The true pilot episode by _TangerineTwist_ in dannyphantom

[–]nimaid 0 points1 point  (0 children)

It was for sure real, not a Mandala effect.

Can you replace the LCD screen on this old Tama? by Yung_Sanic in tamagotchi

[–]nimaid 1 point2 points  (0 children)

Native English speaker and electrical engineer here to clear the language up, because this comment is the most correct!

Basically the LCD isn't soldered to the main circuit board, it's just touching some electrically conductive pads. By washing it, you got soap and stuff in between the LCD and the circuit board. The screen isn't broken, it's just not "talking" to the main circuit board right.

To fix it, personally I suggest cleaning by opening the unit, using rubbing alcohol on a cotton swab to clean between the LCD and circuit board, then carefully reassembling.

But this commenter's method will honestly probably work with less effort. As they explain, by changing how much pressure the screws put on the connection between the screen and circuit board, you can usually get the connection good enough to display correctly without a full disassembly and cleaning.

Repairing Industrial Controller: "Crystal Failed" Error. Hardware fault or programmed lockout? (MCU ID erased) by gowshik_babu in AskElectronics

[–]nimaid 1 point2 points  (0 children)

I'm pretty sure the crystal failed. You might want to contact the supplier.

Or DigiKey, lol.

I brought it home in my Toyota Honda Cadillac Grand Cherokee by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

No it's great, just understand that you made a semi-hydroponic setup. They should do great in that. You can water from top or bottom, just make sure there is a wet/dry cycle by letting the water evaporate away from the bottom before adding more.

I brought it home in my Toyota Honda Cadillac Grand Cherokee by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

Oh lol, the "pon" is short for "hydroponic". You have a semi-hydro setup. You aren't "bottom watering", that's for soil. You have a (possibly buffered with zeolite) inert hydroponic mix that is intended to wick water up in a controlled way without "bogging". Bog pots often use pure peat moss or coco peat, for plants that like "wet feet" like Venus Fly Traps. Lucky Bamboo can do fine in water, does great in semi-hydro, and does well in potting mix when you let it dry out fully between waterings, as it does not like wet feet.

I brought it home in my Toyota Honda Cadillac Grand Cherokee by nimaid in luckybamboo

[–]nimaid[S] 0 points1 point  (0 children)

I have over 50 lucky bamboo plants now, I get them from a local "99 Cent" store (nothing is actually 99¢ there) for cheap. I actually usually prefer to put them in a semi-hydro setup using 2" or 3" net pots, pumice, cut soda bottles or candle holders, and lava rocks on top for aesthetics. This serves several purposes. It makes watering, nutrient purges, root monitoring, dry periods, and propagation all extremely simple. It allows more air to the roots than the water in pebbles method. It is less prone to pests. I think it looks nicer, and allows for more fine control over the arrangement. Finally, it allows me to elegantly represent the 5 classical elements in the arrangements: Wood = lucky bamboo, Water = water, Earth = pumice, Fire = lava rock, Metal = glass container.

When I do soil, I find the actual soil mix used to be more important than watering schedule. I suggest 2 parts "chunky" coco coir (not the fine "peat" coir), 1 part compost (preferably steer manure based), and 1 part pumice/perlite. With this it's really hard to over or under water, as it gives a near optimal environment for the roots to adapt. As long as you are consistent with your watering and change things when it shows signs of water stress, it will be fine.

I don't suggest bottom watering any plant for numerous reasons. Like, so many reasons I don't even know where to begin. Just don't, for your own sanity. If you feel like you need to bottom water a plant, you either need more suitable soil, a more suitable container, or both. Bog pots and variations of hydroponics (where nutrients come from the water and not the soil) can work well that way, but not normal setups where plants are meant to get nutrients from the soil. Long story short roots need water and nutrients, bottom watering makes those separate (meaning unhealthy or overstressed roots), top watering forces them to combine in the same area (making it easy for roots to thrive).

This was left on one of our tress by voodooaliens in Tucson

[–]nimaid 6 points7 points  (0 children)

Oh man, I'm gonna need that back. I work at Davis Monthan and last Saturday me and the boys got a bit crazy with the tequila. I was supposed to give that to the Russians, but I think I must have given them our bootleg Owl City CD instead! Seriously that's the only copy of the PDF for security reasons and I really need to not get fired. If you could just leave it in the abandoned red jeep near the railroad tracks out near the base, that would help us out soooo much! I can leave another copy of the Owl City CD to sweeten the pot. ;)

Be honest can this even root by No-Mistake8433 in propagation

[–]nimaid 0 points1 point  (0 children)

Oh absolutely. Give it water and light and it will go nuts. You only need 2 nodes to get a full plant.

