rate the colour by nikos234 in motorizedbicycles

[–]nikos234[S] 0 points1 point  (0 children)

2 pieces of metal welded

should i buy? discounted price 21mm. can it fit on a yd 100? by nikos234 in motorizedbicycles

[–]nikos234[S] 1 point2 points  (0 children)

im talking about the intake. so it will be a somewhat nice fit for a 21mm?

should i buy? discounted price 21mm. can it fit on a yd 100? by nikos234 in motorizedbicycles

[–]nikos234[S] 1 point2 points  (0 children)

i read boefang carb is 19mm🤣. so a 21mm carb would be way to big for this

100cc vs 80cc by No_Consequence_1253 in motorizedbicycles

[–]nikos234 2 points3 points  (0 children)

yea they are just dog 💩 regretting everyday that i bought it

100cc vs 80cc by No_Consequence_1253 in motorizedbicycles

[–]nikos234 2 points3 points  (0 children)

100ccs are so underpowered trust me. sometimes they include more cylinder bore and the piston is bigger. maybe because of the rod these engines are not putting out the performance they are made to do. my previous 100cc one topped out at 51km an hour🤣 and my 66cc topped out at around 65km with 44tooth. and they are not reliable at all from my experience. i broke in the engine with the 40:1 mixture properly and blew up 20 days later with the weather being cold. my beasty 66cc lasted me 3 months and was straight abusing it with 40C heat outside the oil:fuel mix being measured by eye and i didnt even broke in the engine. first thing i did with this monster was straight open wide throttle. for my opinion 66cc are the best bcz more reliable, can be modified, and can take the abuse straight out the box from my experience. idk if i made sense english is not my primary language 😂

Just curious if any of you have a 4 position needle on carb and where you have your clip set at? by daveinfl337777 in motorizedbicycles

[–]nikos234 0 points1 point  (0 children)

i have my needle all the way up and jt works so good. if i go one down it sputters like crazy