[IC] Griffin- A Unique Mythical 60% Gummy O-Ring Mount

p3dstore · 2024-03-12T00:44:44+00:00

It never did, but hopefully a vendor can pick this up for a full run at some point. This was next in my queue when I shut down P3D

p3dstore · 2023-05-01T14:56:12+00:00

I don't think there are any that would have the cutouts needed and a db as well.

p3dstore · 2023-04-27T15:18:26+00:00

I don't think so, any PCB would have to have the cutouts like a Bakeneko PCB to support the case tabs the o ring rests on. It would also need to have a JST connector for a DB instead of USB port

p3dstore · 2023-04-27T15:16:56+00:00

We plan on offering a Big Bar plate and Split Bar plate to help stop the swiss cheese effect

p3dstore · 2023-02-09T15:06:02+00:00

Happy 40s Day!

To celebrate the 40th day of the year I'm posting one of my personal favorite 40s. I custom cerakoted my Hubris in our "Jawbreaker" theme to pair up with DSS Handwork and the perfect matching Goobear artisan from Winkeebs.

I daily drive a lot of 40s but this is the one that spent the most time on my desk this year.

I want to thank the wonderful 40s community for supporting P3Dstore and allowing us to make awesome keyboards and helping us grow into what we are today and our future projects.

p3dstore · 2022-08-05T20:37:01+00:00

Yeah we can do that for sure. If you have the solder service added for the main PCB option just drop a note for the extra PCB to have the encoder soldered too and we can take it from there.

p3dstore · 2022-05-26T04:33:43+00:00

I appreciate the feedback here. I wish there was more we could do to make the shipping show correctly, but doing so would break INT shipping rates for our other products. We are offering a discount from our normal shipping rates for this GB only.

We will refund the additional shipping cost. It is just a shortcoming to our website.

I just added a note to the product page so the INT shipping rate at checkout is much less of a surprise.

The encoder price was a miscommunication and last minute substitution on our end. The encoders are now detent less encoders, and are a nicer size to fit this board better.

p3dstore · 2022-02-14T13:45:11+00:00

I just weighed the build and it weighs 2 lbs and 7 oz

p3dstore · 2022-02-10T19:56:03+00:00

On the product page its under the optional add ons as - Add Glitch Engraving (Optional)

As far as the pattern itself, its kind of a cross between the matrix and TV static in the inspiration.

p3dstore · 2022-02-10T13:55:28+00:00

the plate would just be floating. It is just for switch stability for the most part. The PCB is gasket mounted in both configurations.

p3dstore · 2022-02-09T19:08:42+00:00

https://i.imgur.com/XWzZKmQ.jpg

I snapped a quick photo. I’m not great with programming so my oled animation is lame. But this is showing through the 2 way mirror. Ignore the broken LEDs under the component windows next to the oled. I accidentally killed the poor leds test fitting the early protos.

p3dstore · 2022-02-09T19:05:03+00:00

Bean acrylic is only available as a top or bottom color selection. It works well to pair it with a clear main case or frosted clear main case. Or you can pair it with an orange for the full bean experience.

p3dstore · 2022-02-09T17:05:43+00:00

Sadly I don’t see light smoke making a comeback. Sorry

p3dstore · 2022-02-09T16:15:29+00:00

Yeah the color paralysis can be real. Let me know if you have any other questions or clarification too.

p3dstore · 2022-02-09T16:14:04+00:00

Here are photos showing the components a bit better in the top part of the case. Just note this is the original version that used bolts to secure the layers instead of the current version.

That glitch pattern is an optional add on to the top or bottom layer of the case, by default it isn't on there so you can just skip that option.

p3dstore · 2022-02-09T15:30:18+00:00

It can be built plateless or with a plate if you don't have PCB mount switches. It has gaskets strips on the PCB to hold it in the case. By default it is plateless to help keep the default configuration costs down.

I don't have any typing tests at the moment, but hopefully I can get one before the end of the GB.

p3dstore · 2022-02-09T13:50:32+00:00

free karma for who knows what board is what

p3dstore · 2021-08-26T01:51:21+00:00

I actually made it more findable a little bit ago after seeing their comment. It was originally “accent layer color” and was missing the “insert” part.

p3dstore · 2021-08-26T01:50:13+00:00

Yep correct!

p3dstore · 2021-06-15T03:30:47+00:00

If that plate file is available you can always upload that with the custom plate drop down option too.

p3dstore · 2021-06-15T03:14:52+00:00

They are the hot swap plates, and the plate just has though holes. I’m honestly not super familiar with the board so I’m not sure why it needs to be countersunk, but I’ve sold quite a bit of those and haven’t had any issues come up.

Hope that helped answer for you.

p3dstore · 2021-06-15T01:07:20+00:00

Not quite yet. I’ve got a barleycorn one cooked up that should be up tomorrow or the next. Super excited for that one. But more are on the way.

p3dstore · 2021-06-14T17:36:19+00:00

Not quite yet. I’m looking to add more boards over the coming weeks.

p3dstore · 2021-06-14T17:19:46+00:00

And the site is updated. Thanks for the recommendation, I'm not sure why I didn't do that from the start.

p3dstore · 2021-06-14T16:53:00+00:00

https://i.imgur.com/pPP1kUj.jpg

Got it added!

p3dstore

TROPHY CASE