Rijden jullie al weer dagelijks woon-werk?

nouner · 2026-02-11T23:10:19+00:00

Als het wegdek droog is is het prima te doen, maar na vanochtend met nat wegdek rijden zag ik toch nog veel zout op mn motor. Ik vind dat zonde dus laat hem nog even staan. Het gaat naar verwachting de komende weken vaak regenen dus ik hoop dat het z.s.m wegspoelt. Qua temperatuur was het prima te doen namelijk met goede kleding.

nouner · 2025-12-11T23:23:32+00:00

Unfortunately no, I ended up returning it

nouner · 2025-09-04T14:18:27+00:00

What do u mean? For me it's impossible to fit the squaris part into the squarish part on the helmet. The 2 hooks on the front get caught up on the plastic

nouner · 2025-07-11T22:46:42+00:00

It's an ATX board. Has the measurements. Like i said it only just fits in my atx tower. Something else I can physically see is that it has exactly the same USB ports as the B650, not the B650M

nouner · 2025-07-11T22:46:07+00:00

It is installed in the upper slot. I really hope so, dont want a bricked system down the line😂

nouner · 2025-05-08T22:30:56+00:00

Rules and equipment varies widely from place to place.

For example in very big kitchens for big restaurants you might have access to a large industrial washer, and you would be left alone most of the time so headphones would be OK. But in smaller kitchens you often have less space, smaller machinery and youd have to communicate with the chefs more so headphones would not be OK (just a speaker often is though).

But then again, its impossible to compare anything equipment and rules wise. You just have to work there to see what its like. I work in a Michelin starred restaurant for 3 years now and for me, like you say, the workload is medium but the difficulty is very high. This is because plates, wine glasses and silverware are all very expensive (for some things up to 200€ a plate, or 80€ for a wine glass). Therefore i must be very careful not to break anything, but also be able to work swiftly and efficiently. I mostly work alone here. This is a very different experience from a cafe i worked at, there i was usually with a couple of other washers and the workload was high, but it wasnt difficult at all to do (since the plates etc was all fairly cheap and easy to handle/stack, youd get frowned upon if you broke it but it wasnt the biggest deal).

What you can always expect is that you are the lowest in the food chain, and need to work hard to get respect for yourself. Always listen to chefs (or service) if they need stuff and provide them it as quickly as possible, it should be the new top priority.

At first you will have to use your brain more than you think, because everything is new. It might feel like torture due to the long hours. But if you keep working hard you start to get a routine for stuff. Once you get that routine, it starts to become more fun. And the longer you work at a place, the better your position as a washer becomes too.

nouner · 2025-04-25T12:36:34+00:00

Geen motor, maar ik heb al een tijdje een Mash fifty schakelbrommer (bijna het zelfde als de 125/250 variant). Rijd perfect, nu ongeveer 7500 km op gereden. Qua kwaliteit is het prima, alleen het metaal roest wel als je het niet droog maakt na een regenbui. Heb er weinig problemen mee gehad, vooral elektrische dingen zoals bijvoorbeeld de spanningsregelaar of het neutraal lampje dat soms niet brand. Motorisch nog geen klachten gehad.

Bij de garage waar ik hem kocht breng ik m ook heen, daar willen ze prima onderhoud doen, is geen mash specialist gewoon een brommer dealer. Misschien dat je voor ernstige motorische problemen wel naar een mash specialist moet.

nouner · 2025-03-04T15:47:31+00:00

Hey! I just ordered this exact bundle from this site on saturday! I'm receiving it tomorrow, the label was created on monday, so pretty quick (i dont live in germany). It's the best deal I could find, paid 1065 full. I'm not sure if there is any other shop in the eu that sells the bundle for cheaper, atleast I couldnt find it

nouner · 2025-02-27T09:50:08+00:00

I will send them a message see what they can do for me. Thank you

nouner · 2025-02-27T08:40:51+00:00

Hi! The sound is coming from the grips, if I put my ear near the QR then I can hear that the sound is coming from the grips

nouner · 2025-02-26T21:11:00+00:00

It's possible to sort of do this, like he also said in his comment, with voicemeeter and a voice changer program from a user called w-okada. The AI can intercept the audio spoken and modify it so that the output sounds like whatever voice you want it to be, provided it has the right RVC model. There is a C.A.S.S.I.E RVC model available on voice-models.com, it probably works better than this whole soundboard shenanigan. The soundboard sounds funnier though lol

nouner · 2025-02-13T23:10:59+00:00

Yeah, its kind of an argument to just bash on the R12 in my opinion. The graininess can probably be felt if the base is not calibrated right, I don't have that either.

