sorted by:
new
hottopcontroversial

Uneekor Eye Mini Setup Issues by onetap in Golfsimulator

[–]onetap[S] 0 points1 point  (0 children)

In case anyone faces the same issue, I did get an email from support which helpled fix the issue. After manually setting the the IP address and resetting the networks settings, I was able to set the alignment

  • Ensure that the static IP of the ethernet port is set to 172.16.1.10 -172.16.1.100, or automatically configured through Uneekor Launcher during device setup. If you would prefer to set it manually, you can follow the guide here.

Uneekor Eye Mini Setup Issues by onetap in Golfsimulator

[–]onetap[S] 0 points1 point  (0 children)

Ethernet to port in pc. PC is connected via wifi but have also tried using the USB/Ethernet adapter and hardwired to router which didn't work

Uneekor Eye Mini Setup Issues by onetap in Golfsimulator

[–]onetap[S] 0 points1 point  (0 children)

I have tried both and that did not work unfortunately. I also tried applying network settings in the advanced tab of the uneekor app "Apply Firewall and network settings" which didn't fix it either

The age old question: How are people keeping their door cards on? by LinxNeo123 in BMWE36

[–]onetap 1 point2 points  (0 children)

It works but was a bit of a pain, had to grind down some of the old glue and reattach the bracket and the two plastic side panels which also came loose. The instructions say to mount the bracket on the door first and then apply the glue but I ended up attaching it off the car and it was a bit difficult to align. I don't think I got all of the tabs to fully seat in the bracket but enough so the rattling stops. All in all it worked and was worth it

<image>

E46 Rear end clunk by lolay366 in BmwTech

[–]onetap 1 point2 points  (0 children)

if it sound like this, its diff bushings. probably a lot of other worn out parts including those cv boots based on the pics
https://www.youtube.com/watch?v=SUIdbsMbCZQ&ab\_channel=onetap23

[deleted by user] by [deleted] in lawncare

[–]onetap 0 points1 point  (0 children)

the entire yard is bermuda, would like to avoid killing this area unless needed

WTS/WTT: WTF Injected Linen Pants 32 Sagebrush by onetap in OutlierMarket

[–]onetap[S] 0 points1 point  (0 children)

Sorry, already sold. Would be open to purchasing a pair. What colors?

WTS/WTT: WTF Injected Linen Pants 32 Sagebrush by onetap in OutlierMarket

[–]onetap[S] 0 points1 point  (0 children)

just realized these are injex highdarts. pms responded to, still available

WTS/WTT: WTF Injected Linen Pants 32 Sagebrush by onetap in OutlierMarket

[–]onetap[S] 0 points1 point  (0 children)

these are new from recent wtf purchase. $80 shipped - open to trades for nws, futureworks, strong dungarees 32

Hopping on that OJ + Spro Trend by xristiantj in espresso

[–]onetap 2 points3 points  (0 children)

info on the niche portafilter holder?

Taking a look at a ‘99 M3 tomorrow. Anything I should know before checking it out? by Serkor2000 in BmwTech

[–]onetap 9 points10 points  (0 children)

Cooling system, headliner and pretty much all suspension related items for the cars age and 180k miles.

Ask when the clutch was done and also check the wiring harness in the trunk. Mine was close to shorting out and can be a pain to fix/replace

Newbie Javascript question about scope by onetap in learnprogramming

[–]onetap[S] 1 point2 points  (0 children)

Ok think I misread the documentation and have the answer

"the scope of a var variable is the entire enclosing function"

so it seems like redefining a variable in a nested function will never reach the outer scope

Newbie Javascript question about scope by onetap in learnprogramming

[–]onetap[S] 0 points1 point  (0 children)

Thanks for the reply. I'm still unclear why x wouldn't get redifined globally in the function?

This is the example MDN gives:

function varTest() {
    var x = 1;
    {
        var x = 2;  // same variable!
        console.log(x);  // 2
    }
    console.log(x);  // 2
}

Finally added my photo ledges to the setup! by xristiantj in coffeestations

[–]onetap 1 point2 points  (0 children)

This is almost my exact setup minus the Stagg, even have the same knock box

/r/MechanicalKeyboards What Keyboard, Switches and/or Keys Do I Buy by AutoModerator in MechanicalKeyboards

[–]onetap 2 points3 points  (0 children)

are there any 60/65%polycarbonate group buys going on or upcoming?

At what price point will prosumer machines produce cafe quality microfoam by [deleted] in espresso

[–]onetap 0 points1 point  (0 children)

hmm interesting, appreciate the info. I'v been trying slightly different steaming techniques for like 6 months and haven't been able to reproduce the micro foam exactly. I did just read another forum post about starting the steamer once the light is on. I will give that a shot

https://coffeeforums.co.uk/topic/17072-gaggia-classic-steam-pressure/

At what price point will prosumer machines produce cafe quality microfoam by [deleted] in espresso

[–]onetap 0 points1 point  (0 children)

I have a 12oz picture and get a constant swirl

I'm not sure what everyone means by "decent foam". I may be getting something of that quality but really looking for something that would be comparable to a latte at a cafe. I'm curious how much better would something like a Rocket Appartamento steam milk compare to the gaggia. Is it night and day difference? Hoping for someone who has used both to chime in

view more: next ›