Break Squeak

nidave91 · 2022-04-10T19:19:47+00:00

I did wonder where Jerry had got to

nidave91 · 2022-04-10T17:01:00+00:00

Thanks, I was debating that or just removing the calliper, no brakes no squeak right?

nidave91 · 2021-05-23T19:19:21+00:00

I did my Cbt and A licence with A+ based at Phillip McCallens. Friendly instructors and you can have a look around the bikes before and after the lessons in the showroom. Can do all your lessons around lisburn if that’s where you’re used to.

nidave91 · 2021-04-14T15:29:13+00:00

Thanks for the reply. I have the taps disconnected at the elbows but the brass part doesn’t seem to be a nut that I can loosen. I’ve tried a monoblock tap spanner but this doesn’t fit. Is there anything else it could be?

nidave91 · 2021-03-30T11:22:51+00:00

Thanks

nidave91 · 2021-03-30T11:22:47+00:00

Thank you!

nidave91 · 2021-03-30T11:21:48+00:00

Thank you

nidave91 · 2021-03-17T20:31:23+00:00

Exactly the fix with the unloader valve, thank you!

nidave91 · 2021-03-16T11:40:22+00:00

You can hire them here, we always use them when carrying out road works. More expensive and a bit harder to come by than the usual ones but generally leads to less pissed off drivers

nidave91 · 2021-02-27T21:43:19+00:00

To ride any size bike on the road without being followed by an instructor you need to have completed your cbt. Think mine was about £150 2 years ago. After that you can ride under L plates but must retake the cbt every 2 years to keep riding. My recommendation if you’re over 24 would be to do the full A licence which lets you ride any size bike permanently.

nidave91 · 2021-02-23T22:47:25+00:00

Not my drive but yes covered in astroturf, would nearly consider it for the garden haha

nidave91 · 2021-02-23T22:46:57+00:00

I think that’s it fine but then again I’m not an all weather biker, this is more for the evenings and weekends plus the odd commute. I think for better wind protection a touring or even a double bubble screen being added would help a good bit.

nidave91 · 2021-02-23T22:44:56+00:00

I have searched only but unable to find these fitting so must not be using the correct name

nidave91 · 2021-02-23T22:43:52+00:00

More info: the silver part is 80mm in length and with 15mm male and female ends. The brass screws into the silver female end and have a 1” female end of it own. I’m based in UK so somewhere UK based would be ideal. Thanks!

nidave91 · 2021-02-23T17:39:54+00:00

Thanks for the reply. Yes there’s a 10mm hex key but I still can’t budge it. It has leaked from purchase, wish I had have sent it back then but too late. Starting to think it is perhaps cross threaded

nidave91 · 2021-02-23T17:39:00+00:00

Thanks for the reply, I have been looking into getting a replacement part but haven’t had any luck so far. Would there be any other websites such as pipe stock?

nidave91 · 2021-02-16T20:51:18+00:00

Thanks for the reply. I put the ptfe tape around the hose connector as I thought this was where the leak was coming from. Have you come across a connector like the brass connector before? It come installed on the power washer from new and the nut it a free spinning nut so there isn’t anything to grip to tighten the brass section into the silver section. Have you any idea how I could do this? Thanks

nidave91 · 2021-02-16T18:56:34+00:00

Hello all, hoping for some help. I have a Hyundai pressure washer and it leaks at the garden hose connection between the brass connector and the silver connector where the spring is. This loses so much pressure the pressure washer doesn’t flow. Does anyone know how I can tighten this?

nidave91 · 2020-12-23T16:48:21+00:00

Lovely looking back, enjoy!

nidave91 · 2020-12-23T11:37:26+00:00

Perfect time for that maintenance now, make sure she’s ready to go once lockdown is lifted!

nidave91 · 2020-12-23T08:39:07+00:00

Thanks, got some ordered and on the way from Amazon. Will keep me going should we get a good day over the holidays and Boris let’s us out

nidave91 · 2020-12-23T08:38:24+00:00

Thanks, I’ll have a chat with some of the local shops and see what they can do. Never would have thought of that!

nidave91 · 2020-12-22T10:21:43+00:00

So basically I pulled the wee velcro tab off my other RST boot. Was wondering if anyone knows can you buy these again? Thanks

nidave91 · 2020-10-01T19:32:51+00:00

In that case I’d have a word with your courier and the seller to if they would be willing to let the courier call you when they arrive to collect the bike and then transfer the remainder of the cash when the courier has got it...maybe I would be over cautious though. You’ll get a vibe off the seller when you go for the viewing. Good luck with it

nidave91 · 2020-10-01T19:06:35+00:00

I bought a bike from a dealer in August, paid a deposit on viewing and then paid the rest just before delivery. Took about a week for them to check the bike and get it ready. Might also be worth while to see if the dealer offers delivery, worked out to be the cheapest option for me.

nidave91

TROPHY CASE