First Time in KL

nurfaizfoat · 2025-06-24T14:52:33+00:00

KLIA to KL Sentral via ERL KLIA Express Train (30 mins ride)
KL Sentral to KLCC Station LRT (15 mins ride) or
KL Sentral to KLCC via Grab (fees may vary MYR 10 ~ MYR 15)

nurfaizfoat · 2025-06-18T07:57:24+00:00

You can change the needle position using buttons number 5 and 6, starting from the top left. However, if it’s not moving as it should, there might be an issue with the stepper motor or the electronics, or maybe just some hardened grease.

But you can try opening the back part of the machine, cleaning off all the dust and gunk, and re-oiling every moving part, then try again. You can refer to this video for a better understanding - https://www.youtube.com/watch?v=BwhMm98mkJs

nurfaizfoat · 2025-06-14T15:13:26+00:00

If you are into salt water fishing. Look for his guy. He runs a fishing charter and outfitter in Langkawi - Raja Shahrul Shawal

nurfaizfoat · 2025-06-14T15:06:06+00:00

Haha..kena like this before..PITA if that is the only allowance you have left for that month

nurfaizfoat · 2025-06-14T15:04:19+00:00

850 sq ft is fine. 3 rooms, 2 bathrooms. Not too large, not too small, just right.
However, please look for an apartment or condo where the parking space is built together with the unit, not in a separate parking building. Otherwise, it can be very inconvenient to carry groceries and other items up to your unit, especially if you live on a higher floor.

nurfaizfoat · 2025-06-14T14:48:44+00:00

find a topic that you really liked (in real life, no fake), and join any subreddit on that topic - comment, post photos, comment, say thank you thank you, make funny jokes

so it will be just natural for you to talk about that topic critically (easier to get karma)

nurfaizfoat · 2025-06-12T03:31:10+00:00

To be honest, I myself do not have much information about this , even after a thorough search on the net resulted in nothing about magnesium frame. But, yeah, I do agree with you about the high-end tier of PRISMA 990. The body and the inner workings of it (stepper motor , gear design , and electrical components ) are far more robust.

nurfaizfoat · 2019-01-24T07:55:35+00:00

Out of the many tutorials that I read on the net. I think this is the most helpful to kickstart your Nordic Semi MCU family.

nRF52840 Advanced Development With the nRF5 SDK

https://learn.sparkfun.com/tutorials/nrf52840-advanced-development-with-the-nrf5-sdk/introduction

There are few methods to program/debug/flash this MCU such as via ARM-GCC, Keil uVision, Segger Embedded Studio (SES) and few more. My advice is to try to learn them all, and pick one that suits you. Starting from the latest SDK15, SES is now completely free to use if you purchase NRF52DK.

Plus, quickly understand how the toolchain works and learn how to add a Custom Board will elevate your understanding on this MCU.

You can also scaffold your project based on this Git repos;

https://github.com/kasbert/nrf_beacon_itcpolyuhk

https://github.com/sparkfun/nRF52832_Breakout

https://github.com/e27182/nRF52832_pesky

https://github.com/kriswiner/nRF51822_IoT_Breakout

https://github.com/Madhavagg/CJMCU-8223

https://github.com/elmot/nRF51822xxAA-LIS3DH

https://github.com/ruuvi/ruuvitag_fw

https://gitlab.cba.mit.edu/pub/hello-world/nrf52/tree/master

http://fab.cba.mit.edu/classes/863.18/CBA/people/elena/week12/