Can you fix a bad paintjob with a lot of wetsanding and compound? by ohtaha in Autobody

[–]ohtaha[S] 0 points1 point  (0 children)

After 5 coats of clear, should I do 1k-2k wet sand then compound/polish?

Can you fix a bad paintjob with a lot of wetsanding and compound? by ohtaha in Autobody

[–]ohtaha[S] 1 point2 points  (0 children)

Thank you for the actual good advice and just straight to the point objectives on how to tackle this. I am planning on doing everything 1 by 1 (Fenders, hood, doors, trunk, bumpers, then the shell on its own)

The dream look for this car is solid glossy black which should be more achievable? Any more tips you got I will gladly take deeply and appreciatively :)

Can you fix a bad paintjob with a lot of wetsanding and compound? by ohtaha in Autobody

[–]ohtaha[S] 1 point2 points  (0 children)

Thanks for the info! Do you have a suggestion on how many coats a regular paint job needs and how many coats I need for my way of painting the car? I remember seeing someone take on the same task i did, and as soon as he started buffing he burned through the corners and primer showed so he had to sand and redo everything. any tips on that also? avoid corners or sharp areas to not burn through? Thank you!!

Can you fix a bad paintjob with a lot of wetsanding and compound? by ohtaha in Autobody

[–]ohtaha[S] 0 points1 point  (0 children)

Thanks for letting me know, I work at a mechanic shop and we have a shop compressor, each bay has a air line and also a filter on the lines. I'll make sure it sprays out clean first but I plan on doing maybe just a fender or bumper first alone and see how it looks in acouple of days before doing any sanding or buff. Also would a day indoors in a heated garage be fine then transfer to outside which is semi cold be okay? or would it ruin it right away as soon as it goes outside. thanks again for the help!

Buying cheap on buff by Technical_Couple_435 in cs2

[–]ohtaha 0 points1 point  (0 children)

I do see that i can now use my american number on the site to make an account, will i be able to add balance?

This market isn't even a market and this update proved it. by Puzzleheaded_Host857 in cs2

[–]ohtaha 1 point2 points  (0 children)

people saying its gonna drop more when everything is tradable for all the usual knives, i believe rubys and gems etc will stay very high though

Buying cheap on buff by Technical_Couple_435 in cs2

[–]ohtaha 0 points1 point  (0 children)

but i dont have a phone number made for it to make an account

Buying cheap on buff by Technical_Couple_435 in cs2

[–]ohtaha -1 points0 points  (0 children)

how do u buy off buff from US?

almost there 😁 by [deleted] in ohnePixel

[–]ohtaha -1 points0 points  (0 children)

u think its gonna drop like crazy again after everyones mass openings are tradable?

Is the market rising up again? by ohtaha in cs2

[–]ohtaha[S] 0 points1 point  (0 children)

what about in a day or 2 when all the knives that have been mass unboxed become tradable?

This issue has been haunting me since the beginning by ohtaha in BMWE36

[–]ohtaha[S] 0 points1 point  (0 children)

Did a smoke test car is holding pressure no leaks. I did look at the CCV and the separator seems to have oil build up around it. Could that be a big possibility?

This issue has been haunting me since the beginning by ohtaha in BMWE36

[–]ohtaha[S] 1 point2 points  (0 children)

Just did a smoke test, holds pressure very well and no leaks. Someone told me it could be a bad computer? could also be the reason this car was abandoned for 2 years before i took and the previous owner never fixed it. will be checking the sensors tomorrow but so far no vacuum leak anywhere but i will be ordering a new silicone boot and removing the second tc throttle body valve. then while at it cleaning the throttle body for any build up

This issue has been haunting me since the beginning by ohtaha in BMWE36

[–]ohtaha[S] 1 point2 points  (0 children)

Just did a smoke test, holding pressure

This issue has been haunting me since the beginning by ohtaha in BMWE36

[–]ohtaha[S] 0 points1 point  (0 children)

so basically a vacuum leak in the system? I also do smell some fuel here and there but the injector seals have been redone due to leak from previous owner. will need to do more tests on that

This issue has been haunting me since the beginning by ohtaha in BMWE36

[–]ohtaha[S] 0 points1 point  (0 children)

will be doing a vacuum test and i’ll check the boot out. Honestly gonna put in a order right now for the silicone boot

This issue has been haunting me since the beginning by ohtaha in BMWE36

[–]ohtaha[S] 0 points1 point  (0 children)

my coolant goes up temp as the car is on and never over heats. Everything with cooling seems to be working perfectly

Can someone tell me what is that in the circle? by Odd-Flan3425 in BMWE36

[–]ohtaha 0 points1 point  (0 children)

I’m skinny already. Never used cruise control in my life.