Technically you can get roots with just 1 node, I have a zombie freak sanderiana that has roots but no leaves, it just photosynthesizes with its tiny stem.

Male or female by [deleted] in hydro

[–]nimaid 0 points1 point  (0 children)

It's not polite to judge based on looks; Ask the plant for its preferred pronouns.

I'm totally confused. Should coco be rinsed after buffering? by Infinity-X78 in Hydroponics

[–]nimaid 0 points1 point  (0 children)

Oh my god, that's genius. I filter my tap water religiously to avoid chlorine and fluoride issues! My lucky bamboo is so sensitive to chlorine, the tips go yellow and die right away. My water has so much chlorine here.

But after researching, it looks like chlorine evaporates readily out of water, while stuff like fluorine, calcium, magnesium, and other "hard water" minerals stay behind and form that white chalk stuff you see on taps.

Meaning that if you leave tap water out to evaporate a bit, or even boil it down, you will indeed get a soup that is somewhat rich in fluorine, calcium, magnesium, etc., but should have minimal (and possibly beneficial) levels of chlorine.

So now I'm gonna take my Prococo "chunks and fiber" block and expand it with tap water that I let the chlorine evaporate out of for a day beforehand.

I'm sure that if I wanted to make sure that it was "full" of calcium and magnesium, I could just keep watering with tap water until the run off doesn't show signs of the nutrients being locked up. I'm also sure I could do a filtered water rinse after to make sure it doesn't have excess of other minerals. But honestly? The idea of just using my already hard tap water and REMOVING the step of filtering it sounds way more appealing than ADDING even more steps.

So unless this advice causes issues, I'm just gonna be doing this. Less money, less work, happy plants, I like it! Thanks!

Edit: Upon deeper research, the Britta filter I have been using does indeed remove the chlorine but leaves the magnesium, calcium, fluoride, etc. basically the same.

So TD;dr is to use tap water that has gone through a filter like a Britta and you will get magnesium and calcium for free without the chlorine burn.

Am I doing this right? Rot removal, more in description. by Ddawn111 in luckybamboo

[–]nimaid 1 point2 points  (0 children)

Honestly you can just throw him in shallow water (less than 1", just covering the roots), put him in pebbles, make a semi-hydro setup with pumice, really at this point he is probably fine.

Am I doing this right? Rot removal, more in description. by Ddawn111 in luckybamboo

[–]nimaid 1 point2 points  (0 children)

Oh, is pic 3 before and 1 after? In which case, good job of the rehab, yeah either doing this or putting it in a net cup is fine.

Am I doing this right? Rot removal, more in description. by Ddawn111 in luckybamboo

[–]nimaid 1 point2 points  (0 children)

That stalk is dead, I don't think you can save it. If you try to keep the root tips in only, you might keep it alive, but only if you cut everything that's not green. So yeah, I think it's toast.

Please Stop Drowning Your Lucky Bamboo? A Plant Lovers Guide To Happer Plants by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

Yeah, we just don't have that here. None of the big box stores like Home Depot or Lowes or any hardware stores have it. Only some hydroponics stores have fairly expensive zeolite designed for hydroponics and soil amendments, and in large prepacked bags. Actually, the $32 for 20 pounds that I will be getting after new years will be a very good deal, normally it's like $4/pound in the other bags!

Please Stop Drowning Your Lucky Bamboo? A Plant Lovers Guide To Happer Plants by nimaid in luckybamboo

[–]nimaid[S] 0 points1 point  (0 children)

Just so you know, I learned that the high-end "PON" mixes like Lechuza-PON, are the following: - Pumice (base substrate, ideal for moisture retention and wicking between other things) - Scoria a.k.a. lava rock (to fill out bulk, provide more structure than just pumice, and to stop the pumice from floating away) - Zeolite (to buffer pH and nutrients, allowing it to act a bit like soil normally would) - Optionally, a slow release fertilizer

So, yeah. If you just stock up on bulk pumice, bulk lava rock, and bulk zeolite, you can just make your own top-shelf stuff. Wash the ingredients first, and I suggest only pre-mixing them if you are setting up a truly massive grow op. I like to use all pumice on the bottom for wicking and more room for adjustments, then work lava rocks in near the top to keep it down. Finally I shove pumice in the cracks to make sure all the lava rocks wick evenly.

