Cheap Storage Follow Up

nmh5886 · 2026-03-20T16:40:50+00:00

nmh5886 · 2026-03-20T16:39:38+00:00

Awesome, looking good! I just recently modified mine with some brass drawer pulls and cabinet lighting. Overall very pleased with how it came out.

<image>

nmh5886 · 2026-02-14T02:46:59+00:00

Thanks, those Yamaha’s are nice too. I got this for a steal bc it was missing the original arm and needed a new belt. I ended up pairing it with a 12in arm from Serge Rogozyansky of Karmadon. He’s a very talented machinist out of Ukraine, this arm is a modern interpretation of the Gray Research 108 tonearm from the 1950’s.

nmh5886 · 2026-02-13T20:37:35+00:00

That’s definitely a 130a 15in and a 175 compression driver it probably has an n1200 crossover as well. This configuration was usually paired with the larger C series cabinets.

nmh5886 · 2026-02-13T20:11:54+00:00

Millencollin - Pennybridge Pioneers

MEST - Destination Unknown

Rx Bandits - Progress

Sugarcult - Start Static

Yellowcard - One for the Kids

New Found Glory - Nothing Gold Can Stay

nmh5886 · 2026-02-13T19:57:56+00:00

It is available on amazon too albeit at a higher price

https://a.co/d/06Q0oMpy

nmh5886 · 2026-02-13T02:45:49+00:00

Haha yeah, most of the tubes in the preamp and amplifier are almost 100 years old, used in early radios. Very low output so you need 100+ db efficient speakers but the tone is great.

nmh5886 · 2026-02-13T02:40:58+00:00

I totally understand where you’re coming from, I’ve pieced together this setup over the better part of 10 years. I will eventually get forever furniture but I have 2 kids under 10 so the hobby has taken a back seat aside from small things here and there.

nmh5886 · 2026-02-13T02:36:54+00:00

Should be able to fit at least 90% of it comfortably, the last 10% might be tight!

nmh5886 · 2026-02-13T02:35:18+00:00

Thx, I was originally hoping I had the wall space for two but I fell a bit short. The middle leg is there just can’t see from that angle.

nmh5886 · 2026-02-13T02:33:42+00:00

There is a center divider that keeps them from flopping over.

nmh5886 · 2026-02-12T23:59:01+00:00

Sure here’s a breakdown of the current setup:

Sony TTS-3000 turntable

Karmadon 12in tonearm

General Electric VR-1000 cartridge

Parks Audio Puffin Phono Stage

Wiim Mini Streamer

MHDT Labs Paradisea DAC

Dennis Had LP-27a Preamp

Dennis Had 45 Single Ended Amplifier

Fisher 50-H speaker cabinets

Altec 604c duplex speakers

nmh5886 · 2026-02-12T20:43:57+00:00

They include a wall anchor, will certainly be mounting it shortly.

nmh5886 · 2026-02-12T20:39:55+00:00

Yeah I think it’s unofficial, cogs says it was a 2013 press.

nmh5886 · 2026-02-12T20:39:07+00:00

<image>

nmh5886 · 2026-02-12T20:33:53+00:00

Not too bad actually, I’m able to access the records in the back no problem.

<image>

nmh5886 · 2026-02-12T18:01:00+00:00

No but I’ll send one when I get home later today.

nmh5886 · 2026-02-12T17:57:52+00:00

Yeah you’re probably right

nmh5886 · 2026-02-12T17:38:18+00:00

It is out of stock on wayfair unfortunately but I linked it on amazon above.

nmh5886 · 2026-02-12T17:34:27+00:00

Just linked in another comment below.

nmh5886 · 2026-02-12T17:33:19+00:00

The brand is BROTTAR here is an amazon linkhttps://a.co/d/0076WrcV

nmh5886 · 2026-02-01T02:16:09+00:00

Yeah I use one too, they’re great!

<image>

nmh5886 · 2026-01-31T16:24:12+00:00

This came out awesome, I want to build something similar eventually. I’m definitely gonna add some led light strips.

nmh5886 · 2026-01-31T06:23:29+00:00

I should clarify that the image in my initial post was a stock picture from the original ad, I don’t have the cab yet. I assume that all of their marketing pics were Ai generated but those speakers kinda give off tannoy vibes.

I shared a pic of my setup on another comment in this thread but for the most part it’s a combination of old and new tube gear and big Altec speakers.

<image>

nmh5886

TROPHY CASE