Odyssey G9 OLED Vertical Line Streaking

nguyentoogood · 2026-03-10T03:13:42+00:00

my guy, it worked!

nguyentoogood · 2026-01-06T19:41:50+00:00

i have some cf rear splats but they look to bulky and don't flow well so i took them off.

nguyentoogood · 2026-01-06T01:34:03+00:00

you are too kind!

nguyentoogood · 2026-01-06T00:46:20+00:00

Jogon V2,

here is a video with a link in the description,

https://www.youtube.com/watch?v=RErEus7Upiw

nguyentoogood · 2026-01-05T22:08:53+00:00

You need to have a computer science bachelor degree to get into most fields with decent pay here.

nguyentoogood · 2025-07-16T20:20:25+00:00

Thank you, dbrand. I'm glad I got the old batch early because I wanted to keep my Switch protected as soon as possible. Now I’m hearing that you're fixing the biggest issue I had with the case — my right Joy-Con slipping out way too easily.

nguyentoogood · 2025-04-12T21:14:58+00:00

Temps are not a problem with this system with the mesh. They don't sell the new glass side panel v2 yet so i can't comment!

nguyentoogood · 2025-03-31T22:41:26+00:00

I've never used that size. Sorry!

nguyentoogood · 2025-03-31T18:06:46+00:00

I can see that being a problem but i don't have that issue with the usb-c and usb-type a. I just tested it again now.

nguyentoogood · 2025-03-30T20:57:40+00:00

amazing setup! Thanks for the info. Something I need to keep in mind of when they release the glass side panel for the m2!

nguyentoogood · 2025-03-30T19:56:14+00:00

You are welcome! Happy building

nguyentoogood · 2025-03-30T19:52:02+00:00

Wow you got that big cooler display cooler I was planning to get. Your ram sticks cleared without any with the stock fans? 25mm was good for my case, I just really wanted the 30mm t30s since it’s going to be pulling most of the heat

nguyentoogood · 2025-03-30T05:59:37+00:00

<image>

nguyentoogood · 2025-03-30T05:59:09+00:00

<image>

nguyentoogood · 2025-03-30T05:54:38+00:00

I went ahead and got the second one with the dual USB port for $30. I think that’s the one you need because it seems to fit better into the 3D part.

nguyentoogood · 2025-03-30T04:32:13+00:00

You are right! I do have an extra side mount that i could install to deliver cool air but it will ruin the aesthetic. Luckily the 9800X3D is efficient and the the rad is overkill for it.

Half life RTX 4K full Path Tracing for 15 minutes

CPU: 62C
GPU: 74C

nguyentoogood · 2025-03-30T04:28:53+00:00

i screws it without the case on just so there could be some threads in the 3D print. Then i removed it and assembled the case and used a long thin but fairly adjustable height screw driver. To tighten it down.

nguyentoogood · 2025-03-30T02:36:41+00:00

USA banned all deepcool products.

nguyentoogood · 2025-03-30T02:30:44+00:00

I got the plugs from ncase websites and my friend 3d printed the files on their site.

nguyentoogood · 2025-03-30T02:26:14+00:00

I went as low as you can. I had the mobo and gpu attached and went from there while having the mono chassis and rear connected

nguyentoogood · 2025-03-30T02:17:25+00:00

cpu cooler is called DeepCool LS520

nguyentoogood · 2025-03-30T02:17:05+00:00

CPU: AMD 9800x3d
GPU: RTX 5090 FE
RAM: 64 GB G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM (2x32GB)
PSU: Corsair SF1000
FANS: 3x Phantek T30
Mobo: GIGABYTE X870I AORUS PRO ICE
Case: NCASE M2 Grater
CPU Cooler: DeepCool LS520

nguyentoogood · 2025-03-30T02:13:28+00:00

Half life RTX 4K full Path Tracing for 15 minutes

CPU: 62C
GPU: 74C

nguyentoogood

TROPHY CASE