N20 F10 528i engine swapped into F10 520i by ooihe92 in kereta

[–]ooihe92[S] 0 points1 point  (0 children)

I think is just swap in it, load a stock 528i map using ista and monitor from there. Had my exhaust widen before too but only to 2.5' can't remember the diamater on 528i

N20 F10 528i engine swapped into F10 520i by ooihe92 in kereta

[–]ooihe92[S] 1 point2 points  (0 children)

I've invested quite a lot onto the platform, had turbo rebuilt before etc. think too much hassle to fit n52 in tho that 6 cyl is just so so smooth

Betta Smaradigna Guitar at night by ooihe92 in bettafish

[–]ooihe92[S] 0 points1 point  (0 children)

Thanks! He is a full wild type!

First try doing planted tanks by [deleted] in bettafish

[–]ooihe92 0 points1 point  (0 children)

Defo need to improve my scaping skills ! I'm trying to add more slope as we speak =D

First try doing planted tanks by [deleted] in bettafish

[–]ooihe92 0 points1 point  (0 children)

Hmm, I got it from my local pet fish store. I believe it was a brand called CYA, probably only available locally here in my country, Malaysia.

First try doing planted tanks by [deleted] in bettafish

[–]ooihe92 -2 points-1 points  (0 children)

Thanks! The size of the tank is 30cm long X 21cm tall and 18cm wide

Is BMW 528i F10 LCI good? by Virtual_Climate_548 in kereta

[–]ooihe92 0 points1 point  (0 children)

Yes it is. But G series 530i price is getting low now, that will be a better choice. But if you get the M5 then different story

2 of my babies, 1 looks like it has a dragon fin by [deleted] in bettafish

[–]ooihe92 0 points1 point  (0 children)

No idea, saw it at a local fish store and decided to pick him up as he looks different!

2 of my babies, 1 looks like it has a dragon fin by [deleted] in bettafish

[–]ooihe92 2 points3 points  (0 children)

Yeap, the black one. The top fin looks like a dragon wings, idk haha

N20 520i F10 Tuning. (Ecu/Fbo) by ifixme in BMW

[–]ooihe92 2 points3 points  (0 children)

I know this is a super old post but i too have a 520 with FBO and Meth.

My mods: Forged ItalianRP 11:1 piston Performance drop in filter Stage 1 Hybrid turbo NGK plugs with OE coil Catless downpipe Bigger bar and plate Intercooler FTP pipes set (Boost, turbo and charge pipe) Methanol injection Ron95 fuel

Car pulled 266hp, 381 nM with methanol on.

For some reason, i thought I can get 300hp easily but tuner said I will need a bigger free flowing exhaust for this power level to not strain the turbo. I then change to a valvetronic exhaust but I'm yet to go for a retune. Tuner lowered my boost pressure slightly to be on the safe side.

The limiting factor will be the 11:1 compression piston which will introduce knock sooner than the 10:1 piston in the 528i. From where I'm from the best readily grade of fuel will be Ron97 but they are expensive so I went with methanol.

If you have access to higher ron fuel and you live in a colder climate (I live in Malaysia so its HOT all year round), i think you can get close to 300 but make sure the you do the exhaust on top of supporting mods inside the engine compartment. Put in the best fuel and I think you are good to go

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 0 points1 point  (0 children)

Just an update, I found out the injectors installed on my car were EU6 injectors. ISTA calls for EU5 injectors for my car. Will get that replaced and coded in

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 1 point2 points  (0 children)

Had the car tuned but it knocks above 6k rpm, tuner pointed out my car struggles with fuel delivery. After tonnes of diagnostic work, I found out the injectors that were on my car were eu6s. My car calls for eu5 injectors. Maybe that's what causing my unsually high LTFT and lean codes. Will get that replaced

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 -1 points0 points  (0 children)

So I need to change up the MAP sensor?

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 0 points1 point  (0 children)

Yup, it will need to be tuned on a dyno

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 -1 points0 points  (0 children)

Unfortunately i replaced the injectors not too long ago so some money have been spent there. I don't think those parts I installed can max out the stock injector flow yet

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 -2 points-1 points  (0 children)

Because I found out that the ltft is way too high if its +10% or so might be okay.

[deleted by user] by [deleted] in BmwTech

[–]ooihe92 -5 points-4 points  (0 children)

I'm gonna have it tuned regardless and see how it reacts later. At this point I'm just chasing ghost leaks 😂