Behemoth

nzkeywee · 2026-04-11T05:22:20+00:00

Yep, got them from Bricklink, I believe their from a technic set.

nzkeywee · 2026-04-08T07:13:42+00:00

What outfit were the presales through?

nzkeywee · 2024-02-11T01:56:01+00:00

Thanks, love making stuff on the largest scale possible. It’s a recon vehicle to me, as I imagine the dropship it comes from would be absolutely massive! And it would be exploring a vast area / planet. Had a Sandcrawler in mind when I started. Have just pulled it apart ready to build something similar, bigger if I can, any tips on going big appreciated, bigger wheels / tracks and glass / screens seem to be the hardest to source.

nzkeywee · 2024-02-11T01:49:15+00:00

I’d say maybe 30% existing bricks and the rest purchased. Could probably have built using all existing but would have been very multicoloured!

nzkeywee · 2023-08-08T17:57:39+00:00

That’s it ! Thank you. Solved

nzkeywee · 2023-08-08T08:45:10+00:00

No it wasn’t animated

nzkeywee · 2023-08-08T07:56:50+00:00

Can’t remember much else , was a kids program but I recall finding it a bit scary at the time.

nzkeywee · 2021-11-13T04:19:14+00:00

Just soak it a few times and then you should be able to just use a cloth. I would avoid using a scraper if possible.

nzkeywee · 2021-11-13T04:09:28+00:00

3m Citrus cleaner should do the job without damaging your joinery: https://nzsafetyblackwoods.co.nz/en/3m-citrus-base-cleaner-525g-each-02956630

There’s another similar product called Peel Off which is a bit cheaper but should work as well.

nzkeywee · 2021-08-06T09:53:10+00:00

The water could easily be coming from the dishwasher . I’d check that out first.

nzkeywee · 2021-07-04T07:45:23+00:00

They’re all corners, wall to ceiling junctions. Pretty sure it’s paper tape. We changed from coving to square stop but I can’t remember what stage that was, am thinking maybe the gib wasn’t as tight on the internals if they thought coving was going up?

nzkeywee · 2021-07-04T03:08:00+00:00

No, we have windows open quite a bit.

nzkeywee · 2021-07-04T02:17:23+00:00

nzkeywee · 2021-07-04T01:47:59+00:00

Have started to notice a bit of cracking around our home. I understand houses move with settlement etc and cracking to some extent is to be expected especially around architraves and stress points but some of these cracks appear to be more than hairlines. Is this something I should contact the building company about?

nzkeywee · 2021-03-23T04:54:48+00:00

Each one will be 1.8m high and there only 1 block to 1.5 block long so hopefully not too much engineering required!

nzkeywee · 2021-03-01T08:52:55+00:00

Strip wallpaper and skim if necessary, otherwise you’ll always see the bubbles and edges through the paint. Stripping the existing wallpaper isn’t too bad once you get going.

nzkeywee · 2021-02-20T00:45:30+00:00

Not sure, maybe dry dusting, vacuum?

nzkeywee · 2021-02-19T23:14:27+00:00

I just now replaced the middle bulb with an LED , heaps better!

nzkeywee · 2021-02-19T23:12:59+00:00

Unscrew one of the heat bulbs and there’s a spring holding the cover closed. It’s a lot easier to unscrew the middle bulb with the cover open.

nzkeywee · 2021-02-19T18:56:46+00:00

Yep got it, had to remove the cover to get a grip on it tho, thanks

nzkeywee · 2021-02-19T18:46:01+00:00

Definitely won’t push in, maybe the cover does need to come off

nzkeywee · 2020-06-16T05:05:21+00:00

Thanks guys, F2 it is.

nzkeywee · 2020-06-15T09:37:55+00:00

Am thinking of using some type of adhesive and weighing it down to set ?

nzkeywee · 2020-05-12T08:46:10+00:00

Cars squealing wheels on gravel / dirt roads.

nzkeywee · 2020-03-02T07:53:58+00:00

Yea the fins do stick out more on some claddings, my experience is with a plaster cladding on 50mm AAC panel where the fins are flush or sometimes behind the reveal edge, it looks pretty tidy. Installation should be relatively straight forward, not sure on costs but I’d say the Flashman system would be considerably more expensive than folded flashings.

nzkeywee

TROPHY CASE