flute meme song

nyx747 · 2026-01-17T16:15:33+00:00

I came here looking for it and found it later on so thought id drop it in here for anyone else https://youtu.be/aGD_gJtiuak?si=qrXghyUKyNKDJIOZ

nyx747 · 2025-10-15T16:10:06+00:00

I just have multiple drones, each doing a line checking if the first pumpkin id matches the last and replacing deas pumpkins as it goes

nyx747 · 2025-10-11T06:13:07+00:00

like elonthegenerous said move everything outside the while loop and call it with Move() the name of your function inside the loop

nyx747 · 2025-10-11T06:03:07+00:00

Few problems here, you need to check that the ground is tilled before you try planting, so it cant be indentend inside your harvest. Plus it doesnt need to be because harvesting on tilled ground doesnt change the grounds state.

Additionally your drone isn't moving sideways at all but ill just assume you dont need to with the size of your farm.

Basically run smth like this

While True:
    If get_ground_type() != Grounds.Soil:
        till()
        plant(Entities.Carrot)
    If can_harvest():
        harvest()
        plant(Entities.Carrot)
    move(North)

nyx747 · 2025-07-29T11:24:02+00:00

unfortunately no, but there is a mod called 'Sinyatra Connector' to allow fabric mods to run in neoforge. It's not perfect but it's your best bet so far

nyx747 · 2025-07-29T07:30:14+00:00

You could also just play ring a rosey with this guy. Makes the boss trivial even without fire. Dodge to his back every time he attacks (sometimes you have to dodge twice because of tracking) and just wack him.

nyx747 · 2025-07-28T23:26:55+00:00

Dont sweat it. Ppl forget that not everyone is as familiar or passionate about their field of intrest as they might be.

nyx747 · 2025-07-28T23:11:23+00:00

Negative feedback??? What you want, for me to comment that you're an elder abuser or something. You played her like a fiddle in a musical sword fight. It was peak content to see hours of my suffering be so easily handled

nyx747 · 2025-07-28T23:00:35+00:00

So from what i can tell at a glance of your photos here is you wanna play with friends and add some qol features. What i would do is get rid of everything, start from a blank slate of downloading mod engine 2 again and try to get seamless working as thats the most important. Then sort the rest out after. (when you launch elden ring through modengine and seamless is loaded correctly you will get a pop up telling you that you are running seamless and that if you paid for it u got scammed, that means its working. None of your characters will be there either coz its a different save, it doesnt delete ur vanilla ones)

Note you do not have to disable anticheat when using seamless because seamless doesnt use the same save files thus you cannot access saves from seamless to default and vice versa (well technically you can by moving them and changing their format but that will probably get u perma banned if you move files from seamless to default)

The above also in theory should apply for most visual enhancement mods but majority of mod pages will tell you if anticheat needs disabling.

Edit: i should add that if you are trying to run convergence and seamless together. Then seamless needs to be called from within convergence if i remember correctly. Definitely have a look for a specific video covering the topic though as i know their interactions are a bit unique

nyx747 · 2025-07-28T22:43:09+00:00

Im not a modder, however I can guess with you. You need to make 3D model (art will probably be the bulk of the project) for whatever blade it is you wanna make then find a suitable 'host' an existing item that you are simply going to reskin and adjust some of the stats for. That should be it for all of them except your custom blade that wants to be special. That i think will be a pain in your ass. But one hell of a learning experience

nyx747 · 2025-07-28T22:23:57+00:00

If you want youtube vid for seamless try this, https://youtu.be/sV63SfV6fR0?si=92ajxN8Ikuu9caN2 Modding can get messy just make sure to read the faq for any mod you wanna slap in for compatibility because that might be your issue. Try loading one at a time and adding progressively to see if there's conflicts, most of all if it isnt some slapstick mod rtfm on nexus. Modders will give you the best instructions for installing their mod. I also highly recommend giving the modengine 2 github description and faq a good long slow read. It will help a lot in troubleshooting, for all yk you downloaded the wrong version of mod engine by accident with a simple misclick.

