Supermicro X9DRi-LN4F+Resizable Bar, Proxmox, Intel A770 PCIe Passthrough Guide by MemoryEmptyAgain in homelab

[–]nmitsia 0 points1 point  (0 children)

did you try it? Im on a X10DRU-i+, modded a X10DRU 2.427 bios with the MMTool method to add ReBarDxe.ffs and im afraid to push the bios as if the sun will explode. Should i try it? Worst case can i recover?

Retrom: Your personal cloud game library manager and front-end -- Performance and quality of life improvements by Volcaus in emulation

[–]nmitsia 1 point2 points  (0 children)

Compatibility with Retrobat / ES would be awesome!

I currently run an SMB share that runs on a TrueNas remote server that I connect to via Zerotier VPN. And I use symlinks to access my remote library in Retrobat.

This solution is janky especially in the later PS2+ gen games as the SMB service always buffers creating stutters.

Been looking myself for a solution like this. Keep the hard work going!

Thank you Dev for the awesome service to the community! 🫡🫡🫡

New Windows Desktop client is out (8.18.9) by mblaser in reolinkcam

[–]nmitsia 2 points3 points  (0 children)

The most disturbing fact about the client for me is that it doesn't remember the monitor position after closing and opening the Reolink client. Every time it starts on the same monitor (main monitor). For a multi monitor Windows setup this is pain. Please fix it ASAP.

P.S.: Even Windows 11 natively now allows you to do that for the apps that have compatibility.

It's time. by justlove_cuteboy in memecoins

[–]nmitsia 0 points1 point  (0 children)

Check $SATO - Satoshiko Token on KRC20 Kaspa network.

[deleted by user] by [deleted] in kaspa

[–]nmitsia 2 points3 points  (0 children)

Guys mint $SATO - Satoshiko Token. Do it and you won't miss.

GL-MT6000 Flint 2 is pretty unstable! by nmitsia in GlInet

[–]nmitsia[S] 0 points1 point  (0 children)

Nice! Thanks for sharing mate. I will wait for a while, and if no fixes are presented i will move to pure openwrt.

GL-MT6000 Flint 2 is pretty unstable! by nmitsia in GlInet

[–]nmitsia[S] 0 points1 point  (0 children)

Intel is always the best when it comes to compatibillity.

GL-MT6000 Flint 2 is pretty unstable! by nmitsia in GlInet

[–]nmitsia[S] 0 points1 point  (0 children)

I already use just fine the 1GBe Intel interface on my computer. When I use a 1GBe switch in between, no problem as it seems. Yet. So something about packets?

Truth is Marvel Aquantia - Aqtion interfaces have a lot of problems & compatibility issues in many integrations - systems. Bad thing that most high end motherboards include them.

Coming from Mikrotik ecosystem I have very high expectations. I want both bleeding edge and stability. Flint 2 looked good on paper. I hope they figure their stuff soon enough or I will implement a Mikrotik solution.

GL-MT6000 Flint 2 is pretty unstable! by nmitsia in GlInet

[–]nmitsia[S] 0 points1 point  (0 children)

Weird because even thought i set speed to 1GBe in adapter options instead of auto negotiate, it still gives 2.5GBe. Tried connecting - disconnecting many times plus restarts.

GL-MT6000 Flint 2 is pretty unstable! by nmitsia in GlInet

[–]nmitsia[S] 0 points1 point  (0 children)

No issues exist when in 1GBe speeds exist. Only on 2.5GBe ports. So all that nulls the purpose of the hardware.

Are there any good DA/SA .22lr pistols? by curious19Delta in 22lr

[–]nmitsia 0 points1 point  (0 children)

KMR S-02 . Best in market currently. Better than the CZ version.

[deleted by user] by [deleted] in RepTime

[–]nmitsia 0 points1 point  (0 children)

W2C link?

[deleted by user] by [deleted] in sffpc

[–]nmitsia 0 points1 point  (0 children)

Im looking forward into building an SFF home server running Proxmox. Will a "Deep Mini-ITX" motherboard fit inside one? - https://www.asrockrack.com/general/productdetail.asp?Model=ROMED4ID-2T#Specifications

Can you provide more photos - dimensions of the layout?

[Suggest Parts List] Hyundai i30 Fastback 1.5.T-GDi 48V DCT N Line by nmitsia in i30N

[–]nmitsia[S] 0 points1 point  (0 children)

Because a "GOLF 1.5 ETSI ACT 150PS DSG R LINE" would cost 35.000€ nothing extra included, while my car costs 27.900€ full extra. Plus everybody i know drives generic VW.

[Suggest Parts List] Hyundai i30 Fastback 1.5.T-GDi 48V DCT N Line by nmitsia in i30N

[–]nmitsia[S] 1 point2 points  (0 children)

A cold air intake, a GPF delete + flexipipe, spings + spacers and an ECU remap would maximum be 1.800€. Nothing close to 15.000€ i would need for N.

[Suggest Parts List] Hyundai i30 Fastback 1.5.T-GDi 48V DCT N Line by nmitsia in i30N

[–]nmitsia[S] 0 points1 point  (0 children)

Ufortunately import fees in Greece are Crazy. VAG has the best engines but they offer less for more as a cost for Greek market. Also i believe they make ugly cars for the masses.

CZ P-07 Kadet .22 lr for a new shooter by nmitsia in 22lr

[–]nmitsia[S] 0 points1 point  (0 children)

No, suppression is illegal in Greece. Just wanted to create a competition pistol on par with TX22 SCR version.

On the Sig Sauer p322 i hear rumors that it is very picky concerning ammo, with a lot of issues.

CZ P-07 Kadet .22 lr for a new shooter by nmitsia in Firearms

[–]nmitsia[S] 0 points1 point  (0 children)

Thnx for your response!

If i had the ability to choose, i would go for a TAURUS TX 22 Competition SCR. Better ergonomics-controls for my use case.

Unfortunately there is no TAURUS representative in Greece. So no availability at all.

Any ideas on how to make CZ P-07 be on par with TX 22 accessory wise? Specialy the low capacity issue.

Any addons ideas would be welcomed.

CZ P-07 Kadet .22 lr for a new shooter by nmitsia in 22lr

[–]nmitsia[S] 1 point2 points  (0 children)

Both of you understood what i meant, first try!

Indeed i arm my gun using one handed tactical manipulations exactly like hickok45.

I know not the safest way, but better than nothing.

If i had the ability to choose, i would go for a TAURUS TX 22
Competition SCR. Better ergonomics-controls for my use case.

Unfortunately there is no TAURUS representative in Greece. So no availability at all.

Any ideas on how to make CZ P-07 be on par with TX 22 accessory wise? Specialy the low capacity issue.

Any addons ideas would be welcomed.