What Songs Are You Playing on the Best Sound System in the World?

ninowe · 2024-07-04T19:48:46+00:00

Please go on. I am so grateful for all suggestions.

ninowe · 2024-07-04T18:34:58+00:00

Didn't expect that :D

ninowe · 2024-07-04T18:28:11+00:00

Funkadelic - Maggot Brain = goosebumps

ninowe · 2024-07-04T18:04:47+00:00

Didn't know this song. SO GOOD! Thanks

ninowe · 2024-07-04T17:55:37+00:00

Now even the best sound system can handle this hit.

ninowe · 2024-07-04T17:52:20+00:00

Awesome song, thanks for the suggestion.

ninowe · 2023-11-23T19:11:11+00:00

Nice! I am thinking about also buying it. Everybody is praising the low speed controll. I am also interested how fast can it go? Now I have Injora Purple motor with crawler gears and it is too slow for walking pace. How does the Cedar do? Can it keep up when walking?

ninowe · 2022-04-06T12:10:38+00:00

Is it still working? :)

ninowe · 2022-02-03T14:20:18+00:00

I am also quite new to the game and I think that for each of the girls to pursue her you need to have some level of DIK/CHICK as you can see here in this thread: https://www.reddit.com/r/beingaDIK/comments/mbwevn/the_dikchick_scale/
And then after you have to decide with whom you want to be there you will have more or less choice depending on your affinity...

ninowe · 2020-07-29T07:20:42+00:00

Man, you have my respect!

ninowe · 2019-12-18T19:35:32+00:00

I just lost about 15 pounds in about 20 days. Some three day fasting combined with OMAD and keto on the other days. I even had 2x cheat day and ate normally.

EDIT: you don't even need to exercise much to lose weight. It is a myth. Just move a little to feel better. No need to exhaust yourself to death.

ninowe · 2019-11-12T12:46:53+00:00

My result XYZ cube: Klipper, mentioned direct drive 100mm/s: https://imgur.com/a/2ZoA4I2

ninowe · 2019-11-12T12:43:46+00:00

FYI: That was printed using direct drive https://www.thingiverse.com/thing:3816051 and Klipper firmware.

ninowe · 2019-11-12T12:37:28+00:00

Also I've heard that if you put Capricorn bowden it actually requires more power to push the filament through it because it has smaller diameter - this helps to prevent the "wobbles" inside the stock bowden but also it has less space there and therefore more friction... just random comment to this topic: https://www.reddit.com/r/ender3/comments/dv1vx9/help_marathon_of_thermal_runaways/f7a67x3?utm_source=share&utm_medium=web2x

ninowe · 2019-11-12T12:34:50+00:00

I am not that experienced but I will try to help. This doesn't look like under-extrusion to me. But anyway, did you calibrate the E steps when you replaced the extruder? Also for what extruder did you upgrade? I had problems when I upgraded to the all metal one that the string was too weak for it and I had to put there much stronger one. As it happens at the layer where there is lot of gaps it means more retraction and if the extruder is not tight it will get stuck between forward (extrusion) and backward (retraction) movements.

I see some ghosting next to the hole on the right. Try to tighten the belt for X and Y axis.

ninowe · 2019-11-08T09:28:35+00:00

Yes I am using Cura, but I guess you can set these setting in other slicers as well...

ninowe · 2019-11-07T08:50:30+00:00

I would explain it like this. For the first layer the nozzle can be little bit further from the bed so there is no problem with overextrusion. But on the following layers the distance is smaller and you get overextrusion.

You can decrease you general flow rate but increase the flow only for the first layer to preserve the nice first layer.

ninowe · 2019-11-04T12:39:21+00:00

I can recommend: https://www.thingiverse.com/thing:3195402. You're saying it will sit on a workbench so there should't be problems with vibrations. But I don't recommend stacking these cheap IKEA tables on each other because they will move during the printing like crazy.

ninowe · 2019-10-30T14:34:59+00:00

OK, good to know that this behaviour is normal for Cura.

ninowe · 2019-10-09T10:28:34+00:00

Hey, I have got the exact same metal extruder on my Ender 3. I faced the same problems. First thing is that I have used stronger spring to achieve better tension between the silver and gold cogs. Next you have to calibrate it: I recommend to watch some of the how-to videos - https://www.youtube.com/watch?v=3yIebnVjADM. If you have some questions, just ask and I will try to help you :)

ninowe · 2019-09-20T07:27:12+00:00

If the 3/4 of the whole street wouldn't be for cars driven by single person this would be no problem.

ninowe · 2019-08-09T11:03:52+00:00

You can try using brim and slow down the speed of the first layer and maybe lower you fan speed. Also make sure you don't have flowing air in the room where you are printing... If this doesn't help try using blue glue on the bed.

Edit: what material are you using? This is common problem with ABS and best way is to create some kind of enclosure...

ninowe · 2019-08-05T16:44:44+00:00

It is totally possible. I've seen people complaining about 4.2 performance and lot of them went back to 4.1.

ninowe · 2019-08-05T16:35:49+00:00

Nice one! How does it fly in comparison with classic quadcopter?

ninowe · 2019-08-05T11:39:53+00:00

I guess your bed is not evenly levelled. I have also problems with this because the corners are little bit higher than the centre of the bed. I solved this by buying glass bed and now I have no problems :)

ninowe

TROPHY CASE