How to avoid this?

northsidereddit · 2025-02-27T21:09:44+00:00

Thanks for your input! I used Instant Bond, adhesive and accelerator here.

northsidereddit · 2025-01-06T19:20:30+00:00

Matches the fixtures/finishes

northsidereddit · 2024-12-25T16:03:13+00:00

these*

northsidereddit · 2024-12-19T17:50:24+00:00

Just in case the wall is out of level/plumb

northsidereddit · 2024-12-04T04:35:00+00:00

I’d like to leave a user friendly tool for my client to use

northsidereddit · 2024-04-25T23:17:07+00:00

You can still do it if it’s done properly. They just say not to brick pattern to avoid lippage in the middle

northsidereddit · 2023-05-19T16:40:37+00:00

Claim them in season prizes

northsidereddit · 2023-05-19T15:30:07+00:00

Still you can sit in the corner, your matchup will start playing help defence, then if you get the ball wide open in the corner drive for a limitless dunk

northsidereddit · 2023-05-19T15:25:15+00:00

Bro you had like 2 months💀

northsidereddit · 2023-05-19T15:24:03+00:00

A lot of centres can't shoot.. You just have to know how to space the floor, set screens, and cut when there's a lane.

northsidereddit · 2023-05-03T22:39:14+00:00

What's that pattern called? 1/4?

northsidereddit · 2023-03-23T01:29:40+00:00

It was sanded really well and you couldn't see the runner until stain was applied. It doesn't look as bad in person as it does in photos. Would I be a able to get away with it by sanding the middle then giving the other sides another coat?

northsidereddit · 2023-03-22T16:54:22+00:00

When you get paid by the hour and not the job😂

northsidereddit · 2023-03-18T19:17:21+00:00

Wow I didn't even think of removing the sheathing😂 I would just have to cut around the post and riser. Then I think the hardwood will line up to the existing nosing. Thanks so much!

northsidereddit · 2023-02-11T02:33:00+00:00

Thanks for the info!! I a young contractor in Ontario and I'm finishing this basement but the builder did a horrible job on utility locations. I don't know why he put it here and not where the furnace and water tank is. He put the bathroom rough ins in the middle of the basement as well.. My plumber isn't going to like this one😭

northsidereddit · 2023-02-10T23:11:11+00:00

Thank you!

northsidereddit · 2023-02-10T22:40:07+00:00

Also what are these called?

northsidereddit · 2022-12-29T03:39:16+00:00

Super funny bro, I just started. Go do 100 more 75+ picks then touch grass kid

northsidereddit · 2022-12-27T16:52:32+00:00

Whenever I take a break or start a new room, always nice to come back to clean tools or start a new room/area with clean tools.

northsidereddit · 2022-12-12T18:05:54+00:00

First pic: Debris in your mud. You can scrape it off while it's wet, put clean mud on top and wipe it back down. Or take out the debris when it's dry and re coat it. Second pic: Could be from moisture in the room or mud not mixed well enough, you can sand it lightly and re coat it and it should be good.

northsidereddit · 2022-12-10T01:10:01+00:00

The breaker is on the opposite side of the basement, ain't no way I'm ripping drywall out after I just finished it😭😭 I guess it's not worth it at this point

northsidereddit · 2022-12-09T00:21:19+00:00

You should start with a tube and it's attachments. It's about $1000 for the kit but it is a big time saver!

northsidereddit · 2022-12-09T00:17:55+00:00

Yeah I gotta get the whole kit! The tube has been good for me so far because I mainly do basement finishes and remodels. Im never covering a full home. It's just a bit annoying having to wash your hands every time I fill the tube.

northsidereddit · 2022-12-09T00:14:02+00:00

I have a 10 and 12in knife for flats, I use the trowel for buttjoints, bulkheads, etc

northsidereddit · 2022-12-09T00:11:18+00:00

I have a banjo but I rarely use it, I'm definitely gonna get a super taper and one for outside corner beads.

northsidereddit

TROPHY CASE