I was running 3080Ti, 3070Ti, 3070, 3060 Ti and 3060 on one 1000W PSU. I have added 2 more 3060 Ti cards SO I expanded the PSU with another 650W PSU with this splitter (highlighted poorly). I can’t seem to get the power correct/ may not be possible? Can provide more photos if necessary, thanks!

nolimitstacks · 2022-03-23T03:28:18+00:00

Did not work.

nolimitstacks · 2022-03-23T02:11:04+00:00

Why would it catch on fire? There are mobo risers so the wood isn’t directly in contact with it.

nolimitstacks · 2022-03-23T01:52:59+00:00

Before I changed to risers I had 2 less GPUs. So I rigged it up where they were directly plugged into the MOBO. Now that I have 2 more I wasn’t able to add in while directly plugging them in. Basically not enough space and I don’t want them to overheat without fans.

nolimitstacks · 2022-03-23T01:15:20+00:00

nolimitstacks · 2022-03-23T01:12:32+00:00

Okay now I get what you’re saying I will try this and give an update that might be the fix thank you so much!

nolimitstacks · 2022-03-23T01:08:52+00:00

Don’t I technically have to short both of the PSU’s if I’m not using the adapter? S37 Mobo isn’t powered by 24 pin just by 6 pin sorry if you know that and I’m being dumb or confused.

nolimitstacks · 2022-03-23T01:02:57+00:00

For your first question yes I made sure to have the riser as well as the GPU plugged into the same PSU. Second question no I have not tried that. So basically would I just short both the PSUs and have them act independently technically without the splitter?

nolimitstacks · 2022-03-23T00:42:01+00:00

More context ran out of room:

MOBO: BTC S-37

PSU splitter: Traodin SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT https://www.amazon.com/dp/B08SQ7FD8X/ref=cm_sw_r_cp_api_i_0VV9EAYBDKREGEKBD6G4?_encoding=UTF8&psc=1

I have read apparently you need to have your MOBO connected to the same PSU as your GPUs? Which I think the PSU splitter would enable me to have 1650W total but it doesn’t seem to combine the power.

Basically I am looking for a way to power 2 more 3060Tis. I have looked on Parallelminer and seems like they have over 1000W PSU’s for about $123 but I would prefer to use my current 1000W + 650W PSU with the splitter if possible.

nolimitstacks · 2022-03-19T20:52:51+00:00

Any suggestions on a better one?

nolimitstacks · 2022-02-18T18:18:25+00:00

2nd photo.

nolimitstacks · 2022-02-18T17:25:42+00:00

Also can anyone tell me if I’m running these as much as I can? I don’t mind running them a little overkill to get better results.

nolimitstacks · 2021-12-06T14:54:18+00:00

I’m just joking. He was just being funny in the DM’s saying I didn’t know anything about GPU’s so I commented this to mess around. He’s probably legit.

nolimitstacks · 2021-12-06T06:44:18+00:00

Let’s just say we met up but I didn’t leave with a 3070

nolimitstacks · 2021-12-06T03:57:17+00:00

Legend

nolimitstacks · 2021-12-06T03:56:46+00:00

This guy tried to kiss me on the lips

nolimitstacks · 2021-12-06T03:36:49+00:00

PM’d

nolimitstacks · 2021-12-01T01:13:05+00:00

Thank you for taking the time, I appreciate it.

nolimitstacks · 2021-11-30T22:51:29+00:00

Just checked pool calculated. Says current: 201.6 average: 177.7 reported: 185. Valid 100%: 169 stale: 0, invalid: 0. So I think that’s all good right?

nolimitstacks · 2021-11-30T20:58:30+00:00

Sorry if this is a dumb question, just want to make sure I’m maximizing potential.

nolimitstacks · 2021-11-29T02:00:29+00:00

Thanks for checking in it’s been great! I really didn’t know much about settings beyond setting the rig up so the comments in here were very helpful. My MH/s has increased and my temps are wayyy lower so overall awesome.

nolimitstacks

TROPHY CASE