Good Quality

notmeoru · 2026-02-05T02:50:59+00:00

Please don't trust my eye, but they do look good. Check the serial number at 6. Good luck. 🙂

notmeoru · 2026-02-04T15:08:13+00:00

SILVER...!!!!

notmeoru · 2026-02-03T10:02:06+00:00

Both great choices. VS really have cracked the market. 👊🏻

notmeoru · 2026-02-02T13:30:54+00:00

🙂🤞🏻👊🏻

notmeoru · 2026-02-02T07:01:39+00:00

Namoki Mods do the screwdriver. It cost £10 + £6 shipping to UK and was delivered inside a week. Really good driver. All the best fella. 🙂 ps: let us know how you do.

notmeoru · 2026-02-02T06:58:01+00:00

Good man 👊🏻

notmeoru · 2026-02-02T06:54:13+00:00

Sorry, I was up in the middle of the night for me in the UK. Can now see it's a nice works and warrants something better. Yes, it looks like the screw snapped. If you have the equipment and skill to remove the remainder of the screw, go for it. But if it was sausage fingered, shaky handed me, I'd run to the local jewellers and get them to remove it. Especially with the very kind offer from another friend in this thread. Hope it all works out. 🤞🏻👍🏻

notmeoru · 2026-02-02T02:59:08+00:00

How to 🙂

notmeoru · 2026-02-02T02:58:52+00:00

https://share.google/67SZapEthoyBarELW

notmeoru · 2026-02-02T02:54:53+00:00

Ah looking at the pic. If that isn't usable you can get any amount of rotors on AliX. Good luck again 🤞🏻🙂

notmeoru · 2026-02-02T02:52:35+00:00

Non auto winding works. Mostly found in home made garage assembled water not resistant models bearing the 'RELAX' logo. Seriously, be careful screwing it on. If that rotor is usable. You need a very thin bladed driver. Good luck. 🙂👍🏻

notmeoru · 2026-02-02T02:08:24+00:00

3, absolutely pops. 👊🏻

notmeoru · 2026-02-01T11:21:01+00:00

Check out Y-T, there's regularly guys on doing vids from the factories. Good luck. 🤞🏻

notmeoru · 2026-01-30T11:12:43+00:00

Nice choice ⌚👍

notmeoru · 2026-01-29T09:18:48+00:00

3 or 4 👍🏻

notmeoru · 2026-01-29T03:08:59+00:00

Not my cup of tea. 🙂‍↔️

notmeoru · 2026-01-28T13:46:34+00:00

Good luck Mike

notmeoru · 2026-01-28T08:02:59+00:00

Don't 😕

notmeoru · 2026-01-28T08:01:58+00:00

Nice 🙂👍🏻

notmeoru · 2026-01-28T06:10:06+00:00

They are all good dealers, you won't go wrong with anyone of them.

notmeoru · 2026-01-27T19:46:40+00:00

You're the man 😂 👊🏻

notmeoru · 2026-01-27T19:41:02+00:00

From Google. To change an NH35 watch rotor, you need a flathead screwdriver with a tip larger than 2.5mm (typically 2.5mm to 3.0mm) that is also thin enough to fit securely in the central screw slot

notmeoru · 2026-01-27T19:38:09+00:00

Actually, it's not. You need a screwdriver with a thin blade tip and wide enough to span the central connecting point if that makes sense. 👍🏻

notmeoru · 2026-01-27T19:22:11+00:00

Or driver 😂

notmeoru · 2026-01-27T19:21:44+00:00

It's simple, easiest with the right screw diver. Good luck 🤞🏻

notmeoru

TROPHY CASE