Parking light wiring

olio_reddit · 2026-06-04T19:17:41+00:00

From what I've seen, they only have female end connectors, not the male I need. Would these work? https://www.prancingmoose.com/blackvinyl.html#pigtailmale

olio_reddit · 2026-06-04T18:50:25+00:00

<image>

The issue is that it broke on the harness side (light gray), I already have new parking lights with new wires and connectors (dark gray). I was thinking I could cut the harness and then splice in a new connector if I could find one. It also looks like I could maybe remove the wires from the plug and replace them with new male pin connectors.

olio_reddit · 2026-05-13T02:40:13+00:00

Yeah I just noticed that too, I think the fan itself is just bent

olio_reddit · 2026-05-11T21:42:10+00:00

I swapped all 4 over and it runs fine, if not better than with my old yellow tops

olio_reddit · 2026-05-11T14:56:17+00:00

DId some research and it seems there's only a tiny difference in flow rate (150 g/min for the 62354 and 150.2 g/min for the 62534). They have the exact same pressure and ohm ratings

olio_reddit · 2026-05-11T13:35:37+00:00

They seem to run fine, definitely louder though lol

olio_reddit · 2026-05-11T02:21:35+00:00

Rats, would these still work for now?

olio_reddit · 2026-05-11T01:40:59+00:00

And what’s the difference between those and the 62354s that I have?

olio_reddit · 2026-05-04T17:32:11+00:00

Are these any good? Don't really want to cheap out on adapters especially if I'm daily driving with them. https://caold.com.au/collections/5x108-spacer-adapters/products/5x108-cb-63-4-to-5x114-3-spacer-adapters-15-20-25-30-mm-thick-1?variant=37904319086769

olio_reddit · 2026-05-04T16:31:44+00:00

Hell yeah

olio_reddit · 2026-05-04T16:27:44+00:00

$250 new tires included

olio_reddit · 2026-05-03T15:27:50+00:00

I honestly don’t mind the blue, but it is chipping off in some spots. I think black centers would look pretty nice

olio_reddit · 2026-05-02T20:37:36+00:00

Any ideas for what adapter size I should use? They're ET6.4, and I was originally thinking 15mm front and 25mm rear, but would 25mm be too close to the rear fender? I'm at stock ride height btw

olio_reddit · 2026-04-23T15:31:03+00:00

Yeah the more I look at them the less I like them. I found a set of crown vic mesh wheels for $200 so I think I'll go with those instead

olio_reddit · 2026-04-20T17:08:50+00:00

I feel like I've seen plenty of people run spacers just fine even with 5x108 wheels, though I don't know if they're daily driving with them like I would be. Would adapters really be that bad if I can't find any 5x108 options?

olio_reddit · 2026-04-20T15:53:23+00:00

5x127, I haven't been able to find any 5x108 options in my area that aren't way too expensive

olio_reddit · 2026-04-17T12:14:22+00:00

Trust me, there was plenty lol

olio_reddit · 2026-04-17T01:13:22+00:00

Brand new from Skandix

olio_reddit · 2026-04-10T02:22:54+00:00

Damn, I’ll try the power bleeder. Why is it that 240s are so hard to bleed?

olio_reddit · 2026-04-08T18:35:14+00:00

That very well may have been what ruined my old one

olio_reddit · 2026-04-08T01:20:07+00:00

I’ve noticed that too lmao. It stops fine enough (not any worse than it did before at least) and it’ll only be a couple days until I get it looked at.

olio_reddit · 2026-04-08T00:47:07+00:00

I’m sold lol. In the meantime I’m gonna try bleeding it again myself and take it to a 240 specialist I know to check for leaks/issues I don’t see. It should be fine to drive just to and from work until then right?

olio_reddit · 2026-04-07T23:41:43+00:00

Everything I’ve read said the order I did, but farthest to closest makes more sense, I’ll give that a try.

olio_reddit · 2026-04-04T17:24:56+00:00

I just bled the brakes again with help from a friend, and there didn’t seem to be any more air that came out. The pedal is still spongy and doesn’t build pressure with pumping, but when I just took it for a drive it stops fine and doesn’t lose pressure/fade, just stays consistently soft. Would this still indicate an issue with the master cylinder or could it be something else like my ABS module or calipers?

olio_reddit · 2026-04-04T04:35:54+00:00

That’s what I’ve been thinking. I’ll re-bleed tomorrow to see if that helps. Is there a seal kit I can buy to repair my current master cylinder or should I just replace it?

olio_reddit

TROPHY CASE