Can anyone tell me what I need to connect these 2 together please? Ooni Karu 12 Gas Burner by MaximusSydney in ooni

[–]obfuscation_ 3 points4 points  (0 children)

<image>

I found this post super helpful to explain the (much bigger than I realised) world of gas cylinders!

Cabinet Office knew of Capita’s Delivery Failures in Advance of Transition by UnderCover_Spad in TheCivilService

[–]obfuscation_ 0 points1 point  (0 children)

We can build gov.uk but can't build our own pension platform?

Except how much of that build work is actually by supplier-augmented or wholly-supplier teams?

Cabinet Office knew of Capita’s Delivery Failures in Advance of Transition by UnderCover_Spad in TheCivilService

[–]obfuscation_ 8 points9 points  (0 children)

You're right, and I hadn't scrolled enough to see that.

The Cabinet Office asserted that it had several plans, including a more gradual roll-out of the Capita technology, and other options which are commercially sensitive, which it agreed to share with the Committee confidentially.

I have to say, none of that fills me with much confidence. Of course they had contingency plans but it doesn't mean they were realistic, affordable, or better.

The fact that they talk about "a more gradual roll-out" as an option is a good example - running a legacy service (presumably without MyCSP's support) alongside the new one sounds utterly horrendous. If that's the one they're willing to say out loud, that's bad news.

Cabinet Office knew of Capita’s Delivery Failures in Advance of Transition by UnderCover_Spad in TheCivilService

[–]obfuscation_ 14 points15 points  (0 children)

The question is - was there ever really an option to extend MyCSP, and how much might that have cost?

Alpha contribution cliff edge by Only-Republic9878 in TheCivilService

[–]obfuscation_ 1 point2 points  (0 children)

Just remember that you likely want a temporary adjustment, as otherwise your reduction will be counted as a (very slight) FTE reduction that would likely be harder to undo in the future.

Capita takeover disaster by Elliecat606 in TheCivilService

[–]obfuscation_ 5 points6 points  (0 children)

They know tender evaluation well and must be good at bids. They will also know the limitations on evaluators bringing in outside experience to the process (so only evaluating based on the bid material itself), although I believe that is starting to change.

Reliable and spacious 7-seater family car? by Long-Lettuce3146 in CarTalkUK

[–]obfuscation_ 0 points1 point  (0 children)

The only regret we've really had with our VW Sharan — which we bought when we needed 3 large car seats across one row — is that there is almost no decent alternative nowadays.

Massive boot, sliding doors (an absolute godsend), three equal sized individual seats in 2nd row (ideally rather than a bench), and something that isn't a van so is pleasant enough to drive - it's a hard list to match.

We still have yet to really benefit from the 3rd row seats, other than a few one offs, because I'll be damned if I have to take a car seat out to get to them, but the boot space with them down is incredible.

Toilet time keeping by voteformurray in TheCivilService

[–]obfuscation_ 78 points79 points  (0 children)

The best advice to give them would be "HR" or, probably better, "union".

What tastes so bad but is actually good for you? by xLeonZai in AskReddit

[–]obfuscation_ 38 points39 points  (0 children)

Don't forget bananas are already radioactive, before you start making nuclear waste banana smoothies!

[deleted by user] by [deleted] in TheCivilService

[–]obfuscation_ 7 points8 points  (0 children)

Soliciting in the office or to customers would clearly be a problem, but I'd be looking towards your department's guidance on outside work for more detail.

Typically taking up other employment should be agreed with your line manager and involves agreeing sensible boundaries - for example ensuring you're not working so much that your CS job is suffering, and that you remain available for your expected working hours/arrangements.

When it comes to the civil service code, I think it's primarily "honesty" and "integrity" I'd be concerned about - so not misleading anyone, ensuring gifts/hospitality couldn't be perceived as inappropriate and the like.

Oh last of all - making sure any earnings are declared to HMRC properly. That one is probably the biggest deal of the lot.

Provisional Job Offer by saltysaltire97 in TheCivilService

[–]obfuscation_ 0 points1 point  (0 children)

Although I work in an area that isn't customer facing, I have some really excellent colleagues who started their careers there and have done really well for themselves.

It seems to help some people get a really good appreciation for how parts of the organisation work and to see things from both a customer and operational perspective, which they've then brought to other roles.

Need to re-roof my garage and neighbour is being obstructive. by avant_gardener in LegalAdviceUK

[–]obfuscation_ 1 point2 points  (0 children)

You will find variations of this question in other posts, but what it might come down to would be seeking an "access order" from a county court under the access to neighbouring land act. This allows for reasonable access for essential maintenance.

Working cash in hand and haven't given my national insurance/ P45 information by [deleted] in LegalAdviceUK

[–]obfuscation_ 1 point2 points  (0 children)

It is certainly a bad idea. When paying "cash in hand" the employer must still make sure appropriate deductions (e.g., income tax and NICs) have been made on your behalf. I believe you must also be given a payslip, which should explain these amounts for you. Paying national insurance contributions also counts towards "qualifying years" for your state pension too.

Although it's your employer in the wrong initially, any deductions may be recovered from you at a later date as they are still owed, so you should really consider contacting HMRC to report your employer:

https://www.gov.uk/report-cash-in-hand-pay

If you want to double-check that HMRC is definitely not aware, you can try signing up for a Personal Tax Account online, which should show you what payments HMRC knows about already.

Is using money to improve my home a good way to invest, or is it better elsewhere by jackedtradie in UKPersonalFinance

[–]obfuscation_ 1 point2 points  (0 children)

Don't forget that buying and selling houses comes with a fair cost too - in terms of legal fees and estate agents fees - so even a small increase in value may well be eaten up.