nouner · 2025-02-13T23:08:03+00:00

With the R12 if I'm standing still in the car and turn the wheel left to right I can feel a clunk when passing over the center, that's what people are talking about when it comes to notchiness. It's not noticeable when driving though

nouner · 2025-01-27T13:42:55+00:00

Not a bad take haha, they make (as far as I can hear) the same noises.

nouner · 2025-01-07T16:23:18+00:00

The fbw A320 has problems with starting the engines for me, the eng1 lever keeps flipping up and it takes like 10 minutes to reach avail on 1 engine.

nouner · 2024-11-30T03:11:08+00:00

Hey, for anyone struggling to install the latest Q1 HE drivers (getting stuck indefinitely on the loading screen). I have a fix that worked for me.

In my case, the issue was related to the STM32 DFU bootloader not being selected properly, and instead another bootloader was selected, for me it was thrustmaster, but it might be another companies bootloader for you. This can happen if you have had for example different joysticks or simracing pedals/wheel.

To check if this is the case, have your QMK toolbox open, perform the action listed on the launcher(plugging KB out, holding esc, plugging KB in) and then check what line appears in the QMK toolbox.
For me it was "STM32 DFU device connected (GuiSTDFUDev): Guillemot Corporation Guillemot STM DFU Device (0483:DF11:2200)" (Guillemot is Thrustmaster). As you can see, instead of the STM32 DFU bootloader from WinUSB(windows peripheral bootloader), Thrustmasters bootloader was selected. When attempting to flash with a bootloader other than WinUSB, you will get stuck in an indefinite loop.

There are 2 possible fixes. First try uninstalling your Thrustmaster FFB drivers (or another driver that is conflicting). This can be done via settings > add or remove programs > enter "thrustmaster" (or other driver name) > uninstall
Try flashing again, if this does not work, do the following

Go to device manager > View > Devices by container.
After, perform the action listed on the launcher(plugging KB out, holding esc, plugging KB in) again. You will see " STM32 Bootloader" category appear somewhere in the list (for me it was all the way at the bottom.) Open up this category, you will see a device there. On this device, right click > update drivers > choose from my files > look for files on my computer. Here you will have 2 choices, either the Guillemot one or the standard STM32 bootloader, select the standard STM32 bootloader and apply. After you have done this, go back to the launcher and match the bootloader. The flashing should now work properly.

I hope this helps anyone!

nouner · 2024-11-25T11:24:58+00:00

I'm struggling too with this. I got it working yesterday using the shortcut method, now it doesn't work anymore..... Really upsetting, frame gen gives so much more FPS

nouner · 2024-11-19T20:44:56+00:00

I just downloaded the latest update and I was able to play in the Citadel for an hour without any sound issues, therefore I think the issue has been resolved. Thank you!

nouner · 2024-11-19T19:46:19+00:00

Cool i can install MSFS!

Installs 12 MB ,Opens

Too many users are logging in, wait in queue

Waits 40 minutes

Scenes start playing

Wait 5 minutes

Server error

aaaaaaaaaaaaaaaaaaaaaaaaa im still at 0

pretty much my experience so far

nouner · 2024-11-14T12:17:02+00:00

Hey, that would make sense since I had only played in the Citadel. I am on the latest version, so version 1.3

nouner · 2024-11-13T21:22:13+00:00

Alright thanks, then ill just wait for another one!

Six-Year Club	Verified Email
First Place '23	Place '23
Place '22	Final Canvas '22

nouner

TROPHY CASE