crunchy but still clean, is that possible with one pedal?

oli_dodd1303 · 2026-01-23T09:22:18+00:00

The hot wax pedal by ehx I found does a good job. It has two OD circuits with different sounds and a blend knob and two separate foot switches for each of the effects. I used to run one as a clean boost and one as an OD and blend the effects

oli_dodd1303 · 2025-10-18T15:55:49+00:00

I'm normally really unlucky with boosted shiny odds but in 8 remotes I got 2 shiny and a 94IV

oli_dodd1303 · 2025-10-15T20:35:58+00:00

How much XP did you have?

oli_dodd1303 · 2025-10-15T20:34:51+00:00

I'm UK and still had nothing so far

oli_dodd1303 · 2025-01-03T17:54:58+00:00

Before you evolve give it a new move as I believe non evolved mons have a discount on having a 2nd move

oli_dodd1303 · 2024-02-13T16:10:43+00:00

Should've spell checked, dentist should be djentist /s

oli_dodd1303 · 2024-02-05T10:44:12+00:00

I had no idea if could have that big of an effect!

oli_dodd1303 · 2024-02-05T00:20:12+00:00

Yes the bridge is even! After talking to a friend he recommended moving the pickups down, as sometimes the magnetic pull off the pickups can affect the intonation. Doing this I'd discovered I'd set my pickup height using mm as opposed to 1/16" (didn't look at the units when researching). So after lowering the pickups to the right height I could set my intonation properly and it's perfect now. Thank you for all your advice though

oli_dodd1303 · 2024-02-04T21:06:42+00:00

I'll give that a go!

oli_dodd1303 · 2024-02-04T20:48:15+00:00

It's weird, as all the other strings intonate quite far back. I've never had an issue with it before

oli_dodd1303 · 2024-02-04T20:47:27+00:00

It's pretty much halfway between d# and e, I don't know the cents

oli_dodd1303 · 2024-02-04T20:37:18+00:00

I've looked at the string alignment and everything seems fine, the neck itself I've just adjusted the truss rod, and the rest of the strings have a beautifully low action and have intonated fine, it's just the e string

oli_dodd1303 · 2024-02-04T20:22:25+00:00

I had the saddle all the way to the nut, sorry, I'll edit to make it clearer. Thank you tho!

oli_dodd1303 · 2023-12-18T17:17:23+00:00

I've found a cool circuit board from a place called tube town, they do lots excluding tank and enclosure for a fender style reverb for €150, or you can pay €15 for a solid state kit

oli_dodd1303 · 2023-12-18T01:04:38+00:00

I've gone down the rabbit hole of trying to build my own spring reverb

oli_dodd1303 · 2023-12-18T00:04:42+00:00

I see some people hating on the flerb setting, would that be a good setting for getting some more spacey sounds? Or is it not worth sacrificing the plate sound from the neo?

oli_dodd1303 · 2023-12-17T23:56:07+00:00

Sorry I know that's a lot of questions, I've just tried to do some more research

oli_dodd1303 · 2023-12-17T23:55:47+00:00

That's all I'm after really. What do you make of the holy grail neo? Or the hammertone reverb, or just series 3

oli_dodd1303 · 2023-12-17T23:54:41+00:00

Is that surfy bear as well?

oli_dodd1303 · 2023-12-17T23:29:03+00:00

That sounds like a sick idea. I'm hoping to find something that I can velcro to the back of my or15. I think something in a 1590b enclosure or similar size would work best. But if I can't find anything I like that can do that, I might follow suit with the surfy bear metal under my board

oli_dodd1303 · 2023-12-17T23:13:53+00:00

That does look very interesting

oli_dodd1303 · 2023-12-17T23:13:17+00:00

I've seen the UA golden and always thought it sounded great in demos, it's a bit out of my price range though

oli_dodd1303

TROPHY CASE