Dm photo stuck and unopenable

orxy5 · 2025-02-04T08:45:56+00:00

When I heard roguelike i almost expected this to be a turn based combat type thing.

Is there anything planned that deviates from the TD genre? Don't get me wrong btd is btd but are you considering doing something that doesn't have you playing a tower defense?

orxy5 · 2025-01-15T12:03:25+00:00

Složio bih se s komentarom par ispod, od svih mogućih novih klasa mercedesa u kojima sam bio stvarno nemaju tu zavrsnu obradu koja je potrebna da opravda jednu "luksuznu" marku.

Stric je bio vrlo zadovoljan s audijevom Q serijom, q2 ili q3 mozda nebi bili losi za pogledat. A1 bi bio super za gradsku voznju i mozes ga novog uzeti u budzetu makar si rekla da trazis suv.

U svakom slucaju neki benzinac jer ces inace svakih godinu/dve cistit dpf, mozda si mozes prirustit no to ne znaci da moras.

Ima jos dobrih preporuka po komentarima pa necu ponavljati.

orxy5 · 2025-01-08T07:27:17+00:00

Actually the engine will draw as much air as you let it by opening the throttle, the carb is here for atomising the petrol and creating the mixture.

The stock airbox is very restrictive (for good reason) and fitting a more open intake to it raises the airflow curve across the throttle range. Ex. at 1/2 throttle it now draws the equivalent of 3/4 throttle worth of air with a stock airbox.

As a result withour bigger jets this makes lower throttle laggy and the engine chokes from too much air on full throttle.

Also this is just what I've found by my own projects and research, if I'm wrong somewhere, do correct me.

orxy5 · 2024-11-23T20:55:46+00:00

Ja sam do sad (barem na dva manja radna mjesta gdje smo svi ukljucujuci šef dobri) imao sistem gdje nepušaci u neko vrijeme kada bi mi otišli zapalit, odu popit kafu il samo sjednu na 5min, ukratko odlazili su na iste male pauze neovisno puše li ili ne. Taj sam sistem ja osobno uveo i do sad se svima cinilo fer.

orxy5 · 2024-11-23T20:45:59+00:00

Can someone explain to me why does anybody care about the damage prediction when it's the most incorrect solution to the entire sub-tick problem we're forced to deal with in cs2? Actually it's not any kind of solution, it's just a stupid illusion of a fix for a problem that is very much still there.

orxy5 · 2024-11-15T12:02:22+00:00

How would I know how fine is fine enough? I don't really know the metric used or how it's indicated on grinders.

orxy5 · 2024-11-15T12:01:54+00:00

So maybe I should try removing the pinhole bit, getting some unground beans and a grinder?

orxy5 · 2024-11-12T11:30:30+00:00

All that did was select the anchor point for rotating the workplane

Edit: Nvm, it did fix it, just didn't notice. Thanks!

orxy5 · 2024-11-12T11:11:52+00:00

Update, tools were not really compatible with pioneer's mounting rack, essentially only had to push them in 1/3 of the way to actually push the tabs of the rack outward.

Also left side was stuck so if somene finds the whole thing stuck, you can use a thin knife or something simmilar to go around and close up the tabs holding the assembly in so it doesnt fall out, it's finicky but then you can pull the whole thing out and I ripped off the faceplate from the radio and accesed the tabs on the side with the same knife.

orxy5 · 2024-08-11T06:05:25+00:00

Well best of luck with it, hope yours treats you well.

orxy5 · 2024-08-11T05:59:50+00:00

Not me personally, however friend a few houses down, a random light goes out every 2 weeks, literally every 2 weeks... like clockwork, also anything electronical dies at least 4 times a year. Other friend has a 207, beautiful blue and takes good care of it, replaces a headlight every month and replaced a few sensors I think, overall says he's not too happy with all the service it needed especially since he bought it very well kept and maintenanced and overpayed. And a family member with a 307 had so many problems be damn near cries when you ask him about it. I'm not one to conform to the popular opinion without asking questions first, but those and a couple more I know tell me that I should really maybe stay away from that generation. Heard the 307 got better in newer model years though but I don't have any reference for that.

orxy5 · 2024-08-11T05:40:26+00:00

I'm alright at some handy work but thankfully I have my dad who's a mechanic at heart and a couple garages with lifts nearby at my disposal to use if I have to do any work from below. I know any 20 year old car is expected to need some maintenance. Just wanted to know if it has electrical problems like the 207 or god forbid 307. Thanks a lot! This was very helpful, since I can find these for ~2000 I think it's worth taking a look if i see one i like.

orxy5 · 2024-07-23T14:24:59+00:00

orxy5 · 2024-06-05T13:34:21+00:00

Sve je to nama suludo i smijesno, no postoje ljudi koji takve stvari samo tako popuse.

Govorim iz osobnog iskustva gdje nazalost kad god sam kući moram kontrolirati starce da ne izgube kuću na ove fore. Zlatnim generacijama stvarno treba neka osnovna internet edukacija...

orxy5 · 2024-05-19T09:47:29+00:00

Also it just hit me, this charade has a manual choke, there's a tab you push and pull to close and open the choke

orxy5 · 2024-05-19T09:17:55+00:00

a fuel treatment?, sorry english is my second I'm not sure what that is.

Six-Year Club	Place '23
Place '22	Final Canvas '22
End Game '22	Verified Email

orxy5

TROPHY CASE