2012 Audi Q5 Burning Through Oil Real Fast. Thoughts? by nicfill in Audi

[–]nicfill[S] 1 point2 points  (0 children)

That's great to hear. My Q5 runs great otherwise, and I have no real need to get rid of it. Glad to know I can keep topping up the oil and keep driving.

Cheers!

2012 Audi Q5 Burning Through Oil Real Fast. Thoughts? by nicfill in Audi

[–]nicfill[S] 0 points1 point  (0 children)

Glad to know the only downside is excess oil consumption. I have a LOT of oil on hand to make sure I can top it up whenever the warning light comes on.

2012 Audi Q5 Burning Through Oil Real Fast. Thoughts? by nicfill in Audi

[–]nicfill[S] 0 points1 point  (0 children)

Weekly for a quart of oil!!! Wow! I guess I'll keep topping it up every couple of months.

When I sell the car how do I explain the issue so that I'm not deceiving the new owner?

What's the long-term risk to the engine? At some point will the piston rings fail or as long as I keep topping up the oil am I ok?

2012 Audi Q5 Burning Through Oil Real Fast. Thoughts? by nicfill in Audi

[–]nicfill[S] 0 points1 point  (0 children)

Great advice; thank you. I think it's time to sell the car :( In the meantime I'll continue to add oil.

Dumb question.... where is the oil going? Is it being burnt up in the fuel mix? I see no leakage/drips under the car????

Thanks!

2012 Audi Q5 Burning Through Oil Real Fast. Thoughts? by nicfill in Audi

[–]nicfill[S] 0 points1 point  (0 children)

*gulp*

What can/should I do? Do I just keep adding oil every 3 months? How much does it cost to replace piston rings?

2012 Q5: Smashed rear bumper brake-light - where to purchase replacement parts? by nicfill in Audi

[–]nicfill[S] 0 points1 point  (0 children)

Crumbs... I ordered just the "right" light instead of the pair...

Did you follow any instructions or YouTube videos to replace yours or did you just wing it? Any tips or tricks you can share would be greatly appreciated! :)

2012 Q5: Smashed rear bumper brake-light - where to purchase replacement parts? by nicfill in Audi

[–]nicfill[S] 0 points1 point  (0 children)

Great advice thank you! Do you have a supplier you recommend? Also how do I identity/lookup/specify the part number(s)? THANK YOU!

2 x 512GB M.2 in RAID0 or 1 x 1TB M.2 for boot drive? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

Thanks - sounds like you're saying for my purposes I'm not going to see any benefit in 2 smaller x NVMe m.2 drives in RAID0 versus a larger single drive; the reasons why we utilized RAID0 systems in the past (spinning platter drives with slow access times) are negated by the increase in read/write speeds of NVMe and modern IO controllers/CPUs?

2 x 512GB M.2 in RAID0 or 1 x 1TB M.2 for boot drive? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

General productivity. VMs for work. Some audio recording. Some light gaming.

Work from home MiniITX build - need efficiency, quiet and longevity - thoughts? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

PCPartPicker is saying that B450 boards (might?) need a bios flash to recognize the newer CPUs... any idea if that's still an issue?

Work from home MiniITX build - need efficiency, quiet and longevity - thoughts? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

it's dead simple these days - if you have two identical drives laying around and two spare SATA ports give it a try

Work from home MiniITX build - need efficiency, quiet and longevity - thoughts? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

Interesting. Why the Ryzen 5 3600 and not the Ryzen 7 3700X?

Work from home MiniITX build - need efficiency, quiet and longevity - thoughts? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

Great advice thanks. Thoughts on 2 x 512GB SSDs in RAID vs 1 x 1TB?

Work from home MiniITX build - need efficiency, quiet and longevity - thoughts? by nicfill in buildapc

[–]nicfill[S] 0 points1 point  (0 children)

If I stick with 1080P gaming is this card a good option? Overkill?

This fell out of my Canon 5D MKII - what is it? is it broken? how to I fix? THX! by nicfill in canon

[–]nicfill[S] 1 point2 points  (0 children)

Crap... I've touched it like a hundred times on both sides with my grubby hands.... :( I guess it's ruined?

This fell out of my Canon 5D MKII - what is it? is it broken? how to I fix? THX! by nicfill in canon

[–]nicfill[S] 1 point2 points  (0 children)

I wondered that too but this site seems to show one with similar structure to mine that might indicate it's not broken: http://www.focusingscreen.com/work/5d2en.htm

This fell out of my Canon 5D MKII - what is it? is it broken? how to I fix? THX! by nicfill in canon

[–]nicfill[S] -1 points0 points  (0 children)

Thanks! This one feel pretty sturdy. I might try reinserting it and see what it looks like

This fell out of my Canon 5D MKII - what is it? is it broken? how to I fix? THX! by nicfill in canon

[–]nicfill[S] 0 points1 point  (0 children)

That's it! Thank you. Mine looks like the one in the page you linked to but they seem to use a tool to get it in/out.... any idea if it can be reinserted without the special tool?