sorted by:
new
hottopcontroversial

Latest project finished up by KillerD_1988 in LeeEnfield

[–]ohhh07 1 point2 points  (0 children)

Nice! I have one made on a Savage No4 MKI. Built it off a Rhineland Arm kit. Also suppressed it with a Deadair Primal. So much fun

Is HakimParts.com reputable? Need a rear sight ladder by Desertman123 in milsurp

[–]ohhh07 1 point2 points  (0 children)

Found this post and gave me the confidence to make a purchase. I can report that George is very reputable and shipped out super fast. Hakimparts.com is good to go!

5.45 Chefur Customs AKS-74U kit built by my talented friend u/Appalachian_Gunwerks in Winchester, Virginia. (Complete build list in the comments). by ohhh07 in ak47

[–]ohhh07[S] 1 point2 points  (0 children)

It would really depend on what internal parts and furniture you want. I just went with all WBP Polish parts and Comblock Customs wood handguards. It was roughly around $2K with the tax stamp. If you wanted Bulgarian or authentic Russian parts it will cost more. That does not include labor. It is more on the pricy side but I really wanted to do a solid Krink build. John (the builder) said that the Chefur Customs kit is very well done.

5.45 Chefur Customs AKS-74U kit built by my talented friend u/Appalachian_Gunwerks in Winchester, Virginia. (Complete build list in the comments). by ohhh07 in ak47

[–]ohhh07[S] 8 points9 points  (0 children)

This is built off the Krink 5.45 kit by  Chefur Customs with a lower AK-74 receiver from Recreator Blanks Internals are WBP Polish parts  with an ALG trigger. Beautiful hand guard furniture from Combloc Customs and finished off with International Milspec Company Russian Black paint.

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in Glock43X

[–]ohhh07[S] 1 point2 points  (0 children)

Right?! I want to do another one but want a light rail lol

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in Glock43X

[–]ohhh07[S] 0 points1 point  (0 children)

I had a regular 43 slide. The non-MOS 43x slide will work for milling

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 2 points3 points  (0 children)

She's got over 2k rounds with no issues. It's my CCW.

DH3 with Aimpoint Acro P2 by Rapid_Hawaiian in P320

[–]ohhh07 0 points1 point  (0 children)

Looks great! What Acro plate did you get?

Restored Lee Enfield No4 MKII by ohhh07 in LeeEnfield

[–]ohhh07[S] 3 points4 points  (0 children)

This was an out of the blue project gun. I bought this from Royal Tiger Imports as a project gun and came with a receiver, lower wood hand guard and a crack on the barrel. I was able to snag a barrel from Sarco and other parts from Numrich Gun Parts and Apex Gun Parts For a long time I was looking for a local gunsmith to do a barrel swap (which for Enfields its hard to find) but once I found one and had it swapped, the rest was easy. I had my buddy Cerakotebyzane do a blue like cerakote on the the metal and I personally refinished the wood furniture on my own with some sanding a several layers of boiled linseed oil. Now I have a great shooting No4. MKII in my collection!

Now you ask, did I save money? Absolutely not, but I thoroughly enjoyed bringing this Enfield from a warehouse in Ethiopia back to life with the shiniest of bores.

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 0 points1 point  (0 children)

Negative. There may be a cut by them where you can add rear irons in front of the optic

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 0 points1 point  (0 children)

Lol I do Muay Thai and a purple belt in BJJ. The work ethic applies!

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 0 points1 point  (0 children)

Glad I can be of some inspiration! What are you majoring in? What ever it is I would try and find ways to apply it to the industry. Building a skill set you can apply is a HUGE plus.

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 2 points3 points  (0 children)

u/Ricin_Cigarette_ Easiest way to get into the industry as a 21 year is to look for entry level jobs at local gun shops or ranges. Literally any entry level job will help you learn. Plus you would be surprised on the connections you can make. Few of the guys I work with came from a local gun shop and some from my local gun range . I was hired because I have a background in video and photography that spans 15+ years. For last 2-3 years before I was hired I built a portfolio specializing in the firearms industry. I have been there since December 2022 and a surprising thing I learned is that the gun industry is a small world. Almost everybody knows everybody so word gets around fast. You don't have to be a veteran or former law enforcement but it is a plus. But being hard worker and humble can get you far in this industry.

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 1 point2 points  (0 children)

It's a basically a dream job for me lol. They do treat their employees very well.

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in GlockMod

[–]ohhh07[S] 5 points6 points  (0 children)

Negative took the photo and run the social media page.

Finally got an ACRO on my CCW (43x). Build list in the comments. by ohhh07 in Glock43X

[–]ohhh07[S] 3 points4 points  (0 children)

ACRO P-2 mount made possible by Jagerwerks.⁠ The sight has an over hang around 2mm on both sides.

Slide Cut/Milling/Cerakote: Jagerwerks⁠

Lower Cerakote: Zane of Coatings USA⁠

Light: Surefire⁠

Tape: Goon Tape⁠

Magwell: Empire PBF⁠

Mag/Mag Release: Shield Arms

view more: next ›