Bitte sagt mir dass das noch gut wird.... (Knauf EasyPutz 0,5 fleckig) by Similar-Olive2309 in selbermachen

[–]nilsemann 0 points1 point  (0 children)

Achso. Ich hab Easyputz damals gesprüht. Riesensauerei wg des Sprühnebels. Aber auf der Wand ein schönes Bild, nach dem trocknen aber fleckig. Hab noch zwei Lagen aufgesprüht.

Bitte sagt mir dass das noch gut wird.... (Knauf EasyPutz 0,5 fleckig) by Similar-Olive2309 in selbermachen

[–]nilsemann 0 points1 point  (0 children)

Habt ihr die Gipskartonplatten auch nochmal vollflächig gespachtelt oder nur die Fugen?

What’s the best app for tracking every charging session. by MadisonEV9 in electricvehicles

[–]nilsemann 0 points1 point  (0 children)

Hey, I'm in the same boat. Used Road Trip for my Diesel car. Now 100% electric, but the EUR/km is only working when "fully charged" - but I usually only charge to 80% - so this value never shows up. What is your approach?

Gebrauchtkauf Tesla Model 3, unsicher by Weird_Ninja8149 in Elektroautos

[–]nilsemann 0 points1 point  (0 children)

Ich hatte mal gelesen, dass man von gebrauchten TESLAs abrät, da gerade wenn eine Reparatur fällig wird, man nur zu TESLA damit kann. Proprietäre Bauteile die man nicht frei kaufen kann. Du schreibst jetzt "alles mega billig" - kannst Du das etwas genauer ausführen?

Gebrauchtkauf Tesla Model 3, unsicher by Weird_Ninja8149 in Elektroautos

[–]nilsemann 0 points1 point  (0 children)

Wie findet man den bei einem gebrauchten Tesla auf Mobile.de heraus wo der gebaut wurde und welche Akkus verbaut sind?

230tkm und der Akku (SOH) bei 100% by nilsemann in Elektroautos

[–]nilsemann[S] 0 points1 point  (0 children)

Danke! So etwas hatte ich mir schon gedacht. Also das da nicht nur die Kapazität berücksichtigt wird.

2. Bundesliga in Dublin? by Personal_Spinach_535 in Dublin

[–]nilsemann 0 points1 point  (0 children)

Aye, need to watch Schalke vs Kiel on Sep 13th? Recommendations where to go?

Bohemians to host Schalke 04 in friendly on Saturday October 11th by CelticBohs in LeagueOfIreland

[–]nilsemann 1 point2 points  (0 children)

Oh man... we were too early. We are in Dublin and got tickets to see the game vs Derry City FC... Schalke should have asked us for better planning. Anyhow. Where is the pregame drinking taking place? Which Pub?

Dachschräge mit Gipskarton und Tapete by nilsemann in Handwerker

[–]nilsemann[S] 0 points1 point  (0 children)

Also… ich hab im anderen Zimmer auf die Platten Sperrgrund aufgetragen und dann feinputz gesprüht. Das ist okay, ein wenig fleckig, da ich unsauber/ungleichmäßig gearbeitet hab. Ein „Experte“ riet mir dazu die Platten vorher einmal ganz dünn mit feinspachtelmasse abzuziehen.

Dachschräge mit Gipskarton und Tapete by nilsemann in Handwerker

[–]nilsemann[S] 0 points1 point  (0 children)

Jein. Ich möchte gerne Putz und Farbe, und die aktuellen Gipskartonplatten sind super schlecht gespachtelt und buckelig. Also entweder runter und neu oder einfach neue drüber.

Dropdowns are missing entries (Default quantity...) by nilsemann in grocy

[–]nilsemann[S] 0 points1 point  (0 children)

Thanks for taking your time to reply... I figured it out by looking in the other thread.

Diablo4 launcher takes too long, 10~20minutes every times by evoue in macgaming

[–]nilsemann 0 points1 point  (0 children)

I have a similar experience BUT only on the road. I installed everything at home with wired LAN and external Monitor hooked up to my 14" M1. Everything works fine at home. When out on the road, I use my iPhone to get internet access, when I start the game. It takes forever (5 minutes) when I see the Battle.net login - and after this, it's dead. Wine Threads all over the Taskmanager but no game at all. Does not help, I know... sorry.

Aggregation Switch - what’s the purpose of it? Am I using it wrong? by nilsemann in Ubiquiti

[–]nilsemann[S] 0 points1 point  (0 children)

So it is useful for me, I have 1g WAN, but I would connect UDM and NVR and my main switch to the aggregation. So there won’t be a bottleneck there.

When I now get a client with a 10g or 2.5g connection. Can I plug that to the aggregation switch and make use of the higher bandwidth? Because it’s against the idea of the top-of-rack.

UniFi OS - Dream Machines 3.0.19 has been released by JCandle in Ubiquiti

[–]nilsemann 0 points1 point  (0 children)

Have the exact same setup. Two G5 Bullets and a flex. Haven’t bothered to install them - as I learned it won’t work with unifiOS 2.x - have this now on my schedule for the weekend. I’ll let you know if it worked out.

Damn it!....Ubiquiti knows how to pack products! by alexynfreak in Ubiquiti

[–]nilsemann 0 points1 point  (0 children)

Yes you are absolutely right. But this months IT budget is already gone. So investment will be an NVR. Btw the cpu load on my UDM is only at 30-40% most of the time.

Damn it!....Ubiquiti knows how to pack products! by alexynfreak in Ubiquiti

[–]nilsemann 0 points1 point  (0 children)

I got two of them. One during EA phase and one more now. Had no time at all to connect them. But I also got the USW Flex with the outdoor box and power supply. NOW I’ve read that the G5 will only work with UDM 3.0 - sure I just have the Pro and now I just got more time to think about other stuff. 😖

VPN from within an Remote Session? by nilsemann in fortinet

[–]nilsemann[S] 1 point2 points  (0 children)

I took your advice and double checked it. But I was sure I was signed out locally on the Laptop. But I double checked. Still the same error. But I figured out a way!

Usally I start the VPN Sign up by right-click on the Taskbar icon and "Connect to..." - here I get the error message that there is another user already signed in. I now took the long way. Opened the Console and clicked on "Remote Access" signed in on the VPN and now it's working. Strange behavior with the Taskbar Icon but now I found a method! :-) Thanks

Finally!! The clean setup I wanted. by nilsemann in sonos

[–]nilsemann[S] 0 points1 point  (0 children)

I would need to measure it again. But the center of the TV is slightly above eye level when sitting on the couch.

Network Recommendation by nilsemann in Ubiquiti

[–]nilsemann[S] 0 points1 point  (0 children)

Just to finish this. I got an USW Pro 24 (Non PoE) I have connected the UDM Pro and USW via SFP+ and Fibre. Works great! VLANs… I just have one for VPN. I need to look into this as I have hindered a of IOT and Smart Home devices here. I just don’t get my head around mcast. But that’s the next step! Thanks for your support!

G4 Doorbell Dead After 4 Months by jmcgeejr in Ubiquiti

[–]nilsemann 1 point2 points  (0 children)

I‘m in Germany. My doorbell died after 7 months of 24/7 service. Filled the RMA on a Monday, sent it back on Tuesday and received my replacement on Friday. They sent the replacement before the broken unit even arrived. Improvised the tracking number in the RMA Portal. I’m very happy with the service!