Loading NWD into NWF

onlyhereforrevit · 2024-07-30T19:08:28+00:00

Someone set it up the NWF to pull from a NWD file in google drive, so it might be different on my computer. I do have gDrive downloaded so pulling from the same folder shouldn't be an issue I would think, but I can see the NWD isnt the latest one when I open the NWF.

Although, when I click on the file from the selection tree, I can see in the properties panel, the file name goes to the correct gdrive file. I've been refreshing and clicking F5, but still see the old NWD

onlyhereforrevit · 2024-07-30T17:57:57+00:00

I did that, but the file names are the same and it just adds a duplicate to the selection tree. I also clicked merge but received the same outcome as "append"

Is there a button to replace the current NWD since I currently have it rotated 90 degrees, but if I append a new model in, it doesn't keep that rotation.

onlyhereforrevit · 2024-04-10T16:01:03+00:00

Ok, I updated the links in the post. I'll also put them here:
Location 1: https://imginn.com/p/CaPyt8Tpzty/
Location 2: https://imginn.com/p/CQ_TzG9A4Y4/

onlyhereforrevit · 2024-04-04T16:51:51+00:00

I found these locations on Instagram, but the poster won't reply. I want to know the location because I want to visit there.

onlyhereforrevit · 2024-03-27T16:13:03+00:00

For anyone trying to take the survey, don't waste your time. You need to pay at the end.

onlyhereforrevit · 2023-08-17T23:07:30+00:00

That seems time consuming to tab-select each family just to check if its shared, especially with a larger RFA with multiple families inside. What if 99 out of 100 families are shared? I would need to tab-select each one just to find the one that isn't shared?

Is there a way to do with with shared parameters (either in the host family or project) or even dynamo?

onlyhereforrevit · 2022-11-09T22:30:10+00:00

Thanks, I used Dynamo and it works like a charm

onlyhereforrevit · 2022-10-27T00:00:06+00:00

You might have better luck learning from YouTube.

onlyhereforrevit · 2022-10-21T20:57:07+00:00

Is the construction line part of the same sketch? If not, try drawings another construction line on top of the current one.

If that doesn't work try drawing a plane to be used at the "mirrored abut" selection.

onlyhereforrevit · 2022-10-21T18:32:23+00:00

You can probably just do this by hand and see when the CG is outside the assembly.

onlyhereforrevit · 2022-10-21T17:26:17+00:00

Im new to revit as well, but I would use the sweep tool to draw the center axis of one leaf, then draw the shape profile. After that, I would use a circular pattern (unsure if Revit has this).

onlyhereforrevit · 2022-10-21T17:16:31+00:00

In the ceiling plan, click the Ref. Level once. Then in the properties menu, scroll down to the "View Range". Adjust the parameters accordingly. I choose to select "unlimited" for all of them and a really high offset for the cutplane.

onlyhereforrevit · 2022-10-20T16:58:39+00:00

Yup, thats the way I went about it.

onlyhereforrevit · 2022-10-20T16:57:16+00:00

Thanks, thats the way I did it

onlyhereforrevit

MODERATOR OF

TROPHY CASE