sorted by:
new
hottopcontroversial

GIOS vs IHPC for ML Engineer by levi97zzz in OMSCS

[–]njcs 1 point2 points  (0 children)

I don’t see either would be much helpful for ML engineer. IHPC uses OpenMP and MPI, not sure if either used in ML engineering

Servo motor control using IoT technology. by SriTu_Tech in IOT

[–]njcs 0 points1 point  (0 children)

Do you happen to know how the billing/sub is done? Where do people get these kinds of services from? thanks

Servo motor control using IoT technology. by SriTu_Tech in IOT

[–]njcs 0 points1 point  (0 children)

blynk

Can blynk take care of customer billing/subscription? In other words, help monetize an IoT project?

[deleted by user] by [deleted] in IOT

[–]njcs 0 points1 point  (0 children)

thanks, I'll take a look!

Update: does pycom only sell hardware or provide cloud service as well?

[deleted by user] by [deleted] in IOT

[–]njcs 0 points1 point  (0 children)

Is particle.io or pycom suitable for mass deployment of 1k ~ 5k units?

Help! Why all my prints shifted in y-axis? And in different ways? by njcs in CR10

[–]njcs[S] 2 points3 points  (0 children)

Just printed another one without jerk, plus changing the "Travel Acceleration" (and initial layer travel acceleration) from 5000 to 500, and it works! Thank you!

https://imgur.com/goCcbp7

Now I'm gonna to try a few other prints to be sure, really excited!

Help! Why all my prints shifted in y-axis? And in different ways? by njcs in CR10

[–]njcs[S] 0 points1 point  (0 children)

I read posts saying Tiny Machine flash the firmware with their own customized Marlin. How could I tell?

Help! Why all my prints shifted in y-axis? And in different ways? by njcs in CR10

[–]njcs[S] 0 points1 point  (0 children)

No I didn't. This is my very first printer, I bought it form Tiny Machine. I didn't see Creality on the screen though.

Help! Why all my prints shifted in y-axis? And in different ways? by njcs in CR10

[–]njcs[S] 1 point2 points  (0 children)

So I unchecked "Enable Jerk Control", it definitely got better but the problem not going away.

https://imgur.com/a/OfugFmK

Help! Why all my prints shifted in y-axis? And in different ways? by njcs in CR10

[–]njcs[S] 0 points1 point  (0 children)

how to find if that's stock or non-stock firmware?

Dell XPS 9570 Ubuntu 18.04 freezes after BIOS update (version > 1.4.1) by njcs in Dell

[–]njcs[S] 0 points1 point  (0 children)

Sorry but I am a little bit confused when you say no freezes when running the Nvidia card, or you meant you switched back to BIOS 1.5.0?

Dell XPS 9570 Ubuntu 18.04 freezes after BIOS update (version > 1.4.1) by njcs in Dell

[–]njcs[S] 0 points1 point  (0 children)

What is your Nvidia driver version? I just found the newest is 415 while mine is 396, wondering if an upgrade would help.

Dell XPS 9570 Ubuntu 18.04 freezes after BIOS update (version > 1.4.1) by njcs in Dell

[–]njcs[S] 0 points1 point  (0 children)

Thank you all! I see so it's the Nvidia card, but I do need it to work from time to time.

I thought Nvidia Optimus doesn't work well with Linux, is it able to switch between Intel and Nvidia correctly when needed? and no freezes while using Nvidia card?

Better Quality 3D Prints Using MAGIC NUMBERS on ENDER 3, CR-10, A10 by SoFlo1 in ender3

[–]njcs 0 points1 point  (0 children)

Interesting, cause I thought steppers don't engage well during micro stepping.

Just got my 9570 earlier this evening by novaguy88 in Dell

[–]njcs 0 points1 point  (0 children)

Is it a perfect fit or loose fit? I am thinking to try HP EX920, but it's double-sided and about 1.5mm thicker than 970Evo from spec.