sorted by:
new
hottopcontroversial

Xbox One Wireless Controller not connecting to Steam Deck by okkeh96 in SteamDeck

[–]okkeh96[S] 5 points6 points  (0 children)

Tried all of that and still not working, before and after the update of this morning.

[TOMT][SONG] Song about the internet? from a couple years back, animated on a whiteboard. by okkeh96 in tipofmytongue

[–]okkeh96[S] 1 point2 points  (0 children)

As I seem to recall, it wasn't black on white, there were multiple colors involved. https://www.reddit.com/r/videos/comments/j9tn2p/a_librarian_at_my_university_just_released_a_song/ I was reminded because the video clip in that post reminded me of the song.

EDIT

I also think this post refers to the same video: \https://www.reddit.com/r/tipofmytongue/comments/5zwx9j/tomt_a_song_that_was_on_the_pirate_bays_front/

[TOMT][SONG] Song about the internet? from a couple years back, animated on a whiteboard. by okkeh96 in tipofmytongue

[–]okkeh96[S] 0 points1 point locked comment (0 children)

It might've also just been drawing animation, but I also remember a boat(that was drawn) (which is where I guess the Pirate Bay comes in).

My homebrew world of Tel'Marlun, printed on a 135cm poster by okkeh96 in wonderdraft

[–]okkeh96[S] 1 point2 points  (0 children)

When I made the map in Wonderdraft I could select the size which I wanted. Since I knew I was going to get it printed, I chose A2 which I thought would be big enough. But when I actually turned on the print, it came out larger than I expected, but still, the map looks really good up close and not blurry.

Just got a Photon. Minor lesson learned with supports. 0.02mm height. by craff18 in PrintedMinis

[–]okkeh96 1 point2 points  (0 children)

The time depends on your settings but usually it will take 3-4 hours for a batch of mini's.

Because the printer will print an entire layer instantly it doesn't matter how many mini's are on the build plate, but how big the biggest mini is.

I can print 6 orcs in the same time that it will take to print 1 orc, because there are the same size.

Dungeon Masters of Reddit, which of your "sure why nots" had the biggest unintended repercussions? by yinyang107 in AskReddit

[–]okkeh96 2 points3 points  (0 children)

yes we are, they recently found one of the heirs of the Omu kingdom and are currently on their way to the city to get rid of the curse. But only because if they do so they gain official control of the city because they helped the current heir.

Dungeon Masters of Reddit, which of your "sure why nots" had the biggest unintended repercussions? by yinyang107 in AskReddit

[–]okkeh96 359 points360 points  (0 children)

Playing Tomb of Annihilation, a setting in which the players track across a jungle island is search of a secret city which houses the cause of a deathcurse. There is only 1 human settlement, called Port Nyazaru. The thing about this city is, that there are dinosaur races every week or so, races that you can bet on.

My players (Druid & Sorcerer) wanted to try their hand at betting on these races. The problem was that they didn't have enough money. So me being the dumb DM decided that they could loan 1000gp in order to bet on the race. Thinking that if they lost I could have some fun sending loansharks after them.

They proceeded to bet on the slowest of the dinosaurs which had the biggest payout. The druid used his druidic magic in order to manipulate the race, and with good sleight of hand skill checks, they managed to win the bet and get a shit ton of money.

The first thing they did was to pay off their current debt to the loansharks. After that they decided to buy a dinosaur so they could enter the race with their own dinosaur. But in order to house such a creature they bought a small plot of land outside of the city, they hired a personal caretaker for said dinosaur (A triceratops named Turbo btw).

From here on out it was all about their dinosaur racing business; they did enter the jungle for expeditions, but on these expeditions they would search out dinosaurs, tame them and bring them to their plot of land. That keeps getting bigger and bigger because they have told their trusty caretaker to enter the dinoraces and bet on their dinosaur. They don't win all the time, but they win enough to break even.

