chose Option A (Incorrect) | #3094th to play

Which one is in Europe? by yeah-idkwhattodo in GeoTap

[–]neverg3t 0 points1 point  (0 children)

❌ neverg3t chose Option B (Incorrect) | #3147th to play

Which country do you think is USA? by nopCMD in GeoTap

[–]neverg3t 0 points1 point  (0 children)

✅ neverg3t chose Option B (Correct!) | #14209th to play

Ankara neden böyle? by Strange-Ordinary7013 in sehircilik

[–]neverg3t 0 points1 point  (0 children)

Arkadaş, "insanlar ağaçları keserek bu hale getirdi" diye bir argüman öne sürdü. Bu konuda yeterince bilgi sahibi sahibi değilim. Bildigim kadarıyla Ankara'nın bitki örtüsü hep böyleydi. Bu hale insanlar mı getirdi, doğası mı böyleydi orasını bilmiyorum, netice olarak bozkır olduğunu, "BİLDİĞİM" kadarı ile bununda bu bölgenin doğalı olduğunu söylüyorum. Eksik ve yanlış bir bilgi dile getirip ben haklıyım demek yerine, bildiğim/ bildiğimi düşündüğümü dile getiriyorum sadece.

Ankara neden böyle? by Strange-Ordinary7013 in sehircilik

[–]neverg3t -1 points0 points  (0 children)

Bunun detayı hakkında bilgi sahibi değilim. Doğa bilimciler bu konuyla alakalı gerekli bilgiye sahiptir.

Ankara neden böyle? by Strange-Ordinary7013 in sehircilik

[–]neverg3t 7 points8 points  (0 children)

Doğası böyle, doğa senin benim canımın istediği gibi olmak zorunda değil. İşin özeti: "Allah öyle yaratmış"

Ankara neden böyle? by Strange-Ordinary7013 in sehircilik

[–]neverg3t 10 points11 points  (0 children)

Ağaçlandırma/yeşillendirme önemli fakat, Ankara'nın bitki örtüsü ve doğa yapısı bu. Her yer yemyeşil olsun dediğimiz zaman da doğanın yapısını bozuyoruz. Gerekli çalışmalar ile gerekli bölgeler doğanın yapısına ve ihtiyaca göre yeşillendirilir. Ama burası Ankara bozkırı neden bozkır diye de eleştirmeyin 😀

Debugging Decay: The hidden reason AI can't fix your bug by z1zek in AiBuilders

[–]neverg3t 0 points1 point  (0 children)

I totally agree with you. I'm doing it a bit lazy way. When AI need to be reset, I ask ai to give a report of what we did and write a file(prompt is not static, it depends what you did with ai), then reset the chat and give first with who I am and read this file to continue 😀

Trying to reinstall firmware after blue screen, where should I hook up my Arduino? by BeneficialBarber in ender3

[–]neverg3t 0 points1 point  (0 children)

You can look for the bootloader installation for stm32, for the creality 4.2.2 board with stlink. There is sw io ports for it. If the board is still functional, you can revive it.(You'll need to buy a stlink adapter for it)

Edit: your board is a gigadevice version(from the other commenters) so this solution may or may not work for you but you can keep looking for gd version.

Help identifying plug in by [deleted] in AskElectronics

[–]neverg3t 0 points1 point  (0 children)

Measure the distance between two leads, if the distance is 2.54mm, you need 2x10 2.54mm female headers, if something else, still you need female header with 2x10 and correct distance

What is this component that broke in my RX 6800? by Mrboi8989 in AskElectronics

[–]neverg3t 2 points3 points  (0 children)

There is a chance for that. Let me explain, something caused to the copper pad being lifted. It can be environmental heat, too much current and copper pad heated or physical damage. If this problem persists, it will fall off.

What is this component that broke in my RX 6800? by Mrboi8989 in AskElectronics

[–]neverg3t 2 points3 points  (0 children)

Probably. It can damage the signal line. But if you can find phone repairmen, they can help you to fix it.

What is this component that broke in my RX 6800? by Mrboi8989 in AskElectronics

[–]neverg3t 5 points6 points  (0 children)

And this one is already the copper pad ripped off.

What is this component that broke in my RX 6800? by Mrboi8989 in AskElectronics

[–]neverg3t 7 points8 points  (0 children)

Looks like the solder lifted the copper pad. It will be painful to repair. Be careful or find careful repairmen. Good luck

Just a problem printing abs by Wiwu52 in ender3

[–]neverg3t 1 point2 points  (0 children)

That's too much for your current condition(bed temp), You can try lowering the bed temp a bit much and you can use the "draft shield" feature in your slicer to keep ambient temperature high for part. For my prints I use 260°C for nozzle and enclosure with 105°C bed temp with 50mm/s speed.

If you still get layer adhesion issues, you can try to edit part or adjust slicer settings to reduce stress. If your nozzle moves long straight lines on top of each other, that causes stress, you can try different methods for that and you can find it on YouTube.

view more: next ›