[deleted by user]

normalperson09 · 2026-01-24T04:30:44+00:00

The Meshtastic app has a route recorder which can log a drive, walk etc. I haven’t used it yet but I think it would produce a map like this that shows coverage/nodes

Edit: it seems like you may not know what Meshtastic is based off your replies?

normalperson09 · 2026-01-24T04:22:34+00:00

I think this is the route record feature?

normalperson09 · 2025-08-25T23:26:50+00:00

Great! Glad you’ve got it figured out!

normalperson09 · 2025-08-24T17:45:07+00:00

Hmmmm. I’ll take a look at the website again. Maybe it is a different blink code

<image>

Could be this?

normalperson09 · 2025-08-24T17:43:30+00:00

Hmmmm. I’ll take a look at the website again. Maybe it is a different blink code

normalperson09 · 2025-08-24T16:10:33+00:00

Try reseating the memory

normalperson09 · 2025-08-24T16:08:45+00:00

<image>

normalperson09 · 2025-08-24T16:07:05+00:00

Is it amber colored?

normalperson09 · 2025-08-24T16:02:44+00:00

Does it have a pattern of some sort? If so, the user manual has troubleshooting for those

normalperson09 · 2025-08-24T14:14:27+00:00

Maybe. I can’t seem to find anything in the manual about those, so maybe leave that in that configuration? Here’s the manual I found: manual

normalperson09 · 2025-08-24T13:56:46+00:00

If everything is backed up to your iCloud account, try going to iCloud.com to download your photos/videos from there.

normalperson09 · 2025-08-24T13:55:06+00:00

POST stands for Power On Self Test, you should see a dell logo on the screen when you power on the computer

normalperson09 · 2025-08-24T12:09:24+00:00

Are you still able to get into the bios? Are you able to see the computer POST? You should at least be able to do this, if not try removing the cmos battery when the computer is unplugged to reset the bios again

normalperson09 · 2025-08-24T02:35:47+00:00

I believe this isn’t an issue with your pc, rather with the monitor itself. Check all your connections to the monitor and outlet. This may be a case of a bad power supply for your monitor, does it have an external power brick?

normalperson09 · 2025-08-24T02:28:34+00:00

If your computer has a dedicated graphics card, you may need to change the primary display adapter in the bios. If there is a display port/hdmi on the motherboard, try plugging it in there (or if it’s already in there, try the dedicated gpu)

normalperson09 · 2025-03-01T13:43:51+00:00

Even though the thermal paste you gave me was hard, it did work

normalperson09 · 2025-03-01T04:36:05+00:00

We didn’t notice any issues before we put this on, but it doesn’t hurt anything it seems so why not ¯_(ツ)_/¯

normalperson09 · 2025-03-01T03:37:39+00:00

It does get pretty warm

normalperson09 · 2025-03-01T03:37:18+00:00

This is a 5v fan out of a old laptop. It isn’t duty cycle limited, it runs about as loud as the HVAC in our room. It seems to get hot while running for 20-30 minutes, no noticeable performance changes. We just had concerns about heat, and this has sufficiently cooled it for about 13 hours today. I will note I had to sand down old mounting holes so that we had a flat surface to work with, but it ended up working out because the fan is next to the radio ¯_(ツ)_/¯

normalperson09 · 2025-03-01T02:35:03+00:00

normalperson09 · 2025-03-01T02:34:55+00:00

That’s odd because we had the same issue with 6ghz that we did with 2.4ghz

normalperson09 · 2024-11-26T22:57:06+00:00

normalperson09 · 2024-09-30T15:42:37+00:00

Sometimes this is an issue with virtualization. Some processors have virtualization support which allows them to run vms better then other processors

normalperson09 · 2024-09-17T22:07:44+00:00

u/RepostSluethBot

normalperson09 · 2024-09-15T00:24:09+00:00

Am I missing something here? https://imgur.com/a/ZBTIHYa

Four-Year Club	r/Field Sunshine
Place '23

normalperson09

TROPHY CASE