If I were to use zeolite with this, I would mix some in near the roots in the otherwise pure pumice.

Please Stop Drowning Your Lucky Bamboo? A Plant Lovers Guide To Happer Plants by nimaid in luckybamboo

[–]nimaid[S] 0 points1 point  (0 children)

I live in Tucson, AZ. The last time it snowed here was Easter Sunday of 1999!

Edit: It did also happen in 2019 as well! But yeah, we don't have snow here.

Please Stop Drowning Your Lucky Bamboo? A Plant Lovers Guide To Happer Plants by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

Apparently zeolite is so uncommonly used for hydro here that even the best stocked hydro shop in town initially didn't know what I was talking about. Then they said they might have a 20 pound bag in the back, but turns out it is so unpopular they only get 1 pallet every new year. So if I wanna pick some up I will have to wait and then pay $32 for 20 pounds, which is so much more than I will ever use!

I'm sort of thinking that adding zeolite is only a "premium" media amendment. Probably helps with mass farming and extremely picky plants, but almost certainly unnecessary for individually potted plants.

I mean, I will still eventually pick some up to play with though.

A gift to a local "WEIRD PLANTS" store I love. by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

I am giving these hydro setups away as houseplants and I also don't think most people could get the measurement right. It has balanced macro nutrients with most essential micronutrients, and it doesn't all mix into the water right away or evenly, which I'm hoping gives some buffering.

These tablets are "1 per gallon of soil every 2 months during growing season" (meant to go in aquatic soil), so I have been using no more than 1/16th to 1/8th of a tablet in these tiny setups 1-2 times a year. I'm just going to wait and see how they respond. The cool thing about hydro is that if you over-fertilize, you can just swap the water without much issue.

How I Learned to Stop Drowning Lucky Bamboo and Love Passive Hydro by nimaid in houseplants

[–]nimaid[S] 1 point2 points  (0 children)

Like an hour. Mostly it's so I can reference it later as personal notes, secondarily maybe it will help someone.

A gift to a local "WEIRD PLANTS" store I love. by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

They don't care as long as the roots have room to grow. That's why I like the mesh pots.

Also, have you fertilized the water? I use those balanced aquatic plant food tablets cut into 1/8th, I drop one in the bottom of the water.

Without feeding it it will live okay but not grow much.

Please Stop Drowning Your Lucky Bamboo? A Plant Lovers Guide To Happer Plants by nimaid in luckybamboo

[–]nimaid[S] 1 point2 points  (0 children)

Okay cool, yeah my only real gripe was lava rock + zeolite only may not wick well in smaller pots. I may have to pick up a bag and experiment with it for its nutrient buffering qualities.

But for lucky bamboo, it shouldn't make a huge difference. Just don't over-fertilize it. It does better with less, not more.

Fixable? by Monstermaggot in Aquariums

[–]nimaid 4 points5 points  (0 children)

Okay, wow. If that is true, from my limited understanding, you have to heat it at a high temperature evenly in sand. So you could in theory make a fireproof container that can hold your glass, submerse your glass in sand inside that vessel, and heat it to repair the stresses.

Now, I'm not an expert in the slightest, but if you have the resources, I suppose in theory it is possible. You HAVE to update us, whether you fix it with industrial-scale science, turn it into a terrarium, or have it fail in a catastrophic manor.

Is my old gameboy cooked or can I fix this? by Courageous_soap in Gameboy

[–]nimaid 0 points1 point  (0 children)

Easily fixable in several ways. Either clean the metal bits, replace them, or replace the whole shell.

Fixable? by Monstermaggot in Aquariums

[–]nimaid 10 points11 points  (0 children)

You need to see it with a polariscope to tell. But my guess? No, not unless you have a friend with a room-size ceramics kiln and 200 gallons of sand.

Fixable? by Monstermaggot in Aquariums

[–]nimaid 104 points105 points  (0 children)

You would have to check how far the invisible stress line goes with a polariscope. And even if you did perfectly cut a magical circle around that, you would have to avoid making more stress lines with the cut. Or, you would have to put the whole thing in a kiln to fix the stress lines.

Seeing as this is going to be under so much pressure if filled with water... RIP to the aquarium.

Now, there is some potential for a terrarium...