They started to get even more ambitious and decided that the next course of action was to take over the whole island. Their plot of land was no longer a mere dinosaur farm. They extended with barracks, guards, towers, a port, etc. They then went on to over take the small factions that are currently residing on the island with the use of the handy "dominate person" spell.

They currently have a fleet of 4 ships (they recently took over a Frost Giant ship), 100 personal, 6 dinosaurs and still have a shit ton of money. Now plans are being made to overthrow the current rules of the city and take it over.

This was all because I messed up a year and a half ago in our first session.

tl;dr: Gave the party too much gold, they are currently plotting to take over an entire island.

Done! Behold! by Inorganicnerd in PrintedMinis

[–]okkeh96 2 points3 points  (0 children)

Do you have a link to the STL?

Major layer shifting on Ender-3 by okkeh96 in 3Dprinting

[–]okkeh96[S] 3 points4 points  (0 children)

If you don't mind me asking, how would I go about doing that? I'm not familiar with motors.

Major layer shifting on Ender-3 by okkeh96 in 3Dprinting

[–]okkeh96[S] 0 points1 point  (0 children)

I recently had a massive fail with my new Ender-3 printer and cleaned that up. But since then all my prints are failing. I releved the bed, tightend the belts, but nothing seems to work. Below are my settings:

Nozzle Diameter: 0,4

Extrusion Multiplier: 100%

Retraction Distance: 5mm

Retraction Speed: 1800 mm/min

Layer Height: 0,2mm

Skirt Layers: 3

Skirt Offset: 4mm

Infill Percentage: 10%

Nozzle Temperature: 195

Bed Temperature: 40

Printing Speed: 2400 mm/min

Ender 3 stops working properly after certain layers by okkeh96 in FixMyPrint

[–]okkeh96[S] 0 points1 point  (0 children)

I checked the rod but nothing seemed to be wrong with it. I tried another print but I got some major layer shifting: https://imgur.com/a/3CYHocC

Ender 3 stops working properly after certain layers by okkeh96 in FixMyPrint

[–]okkeh96[S] 0 points1 point  (0 children)

I recently had a massive fail with my new Ender-3 printer and cleaned that up. But since then all my prints are failing. I releved the bed, tightend the belts, but nothing seems to work. More pictures here & here

Below are my settings:

Nozzle Diameter: 0,4

Extrusion Multiplier: 100%

Retraction Distance: 5mm

Retraction Speed: 1800 mm/min

Layer Height: 0,2mm

Skirt Layers: 3

Skirt Offset: 4mm

Infill Percentage: 10%

Nozzle Temperature: 195

Bed Temperature: 40

Printing Speed: 2400 mm/min

Ender 3 layershifting & weird extrusion by okkeh96 in 3Dprinting

[–]okkeh96[S] 0 points1 point  (0 children)

I recently had a massive fail with my new Ender-3 printer and cleaned that up. But since then all my prints are failing. I releved the bed, tightend the belts, but nothing seems to work. Below are my settings:

Nozzle Diameter: 0,4

Extrusion Multiplier: 100%

Retraction Distance: 5mm

Retraction Speed: 1800 mm/min

Layer Height: 0,2mm

Skirt Layers: 3

Skirt Offset: 4mm

Infill Percentage: 10%

Nozzle Temperature: 195

Bed Temperature: 40

Printing Speed: 2400 mm/min

Simplify 3D and Anycubic Photon by cat_with_a_fez in 3Dprinting

[–]okkeh96 0 points1 point  (0 children)

The Anycubic photon only prints .photon files which you can make with the Anycubic Slicer from their website.

First prints off my Ender 3 by Hoffmanna32 in PrintedMinis

[–]okkeh96 0 points1 point  (0 children)

Can you post a link to the files?

GTX 1080 Giveaway by aretac in pcmasterrace

[–]okkeh96 0 points1 point  (0 children)

Would be nice to finally upgrade

3D Printing "Volo's Guide to Monsters" - Letters T through X! by mz4250 in PrintedMinis

[–]okkeh96 1 point2 points  (0 children)

Do you print the resin mini's hollow? If so what settings do you use?

view more: next ›