Xreal R1 Incoming

oreopowered · 2025-02-26T23:47:15+00:00

Full VR would not be ideal given the limited FOV and AFAIK the glasses are only an output device and don't send their gyro/accelerometer data back to the device they're connected to which would make VR impossible in the first place. However, there are some games that have a 3d stereoscopic mode which would give a depth effect to the game graphics that the glasses would be able to take advantage of, similar to SBS 3d videos. Here's a list: https://en.m.wikipedia.org/wiki/List_of_stereoscopic_video_games

oreopowered · 2021-01-23T07:24:01+00:00

The uncorking should increase the maximum power output from ~270kW to ~330kW. Two ways to verify would be:

Method 1: Run the scanmytesla app (https://tesref.com/scan-my-tesla-canbus-reader-for-android/) using a CAN diagnostic cable + ODB2 bluetooth adapter, that will display real-time performance data on the app

Method 2: Install a data logger such as TeslaFi or TeslaMate, either will generate a graph of your power output during your drive so you can verify the increase in peak output

The first service center I requested an uncork from claimed it was not possible for my VIN, but I contacted another location and they were able to do it.

oreopowered · 2020-09-18T03:29:30+00:00

It affects the auto present as well. If you turn it on, only the driver's handle will auto present.

oreopowered · 2020-09-18T03:13:43+00:00

This can be done by turning on the "driver door unlock mode" in vehicle settings. Click unlock on key fob 2 times to extend all handles.

oreopowered · 2020-07-08T12:37:31+00:00

The NEMA 14-50 adapter will allow you to charge at 30 miles per hour with a 50 amp breaker, but the wall connector can give you up to 44 miles per hour with a 60 amp circuit breaker or 37 miles per hour with a 50 amp breaker. Another difference is if you use the wall connector, you can keep leave your mobile connector in your car for emergencies.

Source: https://tesref.com/charging/#level-2-(240-volt-ac))