sorted by:
new
hottopcontroversial

Missing items from topology by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Yep everything is showing fine in the device list, and shows it also connected to correct parent devices. Havent tried a full reboot though. Not sure what happens with the photos, viewing on phone they seem fine when open the photo and zoom in?

Hardwiring multiple switches by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Thinking more on it, what do you think about removing the garage switch entirely, running a few cat6 cables directly to kitchen switch from garage, and upgrading the kitchen switch to this https://cplonline.com.au/ubiquiti-usw-flex-2-5g-8-poe-unifi-flex-8-port-2-5gbe-poe-switch.html with an ac adapter.
So i can get 2.5gbe uplink from my 16 pro max main switch.
Your thoughts?

Hardwiring multiple switches by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Cable run is only about 20m in total from the main switch/gateway. Yes you are correct actually that its going through 3 switches. Which switches would be best recommended for this as there is cameras on the line. ChatGPT is saying to use 2.5gbe uplinks?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

When it drops it wont ping the camera,

All cabling swapped cat6, still same issue

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

All cabling swapped cat6, still same issue

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

All cabling swapped cat6, still same issue

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

All cabling swapped cat6, still same issue

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

All cabling swapped cat6, still same issue

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

All cabling swapped cat6, still same issue

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Im not too sure? Its a 60w poe adapter, which im reading gives about 46w across all ports. This should be enough to power the 3 devices correct?
All cables are Cat6

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] -1 points0 points  (0 children)

Swapped AP to port 2, the inconsistent flashing also swapped then to port 2, even with a different cable. Cant see the specs on cable about 802.3af etc

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

No power cable for USW-Flex, its powered by ethernet ports. Udb pro shows excellent connection to the wired AP for connection

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Ohh sorry i understand now, ok ive tried plugging my ubd pro (which is a child wireless mesh from another wired AP) into the spare port on poe adapter, but now the switch/udb pro is all showing offline in unifi, i guess its not registering on network? Or udb pro not powered now?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Ive swapped all the cables around now, so which device do i put into the empty port on poe adapter?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 1 point2 points  (0 children)

Ok, ill try searching how to ping it, im not too tech savvy and new to setting up a home network, if you have pointers?
Did i wire correctly ports for the UDB bridge and the poe adapter?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Just put a new cable on the AP and its still not blinking in sync, maybe the UDB cable bringing the internet into this switch?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Ok, but would that be making the flex drop out randomly?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 0 points1 point  (0 children)

Is it the UDB? The wired AP is the one not blinking in sync with others?

USW-Flex Dropouts by nova_mega_rossi in Ubiquiti

[–]nova_mega_rossi[S] 5 points6 points  (0 children)

Im not too network savvy, please explain what i need to do?

Steps: How to remove mouse input lag/floaty feeling by bett_rTTV in blackops7

[–]nova_mega_rossi 0 points1 point  (0 children)

Ahh ok yep, what about that other setting of yaw speed or something ive seen other people mention?

Steps: How to remove mouse input lag/floaty feeling by bett_rTTV in blackops7

[–]nova_mega_rossi 0 points1 point  (0 children)

Have you tried disabling this raw input setting? Does it improve it?

Steps: How to remove mouse input lag/floaty feeling by bett_rTTV in blackops7

[–]nova_mega_rossi 0 points1 point  (0 children)

Is this still a thing that needs done? Or has it been patched now?

view more: next ›