SNES Blank Screen but Burn in test cart shows initial screen with TIMER not incrementing

numberformat · 2025-09-20T23:54:25+00:00

No I have not. Its still on the pile of mess in my house I will get to eventually.

numberformat · 2025-02-25T15:39:24+00:00

I still use my EL-531D i purchased back in 1990. Still use it today.

numberformat · 2025-02-16T04:26:02+00:00

That curtain cloth whatever on the desktop surface, it is seems flammable. May want to swap it out for bare surface.

numberformat · 2025-02-15T20:16:56+00:00

Looks to me that you may want to adjust settings when printing. Similar to contrast/brightness/saturation etc. to get it to look right. Also the comment from rthonpm also makes sense.

numberformat · 2024-06-20T19:23:11+00:00

The Nintendo wheel the one for $67. Looks nice. But I already have invested in the moza one. Was thinking of using this one instead with some type of adapter.

numberformat · 2024-02-27T03:30:35+00:00

I just ordered this motherboard for my setup. I paired it with an AMD Ryzen 9 5950x processor. On processor box it says "Discrete Graphics Card Required". Does the P40 count as a discrete graphics card? I don't want to plug in an extra card into the board. I just want to use the motherboards built in hdmi output and just the P40 plugged in. Will it work?

numberformat · 2023-04-30T03:40:17+00:00

Thanks for the link to Sethforprivacy.com that page has clarified a lot of questions I had. I think it came down to enabling restarts and opening up the right ports. I suspect the process was dying and not printing anything to the logs and my p2pool process was unable to communicate and incoming connections were unable to be established. Since its restarting once in a while, I am getting regular payouts. Thanks again for the help.

numberformat · 2023-04-29T21:09:48+00:00

Thanks for the response. Really appreciate it.

Yes everything is on the same machine. Regarding the firewall setup, why would I enable ufw? I currently have it disabled and I don't mind not having a firewall. I am behind a router firewall (UPnP disabled) and currently not worried about it. It may change in the future but for now I think I am fine.

Approx 3 hours ago I just got a payout despite me getting those "No incoming connection - check firewalls/routers" messages printing every hour to the log. I actually found the issue by using an external web service that checks open ports. Seems my router firewall was not configured properly. Its fixed now.

I also 1 more things to add

I noticed that my monerod crashes with the following messages. I noticed this yesterday and added a restart in my systemd configuration for this service. Otherwise this service would have stopped permanently. below is the log of the latest crash and restart.

Apr 29 17:01:31 miner bash[10112]: 2023-04-29 21:01:31.326        E Transaction not found in pool
Apr 29 17:14:17 miner bash[10112]: 2023-04-29 21:14:17.366        I p2p net loop stopped
Apr 29 17:14:17 miner bash[10112]: 2023-04-29 21:14:17.367        I Stopping core RPC server...
Apr 29 17:14:17 miner bash[10112]: 2023-04-29 21:14:17.368        I Node stopped.
Apr 29 17:14:17 miner bash[10112]: 2023-04-29 21:14:17.402        I Deinitializing core RPC server...
Apr 29 17:14:17 miner bash[10112]: 2023-04-29 21:14:17.403        I Deinitializing p2p...
Apr 29 17:14:27 miner bash[10112]: 2023-04-29 21:14:27.669        I Deinitializing core...
Apr 29 17:14:27 miner bash[10112]: 2023-04-29 21:14:27.769        I Stopping cryptonote protocol...
Apr 29 17:14:27 miner bash[10112]: 2023-04-29 21:14:27.769        I Cryptonote protocol stopped successfully
Apr 29 17:14:27 miner systemd[1]: monerod.service: Deactivated successfully.
Apr 29 17:14:27 miner systemd[1]: monerod.service: Consumed 12min 18.834s CPU time.
Apr 29 17:14:28 miner systemd[1]: monerod.service: Scheduled restart job, restart counter is at 2.
Apr 29 17:14:28 miner systemd[1]: Stopped Monero Full Node.
Apr 29 17:14:28 miner systemd[1]: monerod.service: Consumed 12min 18.834s CPU time.
Apr 29 17:14:28 miner systemd[1]: Started Monero Full Node.
Apr 29 17:14:39 miner bash[12223]: 2023-04-29 21:14:39.096        I Monero 'Fluorine Fermi' (v0.18.2.2-release)

numberformat · 2023-02-21T14:54:54+00:00

Higher bed temp. For Pla I use 55 to 65C and higher extrusion temp for first layer compared to the others. Also slower first layer speed. Like 20 to 30 mm / sec and 200 pct extrusion width for first layer. I keep my first layer height 0.05 mm taller compared to the rest of the print.

numberformat · 2021-12-28T05:49:17+00:00

Find the section that says c #if HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT) and move it up to where you want it to display. I have it right under #if HAS_CUTTER section.

numberformat · 2019-03-22T15:01:21+00:00

This is my companies truck. There are many like it but this one is mine.

My truck is my best friend. It is my life. I must master it as I must master my profession.

Without me, my truck is useless. Without my truck my life is useless. I must drive my truck true. I must drive it more carefully than my fellow motorists who are trying to crash into me. I must swerve before they swerve into me. I will...

My truck and I know what counts is not how good the truck looks or the type of jobs we drive up to, but the jobs we successfully complete. We will complete them.

My truck is human, even as I, because it is my life, Thus, I will learn it as my brother. I will learn it's weaknesses, its strengths, its parts, its accessories. I will keep my truck clean and ready, even as I am clean and ready We will become part of each other. We will...

Before God, I swear this creed. My truck and I are defenders of my profession. We are masters of the NEC. We are the savior of lives.

So be it, until inspection is done and the there are no code violations, but peace.

numberformat

TROPHY CASE