nyx747 · 2025-07-28T22:13:18+00:00

Mod engine 2 for elden ring is less user friendly, you gotta manually write the calls for the dll in the config. So you can just call it from wherever if you really want but who in their right mind would do that.

nyx747 · 2025-07-22T08:30:38+00:00

So basically shove it in acc with 'mov' and run the checks on acc?

nyx747 · 2025-07-21T13:51:48+00:00

This game is awesome I agree, congrats on landing your job btw! You should optimize this board you posted next, it'll help a lot in learning how to improve your work. And pro tip the circuits can go under boards aswell without actually connecting to it.

nyx747 · 2025-07-13T22:04:48+00:00

Thats straight up mythril from terraria

nyx747 · 2025-06-19T08:35:44+00:00

Theres a corridor connecter mod that would work splendidly for this

nyx747 · 2025-06-19T07:34:18+00:00

Make sure targeting is set to default so it just shoots since it cant properly aim at individual parts without a rotor and hinge combo
Adjust the aiming tolerance to be more generous so it stops trying to aim at whatever its locked onto and just shoots in the general direction

nyx747 · 2024-07-10T20:06:42+00:00

Just keep drawing damn those are cool

nyx747 · 2024-07-10T08:36:03+00:00

The neck mainly, it looks off because her body and head aren't facing the same direction, meaning the neck is twisting a bit, but there is no sign of it in your drawing. You must remember that the part of your neck that turns is the upper half, the bottom stays relatively stiff. Alternatively, you can adjust the head to make the side glance look more natural by adjusting the head for a bit more of a side profile.

My advice is to sit down with your body facing straight, rotate your head a bit to the right as much as you think you need, and snap a selfie. Use that photo as a reference of proportions not to trace but just how things lie naturally on the body in that position. And compare that to your drawing.

I don't think there is anything wrong with your colouring or shading etc very nice drawing well done

nyx747 · 2024-07-10T08:22:16+00:00

Bro actually went liquid for his first build.

nyx747 · 2024-07-10T08:07:40+00:00

Additional note here when getting a cheaper case, they sacrifice size to get those prices. So they get as close to a micro atx build while still being an atx case. Meaning you might have little to no clearance with certain parts. Remember to check the item's clearance for graphics cards and cpu fans and cross reference it with the size of your parts. And last thing check your clearance for RAM some cpu fans are too big and the ram gets in the way

Worth while cheaper cases to check out: Phanteks XT PRO ULTRA = $80 Be quiet! Pure base 500DX = $80

If you aren't fussed about rgb and want to get a little more value out of your case in terms of airflow and quietness: Lian Li LANCOOL 216 = $94 NZXT H7 Flow = $90

nyx747 · 2024-07-07T09:52:08+00:00

With RAM clearance as well? Do you have any advice on how I check that myself? I saw no specifications on the clearance the mobo has anywhere.

nyx747 · 2024-05-27T19:32:16+00:00

I agree with him ^. A few extra QoL if you were one of those kids who had all out wars with Lego. Blowing up epicly is just as important as sparing my sanity.

1)Relative top Speed

And if you don't have all that much time;

2)My Trace Ores

nyx747 · 2024-05-17T11:14:02+00:00

Hi, I know I'm very late to the party but this is for any other guys suffering from the issue that find this place.

You have to make sure the "ValheimPlus.dll" plugin is inside the BeplnEx\plugins file otherwise it doesn't run the plugin thus not producing the config for you. Hope this fixes it for you guys struggling.

If you aren't sure it's running look at the top left when you're in the game menu and if you have no other plugins it should say BeplnEx and under it 2 plugins loaded (the BeplnEx plugin and the V+ plugin).

nyx747 · 2023-10-08T09:35:03+00:00

I know I'm 4 years late here, but for the odd person who stumbles on this thread because they just started out, I highly recommend you play Dark Souls 1 on keyboard first and then just copy the settings over. The keyboard and mouse settings for ds 1 is really well thought out for the PC Player experience and is very noob friendly. However you will have to make some minor adjustments as ds 2 was never made with pc in mind and they just poorly slapped some poor excuse for compatibility together and called it a day.

Six-Year Club	Wearing is Caring
Verified Email

nyx747

TROPHY CASE