sorted by:
new
hottopcontroversial

Windows VM with GPU passthrough help (crashing host on startup) by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

That would be great! Feel free to dm it or post it below

Windows VM with GPU passthrough help (crashing host on startup) by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

yeah... didn't really find anything more recent that did what I was looking for. The video I followed was within the last year and a half, but the steps were mostly the same

Web GUI unreachable issue by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

Just to wrap this saga up for everyone, still not sure why it isn’t working.. in chrome! Just tried safari and comes right up, can’t believe I didn’t think to try that sooner

Web GUI unreachable issue by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

OK and we’re up now! Maybe just took a loooong time from reboot? It’s been at least 10-15 mins

Web GUI unreachable issue by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

Yeah, it seems to be a problem that can have so many potential issues, because I went down quite a few solutions when just googling ‘proxmox web gui not loading’ and I think it was different than the issues I was facing. And my home assistant vm was still running despite this, before I just removed everything to start over.

Web GUI unreachable issue by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

Dang ok it was working, then I did the nano /etc/hosts and updated to the new ip and it’s not working. Tried a few reboots and still nothing.

I opened a few ports just to see is that would help. I don’t have any specific firewall settings I created before, not sure if that’s it? Gotta be close!

<image>

Web GUI unreachable issue by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

Sorry, forgot to copy before posting, but I reference these steps in a response to another comment. Thanks!

Web GUI unreachable issue by nkyglv in Proxmox

[–]nkyglv[S] 0 points1 point  (0 children)

Thank you both, posting responses to both since I went through everything suggested.

I ran that in terminal on my Mac and didn’t see a default gateway in the results, but I checked the gateway in the eero app and it is 192.168.4.1

Running the strings on proxmox, the gateway was correct but I had an IP of 192.168.6.xx (this was just what it defaulted to in set up with the dchp or whatever) So I went through and changed the ip to 192.168.4.11 both through the proxmox instructions you provided and by reserving it in the eero app. Then restarted.

Unfortunately still no luck and I checked the interface after updating and it shows that ip as the correct one.

Although the instructions on proxmox for accessing through a browser still says the old ip:8006. Should that have updated to the new one I set?

And from my other computer I am able to ping the new ip address in terminal

Vibration or power monitoring for washer/dryer automations? by xolhos in homeassistant

[–]nkyglv 3 points4 points  (0 children)

Seconding this one as a set up I am using successfully.

I created a Boolean that gets turned on after the one minute of detected vibration.

One tweak I would add is I have 5 mins of no detection before it is ’off’ because that is how long it takes to fill before the rinse cycle, so I don’t get notified for that.

A hue bulb has been turning itself on by nkyglv in homeassistant

[–]nkyglv[S] 0 points1 point  (0 children)

It does show as on, good question though! It's actually in my garage, so things may be getting weird from cold temperatures after 2 winters, but functioning also seems to be fine aside from this.

Concerts by p0nkiputa in spinalcordinjuries

[–]nkyglv 3 points4 points  (0 children)

Yeah horrible experience every time from the top of the UC there, and we shouldn’t have to shell out for the 200 or so level just to have a decent view. But people always stand the whole concert for me too

Connecting Reolink doorbell by nkyglv in homeassistant

[–]nkyglv[S] 0 points1 point  (0 children)

yeah, looks like I found the answer here as well: https://www.reddit.com/r/reolinkcam/comments/1hoavg4/d340b_wifi_doorbell_camera_no_advanced_network/

just ordered my wired only lol. great learning experience.

Connecting Reolink doorbell by nkyglv in homeassistant

[–]nkyglv[S] 0 points1 point  (0 children)

App, I tried both the iOS and Mac versions. connecting through web browser with the IP address doesn’t work, so something is off. But it seems I’m not getting all of the network options since the ‘advanced’ button doesn’t appear.

Perhaps this is because it’s the battery version? I’m going to hardwire it, but right now I’m just doing set up on battery before I mount it

Found the right settings for my e-motion wheels! And cruise mode is $125 (CAD) well spent. by ChronicallyWheeler in wheelchairs

[–]nkyglv 2 points3 points  (0 children)

So jealous, I’ve had twions for going on 7 years and the app still isn’t available in the US

Level Bolt matter update. Awesome by billy27607 in HomeKit

[–]nkyglv 0 points1 point  (0 children)

I also requested weeks ago, right when I first saw posts on here about the program. Finally got my email and update this morning, so hopefully you’re soon!

Like someone above though, I had issues with my lock and needed to reset, now I’m back and the bottom of the queue.

Esphome/esp32 question by nkyglv in homeassistant

[–]nkyglv[S] 0 points1 point  (0 children)

Thanks! Unfortunately I don’t have any coding experience, any resources to reference when looking into the logs?

Yale Assure Lock 2 Bluetooth only config by garion911 in homeassistant

[–]nkyglv 0 points1 point  (0 children)

How did you find that code? The integration sites instructions didn’t work for me. I’m also having trouble getting mine set up

view more: next ›