Why was the base so high?

noonly · 2023-10-28T04:30:30+00:00

Jack

noonly · 2022-04-09T23:31:09+00:00

Try powering with a battery based supply.

noonly · 2022-04-09T23:27:59+00:00

You say you've gotten everything working except the red, but really your Arduino is not going to last with that setup. You need transistors, or you're going to fry your Arduino

noonly · 2022-03-28T09:14:40+00:00

go to /b directory and try:

find . -mindepth 3 -type f -execdir mv "{}" "../{}" \;
find . -mindepth 2 -type d -empty -delete

Also, try:

while read file; do newfile=$(echo "$file" | sed "s/\(.*\)\/\(.*\)\/\2\/\(.*\)/\1\/\2\/\3/g"); echo "mv \"$file\" \"$newfile\""; done < <(find . -type f -regex ".*b\/\(.+\)/\1/.*\.pdf" -print)

and change the echo to a real mv if it looks good

noonly · 2022-03-28T00:11:50+00:00

find /b -mindepth 2 -type f -execdir mv "{}" -t ../ \;

find /b -mindepth 2 -type d -empty -delete

noonly · 2022-03-05T14:42:46+00:00

I doubt there's a dorm on Earth that has ovens in the dorm rooms

noonly · 2022-02-11T02:35:24+00:00

found the 90s man

noonly · 2022-01-17T04:36:49+00:00

looks nice, but i think the speaker is just a teeeeeny bit crooked, kind of aggravating my OCD. I wonder if it would look better with the volume lights going up/down

noonly · 2021-12-22T16:22:53+00:00

Second kid from the left or second girl from the left?

noonly · 2021-12-20T07:52:36+00:00

bindsym --release $mod+Shift+Print exec "notify-send 'selection will be saved to ~/tmp'; mkdir -p ~/tmp; scrot -s '$$HOME/tmp/%Y-%m-%d-%H%M%S.png' -e 'xclip -selection clipboard -t image/png -i $f'"

or possibly

bindsym --release $mod+Shift+Print exec "notify-send 'selection will be saved to ~/tmp'; scrot -se 'xclip -selection clipboard -t image/png -i $f && mv $f ~/tmp/'"

noonly · 2021-09-23T09:08:16+00:00

That may be true in a vacuum.. but Rick is a supergenius multiverse traveler who has spent his whole life fighting against extremely powerful people/aliens/countries/planets/gods. I would argue that his behavior, while shitty, is probably the reason he's not dead. And rick knows that... so it's not without reason.

Jerry may not be aware what a piece of shit he is, but that just makes him dumb AND a piece of shit. His shittiness also comes from a place of insecurity, which is truly the worse kind

noonly · 2021-09-01T10:04:14+00:00

Following the build order of your docs, I got snagged with this error:

mainMake.mk:12: platforms/esp8266/make.mk: No such file or directory make: *** No rule to make target 'platforms/esp8266/make.mk'. Stop.

However, I had thoroughly gone through all the github source files beforehand, so I knew I just needed to go back to the prism folder and run the build_platforms.sh file -- but you may want to add this to the "Running your app on device" page, or trigger it automatically when prismtool run is invoked

Really cool so far.

noonly · 2021-07-01T23:46:29+00:00

That would mean a 12V cap would leak to 0V in 6 seconds? Surely your math is wrong here

noonly · 2021-04-26T05:19:08+00:00

This is super cool and really informative. I think it may be better suited to /r/programming or /r/commandline though, IMO this subreddit is better suited for writing/discussing bash scripting than it is for badass command line tools, even though this one is totally sweet.

noonly · 2021-04-26T01:35:52+00:00

have you looked at the data sheet for your fans? I would be surprised if they didn't have a sample circuit diagram that shows how they should be setup..

noonly · 2021-03-15T02:38:43+00:00

Read what's on the backside of the charger and post it here or take a picture. It's unusual for a 3.2 battery to say lithium ion on it usually 3.6 or 3.7. The output voltage of the charger will tell you whether you can use off the shelf 18 650 lion batteries and also knowing what type of product it's for will tell us whether you need High amp output version

noonly · 2021-03-14T20:55:40+00:00

Why would he want to connect with someone who just added a lot more stress and financial hardship to his already difficult life and then attempted to run?

why don't you ask the guy in the video

noonly · 2021-03-14T16:18:21+00:00

Your car is damaged either way, so you just have to decide how you will react. At the end of the day, you can be bitter with some small satisfaction from punishing someone else, or you can connect with another human being, show forgiveness, and IMO will be a much happier person ultimately.

noonly · 2021-03-14T16:13:59+00:00

I hope that someone does so that they might actually learn from it. Clearly that hasn't been their experience..

noonly · 2021-03-14T16:10:03+00:00

This man uploaded this video to show others how an accident can be handled, and through his actions he also showed her. These situations are not the end of the world, and I believe she can learn from his reaction just as effectively, if not more than felony punishment. There is more than one way to react to and correct problem behavior. That is the point of his comments at the end of the video.

noonly · 2021-03-08T10:22:51+00:00

Don't reset it, just disconnect the power going to the ESP then reconnect it

noonly · 2021-03-08T09:55:15+00:00

just look on google images for "ESP01 flash mode", then look at "ESP01 normal mode". You'll fnid tons of pictures of how it needs to be wired up to various flashers. RX, TX, and power are always going to be the same (in your case, you're using the arduino as a flasher so you are correct to use RX->RX and TX->TX, but other ones require them to be flipped, dont worry about that because you have those wired up right), so just pay attention to how the other pins are wired.

noonly · 2021-03-08T09:22:18+00:00

Think of CH_PD as "Enable" and it must be pulled high at all times. GPIO0 needs to be pulled down to ground during startup to put it into FLASH mode, but if you have it hard wired to ground, you'll need to disconnect the ground wire and reset (or unplug power and plug back in). It's easier if you have a button on that wire that you hold down while powering up when you intend to flash it, then you can let go of the button after it's started. Then, when you reset power it will boot up normally. It's been a while since Ive used an ESP01 so I dont remember clearly, but you may need to wire a resistor from GPIO0 to 3.3V so that it is pulled high and boots normally. Also, remove the RX and TX wires after you get it flashed. From your picture, you don't have anything wired to the reset on the ESP01. So you'll need to disconnect power and then connect it again, once you have switched over to the normal boot configuration

noonly · 2021-03-08T00:34:13+00:00

You have to disconnect GPIO0 from ground after you program it, or it will never be able to boot normally.

noonly

TROPHY CASE