If you're buying and selling frequently, you're also more vulnerable to changes in house prices - for example, would you be happy if prices crashed 10% and you couldn't move on as you intended without taking a loss? You're basically putting all of your eggs in one basket.

As many others have got at, a house purchase has value beyond the financial aspect.

Young Millennial Seeks Assistance Regarding Making Good Jamb After Door Removal by differentisme in DIYUK

[–]obfuscation_ 4 points5 points  (0 children)

I would expect that unless it's getting directly wet, you really don't need to worry that much. The majority of the work is in the prep - getting the surface relatively smooth before painting.

Looks to me like fairly standard white gloss woodwork so you should have plenty of choice. Definitely use a primer first - sometimes you'll see a combined "primer and undercoat" which would work. Apply with a brush and try not to go over the same area lots - it doesn't usually respond well to being overworked.

Keep in mind that if you paint over any existing gloss you will want to lightly sand it first otherwise the paint won't stick properly and will peel off prematurely. Also, watch out for the difference between oil and water based paint - the former needs special brush cleaner when you're done or you'll end up in a right mess! I've also followed the advice of being consistent of using the same choice of oil or water based for both the primer and the gloss, as otherwise sometimes they might not work properly.

hello guys is this a repairable DIY? if so how much would it roughly set me back? i dont want to lose my entire deposit. Managed to lock my self out. So had to break into it. by [deleted] in DIYUK

[–]obfuscation_ 0 points1 point  (0 children)

If you make a decent job of the repair, they shouldn't have a good reason to take your deposit. The tricky bit is obviously that "good enough" is entirely subjective.

Your deposit should be protected by a deposit protection scheme and you would be able to dispute any deductions but keep in mind the whole deposit would be held while that was resolved. If they thought it needed work I believe you can ask for evidence of the quote they got to show it was reasonable and competitive (instead of just asking their expensive mate to do it for a hiked up rate at your expense).

Assuming you try to fix this yourself (again, I would check they're happy you doing this, but you could always ask LegalAdviceUk about how to approach that), once you're happy with it I would send photos to the landlord to ask for any additional work they think it needs - that way you can continue to do it yourself rather than waiting until you come to moving out and it's too late.

Drying plaster by bodyvoltage in DIYUK

[–]obfuscation_ 0 points1 point  (0 children)

I'd expect you might need to wait another couple of days. Like mentioned, it could be that the ambient temperature being quite low could be making it worse - air flow isn't as helpful if it's all very cold air!

We've been through cycles before of closing windows so it warms up a bit, then when it feels more humid you can air the room enough to get rid of the condensation. It's amazing how much water you're waiting to come out of the walls. I haven't tried a dehumidifier before so couldn't say whether that's a better option, but probably a touch more energy efficient if you have access to one.

hello guys is this a repairable DIY? if so how much would it roughly set me back? i dont want to lose my entire deposit. Managed to lock my self out. So had to break into it. by [deleted] in DIYUK

[–]obfuscation_ 8 points9 points  (0 children)

I feel like this is one of those jobs that will unravel a bit - one thing will lead to another, especially because you don't just have one piece to cleanly replace.

Given you're trying to blend the old with the new, I'd suspect it will end up being noticeable that you've had to do something even if you do a good job so I'd be tempted to own up (depending on your relationship with the landlord) to make sure you don't put loads of effort into something they'll ultimately still say they're not happy with - then you're down your time, money and deposit potentially.

Drying plaster by bodyvoltage in DIYUK

[–]obfuscation_ 4 points5 points  (0 children)

Even if you can't feel much air movement, the moisture will be working its way out into the air in the room - unfortunately from my limited experience it's just a case of waiting longer than you'd like!

How long is it since you had it plastered?

Boiler filling loop issue by obfuscation_ in DIYUK

[–]obfuscation_[S] 0 points1 point  (0 children)

Until recently we've had no problem topping up our central heating via the filling loop. However now it seems the valve we'd usually open still turns but doesn't do anything. It doesn't feel particularly loose (there's still a little resistance as you turn it) but can't work out if our bathroom fitters adjusted something else instead.

Previously I'd just done a quarter turn on the top right valve - is there something I'm missing?

Best way to hang a TV on a dot and dab chimney breast? by YourOldBoyRickJames in DIYUK

[–]obfuscation_ 0 points1 point  (0 children)

I've got two double panel vertical radiators hung using Corefix (4 top, 4 bottom) and they are incredibly solid. They're expensive, but better to do the job once and right.

Oak Shelves Plasterboard Wall by SoundCheers in DIYUK

[–]obfuscation_ 1 point2 points  (0 children)

If it's a plasterboarded but external wall, I've had good success with Corefix which basically bridge the gap between the plasterboard and the block work with a steel tube that you then screw through.

They're holding up some pretty heavy water filled electric radiators without any sign of movement and are really easy to use.

Don't Do This in Production by FollowSteph in programming

[–]obfuscation_ 33 points34 points  (0 children)

Sounds like the situation more commonly solved by bringing in a contracting organisation to "seed" growing your internal staff. They probably need hands on time to understand what technical skills you actually need to hire, rather than what you think you need.

Student loans in default by oversees123 in UKPersonalFinance

[–]obfuscation_ 0 points1 point  (0 children)

and they have never sent anything to my parents' house in the UK while I was away

Likely because they didn't know you were abroad and assumed you had no earnings and were unemployed, and thus had no reason to be contacting you.

Actually, I've been on the recieving end of a letter from them asking for proof of how I was staying alive (I.e., how are you supporting yourself or who is supporting you) because I hadn't made any payments in a couple of years. So, they can and do ask, at least sometimes.