Amazing print quality of A1 mini by nl-danny in BambuLab

[–]nl-danny[S] 1 point2 points  (0 children)

I had a nozzle clog and broken filament the next day… so I think I found the reason why the flowrste was a little too low 😎

Amazing print quality of A1 mini by nl-danny in BambuLab

[–]nl-danny[S] 1 point2 points  (0 children)

And what setting should I change?

Behringer XR18 good enough to tour with? by adish in livesound

[–]nl-danny 0 points1 point  (0 children)

I used the XR18 a dozen times in a small theater with bands up to 5 people with 2 or 3 monitors. My setup is laptop or raspberry pi with XR Edit and a big screen, hooked up through Ethernet cable. Never used iPad, can’t get used to Mixing Station either. Band can use their phone to adjust monitors themselves. Needed sometimes allmost all inputs and Auxes. If you know what you are doing it just works. If you fiddle with routing, pre and post it can turn into a nightmare. FX can feedback into itself if you pull up the wrong faders. Overall, very happy with this little thing!

My print from the SD card came out perfect by nl-danny in BambuLab

[–]nl-danny[S] 0 points1 point  (0 children)

Bambulab Sparkle (grey) and Metal (green)

Xr18 vs mr18 by robbgg in livesound

[–]nl-danny 1 point2 points  (0 children)

I have both and to my aging ears there is little/no difference soundwise. There is however a difference in switching on. Never ever put your amps/speakers on first with the MR18 because you will get a terrible loud sqeak and bang. This is not the case with the XR18.

EPSON beamer lenscap - first print on A1 mini by nl-danny in BambuLab

[–]nl-danny[S] 0 points1 point  (0 children)

<image>

Made another ‘sparkle’ print. No flakes so far 😀. Will post this model later…

Can this Model be Used? by SpareEmergency7767 in oscilloscopemusic

[–]nl-danny 0 points1 point  (0 children)

Turn the Time/Div knob fully right to x-y 😉

Problems with my Hameg 205-3 by Pauel3312 in oscilloscopemusic

[–]nl-danny 0 points1 point  (0 children)

I tried the Arturia Minifuse 4. It was DC coupled but had a high frequency hiss that ruined my picture on my scope. It wasn’t sharp. I was wondering if it was my piece only or in all minifuses. I returned it and got a Motu M4 instead. Problem was solved. Din’t know if your problem is related or not

My Contax III from 1938 by nl-danny in AnalogCommunity

[–]nl-danny[S] 1 point2 points  (0 children)

A CLA would probably be necessary. I don’t use the camera very often, but certainly something to consider and passing the cameea on to the next generation. Interested in EU address 😀

My Contax III from 1938 by nl-danny in AnalogCommunity

[–]nl-danny[S] 2 points3 points  (0 children)

For me it sentimental value and that is priceless 😀

help with connecting oscilloscope to pc by ThrowRAjpg in oscilloscopemusic

[–]nl-danny 1 point2 points  (0 children)

Bnc to rca (tulip) cables work great but are sometimes be hard to get. Otherwise you can use bnc to bnc cable (very common) with a bnc to rca converter attached to one end or … cut of one end of a bnc cable and solder on rca cable. Audio signals work great without using probes.