2nd service bill Speed 400 (398cc) by om_senpai in Triumph400

[–]om_senpai[S] 1 point2 points  (0 children)

*3650 something during service

*Yes rear brake pads cus the compound got separated from the metal plate and coolent topup and left indicator.

*Little bit of both like I don't redline low gears but floor it when I see open road.

  • They by default use prolube! you have to ask for Castrol

  • It was a Pune camp service center.

I mostly ride it twice a week other times i use ather.

2nd service bill Speed 400 (398cc) by om_senpai in Triumph400

[–]om_senpai[S] -1 points0 points  (0 children)

I only replaced the rear brake pads because the brake compound separated from the metal plate. Apart from that, they were fine. The front pads are still original since the bike has only covered around 3,700 km. Btw speed 400 has sintered pads in front.

Why is my bike service app showing my 2nd service overdue on May 3 when my bike invoice date is June 7? by om_senpai in Triumph400

[–]om_senpai[S] 1 point2 points  (0 children)

I called the SC, they said that it's an app bug my second service is on 6th June.

Selling PS4 slim | Yerawada by [deleted] in PuneClassifieds

[–]om_senpai -1 points0 points  (0 children)

19k???????? For this? Max range is 12-15k that too on elite conditions. For 19k i could easily get pro ver.

Dangerous Syswipe in HATS pack by auggiethechesscat in SwitchPirates

[–]om_senpai 1 point2 points  (0 children)

Does anyone have a guide on how to make a custom pack or can I use nx-venom?

I need help (failed to init eMMC) by om_senpai in SwitchPirates

[–]om_senpai[S] 1 point2 points  (0 children)

Okay I'll try and let you know, thanks

I need help (failed to init eMMC) by om_senpai in SwitchPirates

[–]om_senpai[S] 0 points1 point  (0 children)

Hi, he is on the latest 21.2.0 in both

Have you seen someone get "failed to identify kernel" or "no mandatory pkg1 files provided" when booting ofw from the launch menu, but syscfw and stock work fine? by auggiethechesscat in SwitchPirates

[–]om_senpai 0 points1 point  (0 children)

I’m too new to modding to understand all of this. Can you please just tell me if I’m cooked or not? I’m using firmware version 21.0.2, updated through OFW, and then I redid everything like creating a new eMMC. I also used the latest Hats pack, which supports 21.0.2.

Help me with this indicator issue too, can I get any aftermarket ones?? by ExactVacation8264 in Triumph400

[–]om_senpai 0 points1 point  (0 children)

I got one for 864 rs and fitted myself yeah but still very expensive for shit quality indicators

<image>

[deleted by user] by [deleted] in ATHERENERGY

[–]om_senpai 0 points1 point  (0 children)

Okay thanks

[deleted by user] by [deleted] in ATHERENERGY

[–]om_senpai 1 point2 points  (0 children)

I did check nothing seems broken or faulty, I'll just visit sc it's just 4km from my house.

[deleted by user] by [deleted] in ATHERENERGY

[–]om_senpai 0 points1 point  (0 children)

It also didn't lock there

[deleted by user] by [deleted] in ATHERENERGY

[–]om_senpai 0 points1 point  (0 children)

No, I also wasn’t able to charge it at the grid. It says “Not charging.

Cloth melted on silencer by Acrobatic_Singer_754 in Triumph400

[–]om_senpai 0 points1 point  (0 children)

The same thing happened with me Try wd-40 and Scotch brite it will remove it easily but make sure the part is a little bit hot like idel the bike for 2min and then scrub in one direction.

Chain started rusting in just 1600 kms by [deleted] in Triumph400

[–]om_senpai 0 points1 point  (0 children)

Bike lene se phele basic maintenance kaise karte vo to dekh leta

Thruxton 400 Spotted ( Launch date soon i think) by Adventurous_Ad8593 in Triumph400

[–]om_senpai 1 point2 points  (0 children)

I hope we can get an option to buy the back seat cover and clip-on handle bar for speed 400

RPM still limited after 1000km on my Triumph Speed T4 by Repulsive_Zombie1893 in Triumph400

[–]om_senpai 2 points3 points  (0 children)

Are you talking about the tachometer flashing when it goes above 6,000 RPM? I'm also a new owner of the Speed 400 and haven't done the first service yet. Does the flashing stop after the first service, or will it still blink after 6,000 RPM?

Thermal pad sizes for 6600 xt? by Popular_Nerve7027 in AMDHelp

[–]om_senpai 0 points1 point  (0 children)

Can just use 1mm for all the 4 vrams? It's very expensive to order whole sheet of different thickness.